• 한국연초학회지
• /
• 제10권1호
• /
• pp.75-82
• /
• 1988

Cigarettes were made using a triple filter with several porous materials in its cavity. The removal effect of the adsorbents on carbon monoxide and hydrogen cyanide in cigarette smoke was investigated with the variation of their surface area and pore volume distributions. Several attempts were made to activated coconut shell based char under the fixed steam purging rate. 1. The specific surface area increased in number of micropore. It was found for transitional pore to have a little effect on the total surface area. 2. A Small amount of the particulate matter adsorbed on the adsorbents with transitional pores, Zeolite showed a little effect on the carbon monoxide adsorption though its small pore volume, but there was no significant difference in the adsorption capacity zeolite and the others. 3. In the adsorption for hydrogen cyanide as a vapor phase in cigarette smoke, the adsorption effect of the adsorbents increased remarkably with increasing their surface area and number of micropore. It was considered that the adsorbents with small pore volume like molecular seive 4A, in which the capillary diffusion of adsorbates could not be able, would not be effective for the adsorption of hydrogen cyanide.

• Composites Research
• /
• 제36권2호
• /
• pp.80-85
• /
• 2023

원통형 복합재 격자 구조는 필라멘트 와인딩 공법으로 제작되며 제작 공정에서 두께방향 섬유체적비 불균일이 발생할 수 있다. 섬유체적비 불균일은 구조의 강성에 영향을 미칠 수 있으며 강성 및 좌굴 특성이 변화할 수 있다. 본 연구에서는 두께방향 섬유체적비 불균일이 복합재 격자 구조의 비틀림 좌굴 하중에 미치는 영향에 대하여 분석하였다. 섬유체적비 변화에 의한 강성 변화를 유한요소 모델에 적용하였고 비틀림 하중을 가한 뒤 좌굴 해석을 수행하였다. 두께방향 섬유체적비 편차에 따른 좌굴 하중을 비교하였다. 섬유체적비 불균일에 의해 비틀림 좌굴 하중이 저하될 수 있음을 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.459-464
• /
• 2017

The volume expansions of $Ti_{0.95}Zr_{0.05}V_{0.4}Mn_{1.45}Fe_{0.1}Cr_{0.05}$ alloy during hydrogenation with various conditions have been investigated. The theoretical volume expansion measured with XRD for this alloy with hydrogenation was 21%. The apparent volume expansion of this alloy ingot with hydrogenation was composed of two effects. One is a hydrogenation and the other is a pulverization. The apparent volume of free alloy powder was 1.8 times greater than that of an ingot, implying the pulverization effect on the apparent volume expansion is 80%. The apparent volume expansion of the alloy ingot with hydrogenation under a unconstrained condition was about 80 (${\pm}15$)%, much smaller than that of free alloy powder which expected as 118%. In addition, The apparent volume expansion of the alloy ingot with hydrogenation under a constrained condition(Al container) was about 50%, much smaller than that of the unconsrained. This reduced apparent volume expansion of the alloy ingot could be attributed to an arrangement of alloy powder keeping its original shape of the ingot even after hydrogenation.

• 대한환경공학회지
• /
• 제35권1호
• /
• pp.38-44
• /
• 2013

D하수처리장의 송풍량을 효과적으로 조절하는 시스템을 구축하기 위해 2011년 1월 1일부터 2012년 8월 31일까지 포기조 DO 농도를 평균 2.1 mg/L로 유지하면서 유입유량, 유입농도, 유입부하, 수온, F/M비, 생물반응조의 MLSS 농도 변화에 따른 송풍량 변화를 검토하였다. 그 결과 동일한 DO 농도를 유지하기 위한 송풍량 변화폭은 매우 크며, 송풍량 산정을 결정하는 주요 인자는 수온, F/M비, $BOD_5$ 유입 부하, T-N 유입 부하로 나타났다. 그 중 가장 큰 영향을 주는 지표는 수온으로 수온 $1^{\circ}C$ 증가는 $45.8m^3/h$의 송풍량을 증가시키는 것으로 나타났으며, 이는 계절의 영향이 반영된 것으로 사료 된다. 하절기에는 유입 유량증가, 낮은 MLSS농도, F/M비 증가의 영향과, 동절기에는 유입 유량감소, 높은 MLSS농도, F/M비 감소 등의 영향이 송풍량에 반영되어, 수온 변화에 따른 필요 송풍량 변화를 더욱 가중시킨 것으로 사료된다. 따라서 호기조 송풍량 산정 시에는 유입유량, 유입 $BOD_5$농도, 유입 T-N농도 및 생물반응조의 MLSS농도 중 하나의 인자를 이용하는 것보다, 유입부하나 F/M비로 연산하여 접근이 필요한 것으로 사료된다.

• 한국가축번식학회지
• /
• 제16권1호
• /
• pp.47-53
• /
• 1992

This study was carried out to investage the effect of cryoprotectant concentration and equilibration time on volume change and in vitro development of intact and bisected mouse embryos by rapid freezing. When compacted morulae were rapidly frozen in 3.0 to 4.0 glycerol or DMSO with 0.25M sucrose solution, the superior(P<0.05) post-thaw survival rate was obtained at the glycerol concentration of 4.0M(89.4%) than 3.0M(71.4%) or 5.0M(42.4%), but at the DMSO concentration of 3.0M(84.5%) than 4.0M(51.1%) or 5.0M(0.0%). The optimal equilibraton time for rapid freezing of ZP-free or bisected morulae in 4.0M glycerol with 0.25M sucrose was found tobe 3 minutes. The minimal volume of compacted morulaewhich corresponded with 61 to 62% of pre-equilibrated embryo volume was obtained from equilibration for 3 minutes in both 3.0 and 4.0M glycerol solutions with 0.25M sucrose.

• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.86-92
• /
• 2005

In this paper a forward-backward can extrusion process are analyzed by using rigid-plastic FEM simulation. FEM simulation is conducted to investigate forming characteristics such as deformation modes fur different process parameters. Design parameters such as thickness ratio, punch angle, friction factor and diameter ratio are selected to study the effect of them on the pattern of material flow. The analysis is focused mainly on the influences of the design factors on deformation pattern in terms of forming load, extruded length ratio and volume ratio. It is known for the simulation that the forming load, the length ratio and the volume ratio increase as the thickness ratio (TR), the wall thickness in forward direction to that in backward direction, decreases. The various punch angles have slight influence on the forming load. length ratio and volume ratio. However friction factor have little effect on the forming characteristics such as the forming load, volume ratio and so on. In addition the forming load increases as diameter ratio (DR), the outer diameter of a can in forward direction to that in backward direction, increases. Furthermore the extruded length ratio is lowest with a certain value of DR=0.85 among diameter ratios. Pressure distribution exerted on the die-material interface is illustrated schematically.

• 약학회지
• /
• 제33권1호
• /
• pp.15-19
• /
• 1989

The effects of Gypsophila saponin, sodium dodecylsulfate (SDS) and Triton X-100 on volume changes and fragility of red blood cells were compared to ginseng saponin to elucidate whether there are any difference in their action on membrane lipid. Cell volume was decreased to about 38% in 1M NaCl and increased to about 20% in 1/10M NaCl. Hematocrit value was decreased by Gypsophila saponin, SDS, and Triton X-100 which caused hemolysis in isotonic NaCl solution. These detergents also inhibited increase of cell volume and accelerated hemolysis in hypotonic solution. However, ginseng saponin did not influence to osmotic volume changes and hemolysis of red blood cells. These results suggest that the disruptive effect of plant saponin on membrane barriers induced by removing membrane lipid is different from their source and ginseng saponin has very low affinity to membrane lipid.

• 상하수도학회지
• /
• 제28권5호
• /
• pp.509-516
• /
• 2014

This study describes a reasonable planning method for water meter replacement which can minimize the metering under-registration for an increasement of revenue water. The increment analysis of real water usage was used to establish a replacement plan. The meter replacement database collected from K City was used as the basis of this analysis. The database included 964 connections of domestic and non-domestic consumers that had their meter replaced by aging at 2011. The result showed that the corelation between unregistered water volume and water meter age was lower than commonly expected where the current criteria of replacement is only water meter age(8 years) excluding the meters older than 13 years. And in the analysis result of water usage for 8 years, the total amount and increment of water usage had a significant effect on unregistered water volume. However the relation was different tendency as a total volume and slope of increment. In case of total water volume was larger than 10,000, larger than 7,000 and increment of 0.0 ~ -0.3, larger than 6,000 and increment more than -0.3 were analysed to need a replacement because of metering under-registration.

• KSBB Journal
• /
• 제31권3호
• /
• pp.178-185
• /
• 2016

Aging of the face is mainly related to the features that are sagging or loss of elasticity of the skin by reducing the volume around the eyes or cheek. Intrinsic aging can be seen to cause thinner dermis, reduction of extracellular matrix and subcutaneous fat. This study was carried out to investigate the skin volume augmentation and anti-wrinkle effects of Tribulus terrestris fruit extract. Skin anti-aging effect of Tribulus terrestris fruit extract was evaluated by using lipid accumulation, expressin of type I procollagen and elastin in preadipocytes and human dermal fibroblasts. Tribulus terrestris fruit extract augmented preadipocytes differentiation about 56% at 100 µg/mL. The type I procollagen and elastin were increased about 35% and 25% by treatment 20% Tribulus terrestris fruit extract, respectively. The clinical study also showed that skin sagging, skin elasticity, and dermal density improved without adverse effect following 4 week application of cream containing 2% Tribulus terrestris fruit extract. We suggest that Tribulus terrestris fruit extract can have the good possibility as skin volume augmenting, skin elasticity and wrinkle improving agent.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.171-176
• /
• 2008

As one way of design optimization of two-stage two-cylinder rotary compressor used for R410A heat pump application, displacement volume ratio, being defined by the ratio of the second stage cylinder volume to that of the first stage, has been varied and its effect on the compressor performance has been investigated by a computer simulation program. For simplicity, only the cylinder height of the second stage was varied to change the volume ratio. With increasing the volume ratio in the range of VR=$0.55{\sim}0.9$, volumetric efficiency increased monotonically, but adiabatic efficiency showed a maximum at around VR=0.6. Mechanical efficiency was little influenced by the volumetric ratio. As a consequence, maximum improvement of the compressor performance was found at around VR=0.7. Compared to a one-stage two-cylinder rotary compressor with about the same cooling capacity, COP improvement was about 6.96%.