• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.117-124
• /
• 2009

The purpose of the study was to improve quality of high volume fly ash concrete. The study evaluated on the possibility of early quality improvement of high volume fly ash concrete with early strength gain admixture ('GA' below) developed by the preceding research. The study regarded applying naphthalene admixture ('NA' below) to mix proportion substituting FA 15 % to be plain. In the event of substituting FA 20, 25 and 30 %, the study compared engineering properties of concrete with plain by applying GA. Because of features of fresh concrete, fluidity falls down when GA is applied. Therefore, its use amount shall be increased. Only, in W/B 60 %, it was beneficial since slump loss was reduced about 35~70 mm than plain. The study could see that AE use should be increased proportionally since air content was reduced by coming from AE absorption operation of unburned coal content included in FA according to an increase in the amount of FA use. Reduction effect of bleeding could be anticipated since the amount of bleeding appeared at least in FA 20 %. Because of hardened concrete, time of setting appeared in the same level as plain when GA was applied. Therefore, it is judged that delay of setting can be reduced. In compressive strength, the study could check the same strength development as plain when GA was applied, having nothing to do with W/B and curing temperature. However, it is thought that we shall pay attention to GA use in the event of FA 30 % substitution. Freezing and melting resistance had less early value than plain. However, it is judged that there will be no problem of frost resistance since there is no a large difference between freezing and melting resistance and plain in overall. In accelerated neutralization, it was analyzed that a problem of weakening in neutralization appointed as a demerit when FA was applied in mass in proportion with GA use could be settled to some extent.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.5
• /
• pp.643-650
• /
• 2007

It has been known that Samultang has positive effects on blood circulation and erythrocyte formation. Samultang was composed of four ingredients, Angelica gigas Nikai, Rahmanniae Radix Preparata, Paeonia lactiflora Pallas, and Cnidium officinale Makino. Five types of bread were prepared by replacing water with Samultang for dough proportionally. Control (C) did not have Samultang and the other four experimental bread contained Samultang: S-I (25% of water was substituted by Samultang), S-II (50% substituted), S-III (75% substituted), and S-IV (100% substituted). Moisture, protein, and ash contents of Samultang were $97.34{\pm}0.11%,\;0.42{\pm}0.04%,\;and\;1.40{\pm}0.16%$, respectively. Replacing water with Samultang decreased pH and increased significantly wet gluten content of the dough. Substitution of Samultang for water incremented redness and yellowness of the dough and bread and increased hardness. It also raised the contents of ash and protein. Although it was not significant, in addition, moisture loss of the bread during storage seemed to be lessened by replacing water with Samultang. However, total volume and specific loaf volume of the bread, baking loss rate, and the other textural characteristics except hardness were not affected by substituting water with Samultang. Due to the above results, sensory evaluation of volume and gumminess of the bread were improved significantly by substituting Samultang for water. The bread replaced 25% of the water with Samultang was ranked as the best by the test of sensory evaluation. These results imply that adding Samultang instead of water to dough for bread might bring positive effects on quality characteristics of the bread without any adverse influences. Therefore, it might be worth developing functional bread using Samultang.

• Journal of Intelligence and Information Systems
• /
• v.27 no.4
• /
• pp.23-48
• /
• 2021

The Korean economy has achieved continuous economic growth for the past several decades thanks to the government's export strategy policy. This increase in exports is playing a leading role in driving Korea's economic growth by improving economic efficiency, creating jobs, and promoting technology development. Traditionally, the main factors affecting Korea's exports can be found from two perspectives: economic factors and industrial structural factors. First, economic factors are related to exchange rates and global economic fluctuations. The impact of the exchange rate on Korea's exports depends on the exchange rate level and exchange rate volatility. Global economic fluctuations affect global import demand, which is an absolute factor influencing Korea's exports. Second, industrial structural factors are unique characteristics that occur depending on industries or products, such as slow international division of labor, increased domestic substitution of certain imported goods by China, and changes in overseas production patterns of major export industries. Looking at the most recent studies related to global exchanges, several literatures show the importance of cultural aspects as well as economic and industrial structural factors. Therefore, this study attempted to develop a forecasting model by considering cultural factors along with economic and industrial structural factors in calculating the import volume of each country from Korea. In particular, this study approaches the influence of cultural factors on imports of Korean products from the perspective of PUSH-PULL framework. The PUSH dimension is a perspective that Korea develops and actively promotes its own brand and can be defined as the degree of interest in each country for Korean brands represented by K-POP, K-FOOD, and K-CULTURE. In addition, the PULL dimension is a perspective centered on the cultural and psychological characteristics of the people of each country. This can be defined as how much they are inclined to accept Korean Flow as each country's cultural code represented by the country's governance system, masculinity, risk avoidance, and short-term/long-term orientation. The unique feature of this study is that the proposed final prediction model can be selected based on Design Principles. The design principles we presented are as follows. 1) A model was developed to reflect interest in Korea and cultural characteristics through newly added data sources. 2) It was designed in a practical and convenient way so that the forecast value can be immediately recalled by inputting changes in economic factors, item code and country code. 3) In order to derive theoretically meaningful results, an algorithm was selected that can interpret the relationship between the input and the target variable. This study can suggest meaningful implications from the technical, economic and policy aspects, and is expected to make a meaningful contribution to the export support strategies of small and medium-sized enterprises by using the import forecasting model.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.7
• /
• pp.1017-1024
• /
• 2011

Korean wheat semolina (FS: fine semolina) with similar characteristics to durum wheat semolina was substituted at rates of 0, 10, 20, 30, 40, and 50% in pasta dough and the physical and cooking characteristics were investigated for making optimal pasta. Water absorption of the dough increased with the 10, 20, and 30% substitution ratio of FS. Development times were high with >30% substituted FS. This result positively influenced an increase in production and the preparation of the fresh noodle pasta. Furthermore, soft textured fresh noodles could be made due to the decrease in stability and increased weakness of the >30% substituted FS. The amylograph gelatinization characteristics of Korean wheat semolina exhibited an increase of gelatinization temperature and decrease of maximum viscosity when compared with durum wheat. The handling property of the dough showed more than 4 points in all sample groups. Weight and volume decreased and turbidity and cooking loss increased according to the increasing amount of substituted FS. However, samples with ${\leq}$ 30% FS substitution ratio had similar volumes and cooking losses when compared to the control. The L- and a-values increased and the b-value of color decreased as more FS was added. In a texture analysis, the hardness of the cooking noodles showed a low value with the >30% substituted FS. Springiness, gumminess, and chewiness exhibited a high value. In the results of a sensory evaluation, overall acceptability was high score with more than 7 points for the 30% added FS. The preferences for pasta colors were divided into white, which is similar to the Korean traditional noodle, and yellow, which is similar to durum wheat. Flavor and taste were not affected by substituting with FS. Low hardness and high chewiness was the most preferred noodle. These results suggest that >30% substituted FS was suitable for increasing quality and organoleptic qualities of Korean wheat pasta.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.3
• /
• pp.253-259
• /
• 2010

This experiment was conducted to evaluate water use efficiency of barley, wheat, and millet as a substitution crop for rice of fallow paddy field. Dry weight (DW), evapotranspiration, and transpiration of crop grown on the lysimeters controlled with 5 levels of groundwater table (GWT), 0, 25, 50, 75, and 100 cm were evaluated for optimum GWT and water use efficiency. All the lysimeters randomized with four replication arrangements were filled up sandy loam and were adjusted to the constant bulk density treated with twice water infiltration from bottom side to upper side of lysimeter. DW of barley, wheat, and millet in the plot of 0cm GWT that is saturated soil showed 34.9%, 44.7%, and 37.1% of that in the plot of 100 cm GWT, respectively showing a serious obstacle in crop growth. Evapotranspiration ratios calculated by evapotranspiration volume (mL) per DW were 166~605 mL for barley, 136~481 mL for wheat, and 81~418 mL for millet showing the order of barley > wheat > millet. Evapotranspiration ratio was increased with decrease of groundwater table that is the condition of moisture saturation. Estimation of GWT for maximum DW of wheat was 76 cm, and those of barley and millet were 100 cm below. The volumetric moisture content of lysimeter soil with cropping was markedly decreased as increase of crop growth because moisture supplying capability by capillary rise of water was less than amount of moisture required by crop.

• Journal of the Korean Chemical Society
• /
• v.46 no.3
• /
• pp.187-193
• /
• 2002

The reaction rates of substituted 6-chloroquinoline with p-substituted benzoyichorides $p-CH_3,$ p-H, $p-NO_2$ have been measured by conductometry in acetonitrile, and the constants are determined at various temperatures (10, 15, 20, $25^{\circ}C$) and pressures (1, 200, 500, 1000 bar). From the values of rate constants, the activation parameters (Ea, ${\Delta}V^{\neq}$, ${\Delta}H^{\neq}$, ${\Delta}S^{\neq}$, ${\Delta}G^{\neq}$) and the pressure dependence of Hammett p values were determined. The rate constants increased with increasing temperatures and pressures, and are further increased to introduction to the electron donor substiuents in substrate $(p-NO_2)$ with 6-chloroqinoline. When the activation volume and the activation entropy are all negative And the Hammett p values are positive for the substrate over the pressure and temperature range studied. The results of kinetic studies for pressure and substituent show that thease reactions proceed in typical $S_N2$ reaction mechanism and "associative $S_N2$" in bond formation favored with increasing pressures.

• Food Science and Preservation
• /
• v.17 no.4
• /
• pp.487-493
• /
• 2010

This study was conducted to evaluate quality characteristics of white breads with Acanthopanax senticosus extract(ASE) (0, 25, 50, 75 and 100%). Addition of ASE significantly decreased L-value, and increased a and b-values. Compared with the control bread, specific volume of bread added with ASE was increased. The cohesiveness, springiness and gumminess of the breads added with ASE were higher than those of the control group. Also, a sensory evaluation was carried out in terms of acceptability(color, flavor, taste, texture and overall acceptability). Taken together, the 50% treatment ranked the highest evaluation values, as compared to other treaments. Accordingly, to improve the quality of bread, it is recommendable to add ASE to the 50% level in substitution for water in making a loaf of bread. After all, this study was to confirm the possibility of ASE's utilization as natural materials containing the functional substance.

• Korean Journal of Food Science and Technology
• /
• v.47 no.5
• /
• pp.645-651
• /
• 2015

Sucrose in chiffon cakes was replaced with different levels of sorbitol (0, 30, 50, 70, and 100%), and the effects on the physical properties and storage stability of the cakes were measured. The specific gravity and viscosity of the batter, as well as the volume and moisture content of the cakes, decreased with increasing sorbitol content. The hardness of the cakes slightly decreased as the amount of sorbitol increased, whereas the lowest cohesiveness was observed in the cakes with equal amounts of sucrose and sorbitol. Storage for one day slightly increased the hardness of the cakes and decreased their cohesiveness. Although the amount of mold and total microbial count increased with increasing storage days at room temperature, the replacement of sucrose with 70 or 100% sorbitol was effective in suppressing microbial growth. In sensory tests, the formulation with 70% sorbitol substitution in the chiffon cakes was the most acceptable.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.769-774
• /
• 1993

Defatted rice bran was microparticulated using fluidized bed opposed jet mill and air-classified at different air classifying wheel speed (ACWS) in Turboplex classifier. The median particle size and the standard deviation decreased, and concomitantly the specific surface area increased generally with increasing ACWS. The protein, fat and ash contents of the recovered rice bran increased with ACWS. The contents of minerals; magnesium, zinc, iron and manganese; increased positively with ACWS. The phytic acid content, however, was slightly higher at middle ACWS. The dietary fiber content was highest in the ACWS 15,000 rpm fraction showing 31.47%. Higher ACWS resulted in lighter colored powder. The water holding capacity (WHC) showed the maximum value at ACWS 12,000 rpm and decreased with increasing ACWS, while the oil holding capacity (OHC) increased with ACWS. The rheological property of the microparticulated rice bran/water suspension fitted to the linear model. The yield stress and viscosity of the suspension increased with ACWS. The shape of microparticulated rice bran at ACWS 21,000 rpm was spherical, and the median particle size was $3.7{\mu}m$. When cake was prepared with substitution of microparticulated rice bran at 5%, the cake height and volume increased remarkably.

• Journal of the Korean Chemical Society
• /
• v.37 no.11
• /
• pp.923-928
• /
• 1993

The series of solid solutions in the $Sr_{1+x}Ho_{1-x}FeO_{4-y}$ (x = 0.00, 0.25, 0.50, 0.75 and 1.00) systems with $K_2NiF_4$ type structure have been prepared at 1550$^{\circ}$C under an atmospheric air pressure. The X-ray powder diffraction spectra of these samples assign that the crystallographic phases are tetragonal system over the whole x range. The lattice volume was increased with increasing the substitution amount of the $Sr^{2+}$ ion. The mole ratio of the $Fe^{4+}$ ion to total iron ions or ${\tau}$ value has been determined by Mohr salt titration of the sample and then the y value was calculated from x and ${\tau}$ values. The ${\tau}$ and y values have been increased with x values. The nonstoichiometric chemical formula are formulated from the general formula of $Sr_{1+x}Ho_{1-x}Fe^3_{1-}\;^+_{\tau}Fe_{\tau}^{4+}O_{4-y}$ replaced by x,${\tau}$ and y values. Mossbauer spectra show the mixed valence state and coordination state of $Fe^{3+}\;and\;Fe^{4+}$ ions. It is found out that the magnetic property of the samples is paramagnetic at room temperature. Electrical conductivity varied within the semiconductivity range of 1.0 to 1 ${\times}\;10^{-9}{\Omega}^{-1}cm^{-1}$. Activation energy of the electrical conductivity was decreased with the $\tau$ value. The conduction mechanism should be explained by the hopping model of the conduction electrons between the valence states of $Fe^{3+}\;and\;Fe^{4+}$ ions.