• 한국습지학회지
• /
• 제15권3호
• /
• pp.407-412
• /
• 2013

본 연구는 Low Impact Development (LID) 시설로서 도로에 적용 가능한 수목여과시설을 개발 하고자 수행되었다. 수목여과시설의 적용가능성 및 효과 검증을 위해 Test-bed 규모의 시설을 조성하여 총 17개월(2011년 6월 ~ 2012년 11월)동안 모니터링을 수행하였다. 모니터링 결과, 누적강우량 2 mm 이하의 강우시 발생되는 강우유출량은 시설내 전량 저류 되며 20 mm 이상일 경우 유입유량의 최소 20%가 시설내 저류 되는 것으로 분석되었다. 강우량에 따른 오염물질별 저감효과를 분석한 결과, Total Pb는 70% 이상의 저감효율을 보여 오염물질 중에서 저감효과가 가장 뛰어난 것으로 나타났으며 중금속, 입자상 물질, 영양염류 및 유기물 순으로 저감효과가 높은 것으로 조사되었다. 오염물질별 평균 저감효율은 60~73%의 범위로 나타났으며 소규모 강우(10 mm 미만의 강우)시 10 mm 이상의 강우 일 때 보다 오염물질이 함유된 강우 유출수가 시설 내에서 충분히 저류되기에 오염물질 저감에 효과적인 것으로 분석되었다. 본 연구결과를 활용하여 강우량, 오염물질 저감효율과 같은 LID 시설의 설계인자를 도출할 수 있었으며 물순환 효과 및 오염물질의 효율평가를 통하여 향후 본 시설과 유사한 시설의 설계시 활용 가능성이 높은 것으로 판단된다.

• 대한교통학회지
• /
• 제21권5호
• /
• pp.61-71
• /
• 2003

기존의 DDHV는 양방향 시간교통량의 합으로부터 K계수. D계수를 도출하여 산정하고 있다. 이로 인해 설계순위와 실제순위의 차이, DDHV 산정값의 오차, DDHV의 불규칙한 변동 등의 문제점이 있다. 본 연구에서는 서로 독립적인 두 방향(상행, 하행)의 교통량 중 중방향 시간교통량에서 설계대상 순위를 결정하여, K계수와 D계수를 분리하지 않고 동시에 적용하는 방법(비분리방안)을 제시하였다. 일반국도 상시조사지점 360개 지점에 대하여 30순위를 기존 DDHV 산정방법(분리방안)으로 분석결과 다음과 같은 오차가 나타났다. - 설계순위와 실제순위가 357지점(99.2%)에서 불일치 - 실제순위 특성 : 평균 80순위, 최대 1,027순위. 최소 2순위 - 설계순위와 실제순위의 오차분포 : 10시간 내(30$\pm$10시간)가 106지점(29.4%). 254지점(70.6%)은 30순위와 $\pm$10순위이상 오차 발생 - DDHV 산정값의 오차율 : 평균 8.4%, 최대 46.7% 반면, 비분리방안은 설계순위와 실제순위가 전체 지점에서 일치하고 DDHV 산정값의 오차율이 "0"이므로, AADT가 정확한 것을 전제할 경우 비분리방안에 의해 설계시간교통량 산정시 평균 50순위, DDHV 8.4%의 오차 개선효과가 있는 것으로 분석되었다.것으로 분석되었다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제18권E2호
• /
• pp.79-84
• /
• 2002

The objective of this study was to investigate the biodegradation of ethylene in an activated carbon biofilter inoculated with immobilized microbial consortium. The biofilter performance was monitored in terms of ethylene removal efficiency and carbon dioxide production. The biofilter was capable of achieving ethylene removal efficiency as much as 100% at a residence time of 14 min and an inlet concentration of 290 ppm. Under the same conditions, carbon dioxide with a concentration of up to 546 ppm was produced. Its was found that carbon dioxide was produced at a rate of 87 mg day$\^$-1/, which corresponded to a volume of 0.05 L day$\^$-1/. During operation with an inlet ethylene of 290 ppm, the maximum elimination capacity of the biofilter was 34 g of C$_2$H$_4$m$\^$-3/ day$\^$-1/. The biofilter could provide an attractive treatment technology for removing ethylene, an extremely volatile and slowly adsorbed compound.

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1489-1494
• /
• 2017

The use of a room-temperature gamma spectrometer is an issue in environmental radiation monitoring. To monitor radionuclides released around a nuclear power plant, suitable instruments giving fast and reliable information are required. High-pressure xenon (HPXe) chambers have range of resolution and efficiency equivalent to those of other medium resolution detectors such as those using NaI(Tl), CdZnTe, and $LaBr_3:Ce$. An HPXe chamber could be a cost-effective alternative, assuming temperature stability and reliability. The CEA LIST actively studied and developed HPXe-based technology applied for environmental monitoring. Xenon purification and conditioning was performed. The design of a 4-L HPXe detector was performed to minimize the detector capacitance and the required power supply. Simulations were done with the MCNPX2.7 particle transport code to estimate the intrinsic efficiency of the HPXe detector. A behavioral study dealing with ballistic deficits and electronic noise will be utilized to provide perspective for further analysis.

• Environmental Engineering Research
• /
• 제23권1호
• /
• pp.70-75
• /
• 2018

A pilot scale anaerobic fixed-bed with a reactor volume of $2.8m^3$ was built to treat slaughterhouse wastewater. Bamboo rings were chosen as support media mainly because of their cheaper price in underdeveloped countries. Even with their lower porosity and specific surface, the reactor performance showed a maximum 95% COD removal efficiency at an organic loading rate (OLR) of $1kg\;COD/m^3-d$ with its corresponding hydraulic retention time (HRT) of 7.5 d. At a higher OLR of $4.0kg\;COD/m^3-d$, the COD removal efficiency of 75% was achieved with an HRT of 2 d. No big difference in COD removal efficiencies was found between the reactors operated in both upflow and downflow modes. Their operational behavior and effluent characteristics were similar. The effluent COD/TKN ratio of 6.67 at an OLR of $4.0kg\;COD/m^3-d$ was only marginal acceptable range for a subsequent biological denitrification process. Otherwise carbon supplementation is required at a lower OLR.

• 한국항해항만학회지
• /
• 제39권5호
• /
• pp.417-422
• /
• 2015

Sea-ports in Northern Vietnam have experienced a rapid growth of container throughput in recent years. To accompany with such development, huge investment also has been performed to enhance not only local port capacity but also the regional logistics system. Container terminals in Northern Vietnam locate centrally along Cam river of Haiphong city, leaving 2 others in Quang Ninh province. Five out of totally 11 container terminals in the area are under the control of Vinalines - a national corporation in field of maritime industry. In this paper, those terminals are classified in terms of location and ownership. The volume of container throughput and facilities of all container terminals in Northern Vietnam from 2005 to 2014 are recorded in order to compare the performance of groups. A Data Envelopment Analysis (DEA) is then applied to evaluate the relative efficiency of such terminals. Before conclusion, number of suggestions will be contributed to related parties.

• 대한기계학회논문집B
• /
• 제30권7호
• /
• pp.603-611
• /
• 2006

This paper presents the response surface optimization method using three-dimensional Wavier-Stokes analysis to optimize the blade shape of an axial flow fan. Reynolds-averaged Wavier-Stokes equations with $k-{\epsilon}$ turbulence model are discretized with finite volume approximations using the unstructured grid. Regression analysis is used for generating response surface, and it is validated by ANOVA and t-statistics. Four geometric variables, i.e., sweep and lean angles at mean and tip respectively were employed to improve the efficiency. The computational results are compared with experimental data and the comparisons show generally good agreements. As a main result of the optimization, the total efficiency was successfully improved. Also, detailed effects of sweep and lean on the axial flow fan are discussed.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권2호
• /
• pp.91-97
• /
• 2003

In addition to its strong oxidizing power, the ozone has definite advantages over other commercial oxidants, namely, no undesirable by- products or residues are formed. With growing interest in the improvement of the ozone production in the industrial fields, many types of ozonizer using the electrical discharges have been proposed for the higher efficiency and the higher Performance at atmospheric Pressure. Among them, a superposition of different type discharges has been proposed. Especially, since the improvement for the low efficiency of dc discharge and narrow gap of surface discharge is required, a do and an at voltage are applied to same reaction space (or volume) to increase energy density at the same space. An investigation was focused on the superposition with a dc (streamer) corona and 3 surface discharge. This paper describes the investigation results on fundamental ozone generation characteristics by this superimposed discharge.

• 한국유체기계학회 논문집
• /
• 제12권3호
• /
• pp.7-12
• /
• 2009

In this paper, shape optimization based on three-dimensional flow analysis has been performed for impeller design of centrifugal compressor. To evaluate the objective function of an isentropic efficiency, Reynolds-averaged Navier-Stokes equations are solved with SST (Shear Stress Transport) turbulence model. The governing equations are discretized by finite volume approximations. The optimization techniques based on the radial basis neural network method are used for the optimization. Latin hypercube sampling as design of experiments is used to generate thirty design points within design space. Sequential quadratic programming is used to search the optimal point based on the radial basis neural network model. Four geometrical variables concerning impeller shape are selected as design variables. The results show that the isentropic efficiency is enhanced effectively from the shape optimization by the radial basis neural network method.

• 말소리와 음성과학
• /
• 제6권1호
• /
• pp.105-117
• /
• 2014

The purpose of this study was to (1) establish a Korean adult normative database for phonatory aerodynamic measures obtained with the KayPENTAX Phonatory Aerodynamic System (PAS) Model 6600, (2) investigate the intra-subject reliability of these measures across three testing sessions, and (3) examine the effect of gender on those measures. 170 healthy normal speakers (70 men and 100 women) between the ages 18 and 49 years participated in the study. The PAS protocol of maximum phonation and voicing efficiency were conducted and 25 measures were obtained. All aerodynamic measures taken in this study demonstrated high intra-subject reliability in clinical aspect. There were no significant effect of gender in the measures related to sound pressure and subglottal pressure. However, significant differences for gender were found for phonation time, airflow rate, expiratory volume, aerodynamic power, SPL range, pitch range, mean pitch, aerodynamic resistance, and aerodynamic efficiency. Clinicians should be aware of significant gender effects in some aerodynamic parameters when interpreting the data obtained from PAS.