• 한국시뮬레이션학회논문지
• /
• 제15권1호
• /
• pp.19-25
• /
• 2006

도시지역이 급격히 확장됨에 따라, 인구 및 교통량이 증가되어 교통 혼잡이 큰 사회문제가 되고 있다. 일반적으로 다인승전용차로는 도로의 이용효율을 증대시킬 수 있는 방안으로 알려져 있으며, 도시부 교통문제 해소의 한 방안이다. 본 논문에서는 서울의 중심 도시고속도로인 올림픽대로의 교통 혼잡을 완화하기 위한 방안으로 다인승전용차로제의 도입 가능성을 시뮬레이션 툴인 Integration을 이용하여 과학적으로 분석 평가하였으며, 향후 이러한 분석기법이 다인승 전용차로제 도입 가능성 평가에 많이 사용될 수 있을 것이다.

• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.123-130
• /
• 2009

In this paper, we designed and fabricated an input-output coupler system using two or three volume gratings at 632.8nm wavelength. The additional third grating is added at the output coupler to enhance the overall efficiency. The experimental results show that the total system throughput reaches 63% with two-grating and 75% with three-grating input-output coupler. We also present a design method to obtain the desired output power ratio between the gratings.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.445-446
• /
• 2012

Recently the interest in wireless power transfer have been studied. ECR (Electromagnetic Coupled Resonance) device, depending on the size of the frequency characteristics of the structure, increasing in volume and larger volume of wireless power transmission device to make use of ECR is a big barrier. So to solve this problem for ECR device miniaturization and high efficiency has been actively studied. In this paper, the size of the device for ECR IM (Impedance Matching) by applying a one-turn coil circuit, remove the device in the form of ECR Network Analyzer measured by removing the one-turn coil has demonstrated the possibility of the device in the form of ECR.

• 대한기계학회논문집B
• /
• 제22권2호
• /
• pp.213-220
• /
• 1998

The conventional discrete-ordinates method (DOM) is modified and developed for the analysis of two-dimensional axisymmetric cylindrical enclosure with curved wall. The objective of the present work is to extend the capability of the conventional DOM into a general axisymmetric geometry like nozzle-shaped enclosure, by adopting the arbitrary control angle as was done in the finite-volume method (FVM), while keeping the same two-dimensional solution procedure as in the conventional DOM. The present method is validated by applying it to three different benchmark problems of axisymmetric enclosure containing absorbing, emitting and scattering medium. Results presented in this work not only support the solution accuracy, but also moderate efficiency in the numerical calculation of axisymmetric radiation problem.

• 설비공학논문집
• /
• 제16권10호
• /
• pp.923-931
• /
• 2004

A multi-dimensional freeze drying analysis program, which took simultaneous heat and mass transfer, sublimation of ice and motion of sublimation front into full account, was developed using finite volume method with fixed grid. The effect due to the motion of sublimation interface was modeled by an enthalpy formulation streamlined for the freeze drying problems. The efficiency and accuracy of the program was validated by solving one- and two-dimensional freeze drying problems frequently encountered in industrial processes. Finally, the freeze drying processes of cylinder and slab objects with permeable side surfaces were simulated, which demonstrated the capability of the present analysis program in solving multi-dimensional freeze drying problems with complex sublimation interface configurations.

• Journal of Magnetics
• /
• 제18권1호
• /
• pp.65-73
• /
• 2013

In this paper, design and performance analysis of robust and inexpensive permanent magnet-assisted synchronous reluctance generators (PMa-SynRG) for tactical and commercial generator sets is studied. More specifically, the optimal design approach is investigated for minimizing volume and maximizing performance for the portable generator. In order to find optimized PMa-SynRG, stator winding configurations and rotor structures are analyzed using the lumped parameter model (LPM). After comparisons of stator windings and rotor structure by LPM, the selected stator winding and rotor structure are optimized using a differential evolution strategy (DES). Finally, output performances are verified by finite element analysis (FEA) and experimental tests. This design process is developed for the optimized design of PMa-SynRG to achieve minimum magnet and machine volume as well as maximum efficiency simultaneously.

• Steel and Composite Structures
• /
• 제48권5호
• /
• pp.583-597
• /
• 2023

This paper introduces a novel approach to multi-material topology optimization (MTO) targeting in-plane bi-directional functionally graded (IBFG) non-uniform thickness Reissner-Mindlin plates, employing an alternative active phase approach. The mathematical formulation integrates a first shear deformation theory (FSDT) to address compliance minimization as the objective function. Through an alternating active-phase algorithm in conjunction with the block Gauss-Seidel method, the study transforms a multi-phase topology optimization challenge with multi-volume fraction constraints into multiple binary phase sub-problems, each with a single volume fraction constraint. The investigation focuses on IBFG materials that incorporate adequate local bulk and shear moduli to enhance the precision of material interactions. Furthermore, the well-established mixed interpolation of tensorial components 4-node elements (MITC4) is harnessed to tackle shear-locking issues inherent in thin plate models. The study meticulously presents detailed mathematical formulations for IBFG plates in the MTO framework, underscored by numerous numerical examples demonstrating the method's efficiency and reliability.

• 한국정밀공학회지
• /
• 제14권5호
• /
• pp.15-21
• /
• 1997

In the stereolithography process, the accuracy of cured shape depends on laser power, scanning speed, scanning pattern, resin characteristics etc. When three-dimensional objects are built, higher laser power gives higher building efficiency. Normally we could control scanning speed and scanning pattern, which affect curing thickness and generate volume of curl in & after building. Olgomer, Monomer and Initiator are major components. Kinds and volume of them decide characteristic of resin. In this paper, we deal with major facts and their characteristics for precision shape building.

• 상하수도학회지
• /
• 제18권2호
• /
• pp.201-207
• /
• 2004

Dissolved air flotation (DAF) is a solid-liquid separation process that uses fine rising bubbles to remove particles in water. Most of particle-bubble collision occurs in the DAF contact zone. This initial contact considered by the researchers to play a important role for DAF performance. It is hard to make up conceptual model through simple mass balance for estimating collision efficiency in the contact zone because coupled behavior of the solid-liquid-gas phase in DAF system is 90 complicate. In this study, 2-phase(gas-liquid) flow equations for the conservation of mass, momentum and turbulence quantities were solved using an Eulerian-Eulerian approach based on the assumption that very small particle is applied in the DAF system. For the modeling of turbulent 2-phase flow in the reactor, the standard $k-{\varepsilon}$ mode I(liquid phase) and zero-equation(gas phase) were used in CFD code because it is widely accepted and the coefficients for the model are well established. Particle-bubble collision efficiency was calculated using predicted turbulent energy dissipation rate and gas volume fraction. As the result of this study, the authors concluded that bubble size and recycle ratio play important role for flow pattern change in the reactor. Predicted collision efficiency using CFD showed good agreement with measured removal efficiency in the contact zone. Also, simulation results indicated that collision efficiency at 15% recycle ratio is higher than that of 10% and showed increasing tendency of the collision efficiency according to the decrease of the bubble size.

• 한국항만경제학회지
• /
• 제26권2호
• /
• pp.139-149
• /
• 2010

세계 주요 항만들은 항만운영의 효율성 증대시키기 위해 항만시설의 확충과 개선에 많은 노력을 기울이고 있다. 본고는 세계 주요 항만과의 경쟁에서 밀리고 있는 부산항과 광양항의 컨테이너 터미널의 효율성의 특성을 파악하기 위하여 DEA 모형과 토빗모형을 이용한다. 먼저 허핀달-허쉬만지수와 기업집중률을 이용하여 컨테이너 터미널의 물동량 집중도를 조사하여 집중도는 감소하는 추세이나 상위 3개 터미널의 물동량 집중도가 상당히 높다는 것을 밝힌다. 이러한 결과는 Jarque-Bera 통계량과 왜도를 통해 변수들이 우측으로 긴 꼬리를 갖는 분포를 보여 규모가 작은 컨테이너 터미널의 빈도가 크다는 사실에서도 확인할 수 있다. DEA모형을 이용하여 부산항과 광양항의 컨테이너 터미널의 효율성을 도출하여 비효율적 DMU들의 비효율 원인은 각기 다르나, 비효율적 터미널들이 대부분 규모의 수익체증 상태에 있기 때문에 규모를 줄이는 방법보다는 규모를 확대하는 것이 효율성 향상에 보다 효율적이라는 것을 보인다. 이분산성을 고려한 토빗모형을 적용하여 컨테이너 야드당 물동량과 컨테이너 크레인당 물동량의 계수가 예상되는 부호를 가져 효율성 증대에 기여하나 컨테이너 야드가 컨테이너 크레인보다 효율성에 더 큰 영향을 미친다는 것을 밝힌다.