• 한국안전학회지
• /
• 제33권4호
• /
• pp.84-89
• /
• 2018

The number of landslides has increased since the 2000s due to the increased frequency of heavy rainfall caused by abnormal weather. A variety of debris flow prevention facilities have been installed as a countermeasure against this problem. However, it is not easy to evaluate the efficiency of debris flow prevention structures except for the structures with constant volume such as the erosion dam, because the other structures are limited to be reproduced in simulation program for debris flow. Therefore, the methods by which the debris flow prevention structures were modeled were proposed, and the efficiency of four prevention structures installed in Baekyang Mt. in Busan was evaluated with UDS, which accuracy had been verified, using these methods. The initial amount of debris flow was determined based on landslide which occurred in 2014, and specifications of the complex retaining walls around the settlements were measured and applied modeling for terrain. The numerical results showed that the efficiency of debris flow prevention structures could be quantitatively presented. Among the debris flow prevention structures installed in Baekyang Mt., prevention structure of barrier type for debris flow was the most efficiency and debris flow prevention device was the lowest efficiency when the only depth of debris was evaluated. It seems that this study is meaningful to propose the methods which were used to model the debris flow prevention structures that could not be reproduced in most 2D debris flow numerical analysis programs. If precise verification of the presented methods is carried out, it will be possible to provide clear criteria for the efficiency evaluation method of disaster prevention structures.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제11권8호
• /
• pp.259-268
• /
• 2022

데이터 양의 폭발적 증가에 따른 관리 효율성 제고를 위한 클라우드 서비스 활용이 일상으로 자리잡고 있는 현재, 데이터 프라이버시 보존을 위한 다양한 암호화 기법이 적용되고 있다. 클라우드 시스템의 방대한 컴퓨팅 자원에도 불구하고 다수 사용자로부터 아웃소싱된 데이터의 중복으로 인한 저장 효율성의 저하는 서비스 효율을 현저히 감소시키는 요인으로 작용하면서, 프라이버시가 보장된 암호문에 대한 데이터 중복제거에서의 효율성 향상을 위한 다양한 연구가 진행되고 있다. 본 연구에서는 최신 USENIX ATC에 발표된 Ren et al.의 신뢰실행환경을 활용한 암호문에 대한 중복제거의 효율성 개선을 위한 연구결과를 분석하고 서비스에 참여하는 키 관리 서버를 사용자에 통합함으로써 제3의 독립적인 키 관리 서버의 필요성을 제거하면서도 키 관리의 안정성 개선 방법을 제시한다. 실험을 통하여 제안 기법에서 약 30%의 통신 효율 개선 효과를 얻을 수 있음을 확인하였다.

• KSBB Journal
• /
• 제26권4호
• /
• pp.333-340
• /
• 2011

In this study, gemcitabine-loaded methoxy poly(ethylene glycol)-b-poly(L-lactide) (MPEG-PLLA) microparticles with different PEG block lengths were prepared by a W/O/W double emulsion technique. The present study focuses on the investigation of the influence of various preparative parameters such as the ratio of internal water phase and oil phase, polymer concentration, solvent composition of organic phase and salt concentration of external water phase on the morphology and encapsulation efficiency of the microparticles. The microparticles fabricated at high volume ratios of internal water phase to oil phase and at high polymer concentrations showed a relatively high encapsulation efficiency and low porosity. When a dichloromethane/ethyl acetate mixture was used as solvent, both the encapsulation efficiency and drug loading of the microparticles decreased as the level of ethyl acetate increased. The addition of a salt (NaCl) to the external water phase significantly improved the encapsulation efficiency up to 40%, and the microparticles became more spherical with their size and porosity decreased.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권1호
• /
• pp.42-49
• /
• 2006

In this research. the diesel cycle was thermodynamically interpreted to evaluate the possibility of high efficiency by converting diesel engines to the high expansion diesel cycle, and general cycle features were analyzed after comparing these two cycles. Based on these analyses. an experimental single cylinder a long stroke with high expansion-diesel engine. of which S/B ratio was more than 3, was manufactured. After evaluating the base engine through basic experiments, a diesel engine was converted into the high expansion diesel engine by establish VCR device and VVT system Accordingly, the high expansion diesel cycle can be implemented when the quantity of intake air is compensated by supercharge and the effective compression ratio is maintained at its initial level through the reduction of the clearance volume. In this case, heat efficiency increased by $5.0\%$ at the same expansion-compression ratio when the apparent compression ratio was 20 and the fuel cut off ratio was 2. As explained above, when the atkinson cycle was used for diesel cycle, heat efficiency was improved. In order to realize high expansion through retarding the intake value closing time, the engine needs to be equipped with variable valve timing equipment, variable compression ratio equipment and supercharged pressure equipment. Then a high expansion diesel cycle engine is realized.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.182-185
• /
• 2008

The thermal performance of air receiver with a change of flow direction for dish solar collector. This system is installed and operated in Incheon, Korea. The thermal capacity of the system is about 5 kW thermal. The aperture diameter of the cylindrical-shape receiver which is made of stainless steel is 100 mm, and the height is 210 mm. Experiments are being carried out to investigate the thermal performance variation of the receivers with several design parameters such as the shape of the receiver, the flow directions and the flow rate of air. First, air flows into the upper part of the receiver, which is the opposite side of the aperture. After the air flows through the inside receiver, that goes out of the receiver through 3 exits which are located near the aperture. Second, air flows into the backside of the receiver, Which is the forward side of the aperture. After the air flows through the inside receiver, that goes out of the receiver through 1 exit. The results show that the system efficiency and receiver efficiency increase as the volume flow rate increases as expected.

• 한국가스학회지
• /
• 제14권3호
• /
• pp.35-40
• /
• 2010

이 연구는 근로자 및 인체에 유해한 휘발성유기화합물질인 benzene, toluene, p-xylene을 흡착제거할 수 있는 흡착제를 개발하고자 하였다. 따라서 그 것을 위하여 기존 상업용 흡착효율을 높이고자 KOH/ACF(activated carbon fibers)를 몰비 1:1로 ACF를 재활성 시켜 기존 ACF와 재 활성 시킨 ACF와의 흡착효율을 비교 검토하고자 하였다. 그 결과 각 물질에 대한 흡착시간에 따른 흡착파과효율(%)는 농도가 클수록 커져 빠른 파과속도를 보였고 또한 농도를 125PPM으로 고정시키고 유량을 0.5$\ell$/min에서 탈착실험을 통한 흡착효과의 재현성은 toluene과 p-xylene의 경우 유사한 경향을 보였다. 그러나 benzene의 경우 재활성한 ACF가 재활성 되지 않은 상업용 ACF보다 오히려 탈착효과가 낮은 것으로 관찰되었다.

• Asian Journal of Atmospheric Environment
• /
• 제11권2호
• /
• pp.131-137
• /
• 2017

A cyclone is an effective tool to facilitate the collection of aerosol particles without using filters, and in cell exposure studies is able to collect a sufficient amount of aerosol particles to evaluate their adverse health effect. In this study, we examined two different methods to improve the aerosol particle collection efficiency of a cyclone. The individual and combined effects of reducing the surface roughness of the inner wall of the cyclone and of using a circular cone attachment were tested. The collection efficiency of particles of diameter $0.2{\mu}m$ was improved by approximately 10% when using a cyclone with a smoothened inner wall (average roughness $Ra=0.08{\mu}m$) compared with the original cyclone ($Ra=5.1{\mu}m$). A circular cone attachment placed between the bottom section of the cyclone and the top section of a collection bottle, resulted in improved collection of smaller particles without the attachment. The 50% cutoff diameter of the modified cyclone (combined use of smoothened inner wall and attachment) was $0.23{\mu}m$ compared to $0.28{\mu}m$ in the original model. The combined use of these two techniques resulted in improved collection efficiency of aerosol particles.

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.946-953
• /
• 2012

When water shortage has been getting worse recently, toilet water-saving is one of the most effective way to solve the water shortage. Therefore, in this study, toilet flushing performance was investigated with VOF(Volume Of Fluid) model to obtain the basic design data for the development of high-efficiency toilets. The result showed that the shorter trapway, the longer the flushing duration time. However, the shorter trapway is found to have disadvantage in exhausting dirt due to relatively weak siphon and higher curvature. Since the remaining water in a trapway appears to help siphon, it is also an important factor in developing high-efficiency toilets. Although higher water level in the water tank shows better performance in flushing, lower water level is preferred to save water. Too low water level may cause dirt to clog the trapway due to relatively weak siphon.

• 상하수도학회지
• /
• 제17권4호
• /
• pp.567-573
• /
• 2003

The pretreatment process was carried out to solubilize the sewage sludge for enhancing its biodegradability using alkaline treatment, ultrasonic treatment(15kHz), ozone treatment and different combination of these three methods: alkaline followed by ultrasonic as well as ozone, and ultrasonic followed by alkaline. The solubilization efficiency was evaluated based on the SCOD/TCOD ratio and VSS/TS ratio. In results, the proper condition of alkaline treatment was shown as 30meq/l of NaOH, pH 12 and 3hours of reaction time. Solubilization efficiency increased to 17% from initial 2% based on SCOD/TCOD ratio under this condition. In ultrasonic treatment, the higher ultrasonic power, the longer treatment time and the lower sludge volume resulted in higher solubilization respectively. There was a rapid increase in solubilization efficiency after 20 minute, then it was measured as 32% of SCOD/TCOD ratio in 1 hour at a ultrasonic power of 1,300W with 1/sludge. Solubilization efficiencies in combined treatment using alkaline and ultrasonic were 47-53% higher than single treatment at a sonicated time of 1 hour. Ozone treatment followed by alkaline treatment also represented the enhanced solubilization compared to ozone treatment. Therefore, ultrasonic or ozone treatment assisted by alkaline could achieve the short treatment time as well as high solubilizetion efficiency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.445-446
• /
• 2008

In this paper, we investigated the diffraction grating efficiency on Ag-doped amorphous chalcogenide Ag/AsSeS thin film for used to volume hologram. The film thickness was 2 um and diffraction efficiency was obtained from He-Ne (632.8nm) and DPSS(532nm) (P:P) polarized laser beam on Ag/AsSeS thin films. As a result, for the films, the maximum grating diffraction efficiency using He-Ne laser(632nm) is 0.15%[2000sec]. And then The recording speed of DPSS laser was about 40s which of batter than He-Ne lasers.