• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.149-157
• /
• 2000

Tool wear in the shearing process such as blanking, piercing and trimming is very important, because it has great effects on the dimensional accuracy, working efficiency and economy. Most of tools in the shearing process have the coated layer at surface fur good wear and corrosion resistance. When the surface of tool is teated, the wear Phenomena of coated surface layer and inner layer may be different. This paper describes a computer modelling technique by the finite element method in order to investigate the wear mechanism and to predict the wear profile of Ti-N coated tool in piercing process according to the volume of Production. Wear coefficients of the coated layer and inner layer are obtained through Pin-on-Disk wear test, respectively. To verify the effectiveness of the suggested technique, the technique is applied to wear analysis in piercing recess of piston pin and simulation results are compared with experimental ones.

• Transactions of Materials Processing
• /
• v.6 no.5
• /
• pp.400-407
• /
• 1997

Geometric mapping technique has been used to find the shape of initial blank for sheet forming. The method was chosen because of its simplicity and numerical efficiency. Error in blank shape were measured along deformation path by FE analysis of forming. Blank shape was modified by volume additionaddition/Subtractiontraction method with taking with taking into account of deformation path. Modified blank shape shows an acceptable result, showing the current method can be an useful tool for predicting blank shape in the practical application. More test will be done to verify the validity of the method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.241-244
• /
• 2008

Recently, The high Air-Tightness and high heat insulation for building construction cause a ventilation air volume deficiency. Also, Worldwide high energy price is strongly urging to economize the air conditioning energy. Therefore Heat Recovery Ventilation is used for the satisfaction of ventilation air volume and building energy saving. Accordingly, this study dose the heat exchanger performance evaluation and economic efficiency evaluation of Heat Recovery Ventilation. And, we wish to make a basic study about HRV System application of HVAC System and Multi System Air-conditioning.

• Culinary science and hospitality research
• /
• v.2
• /
• pp.25-46
• /
• 1996

The clients of hotel desire to be recognized as special persons who have their own personality and self-consciousness. The other hand, The hotel concentrates upon marketing strategy which acts a part of expanding sales. Namely, They find out the need of client, satisfy the desired need, ensure and manage the existing regular customers and make new clients regular customers. So they gain an advantage over competitive hotels. They make strategics of Telemarketing technique which is one of the developed-marketing techniques, can provide distinctive and familiar service and have an hight effect at the low cost. The attractions of Telemarketing strategy can be explained as follows. 1. It is the medium that have cost efficiency. 2. It possesses attractions to do time management. 3. It has control cash flow. 4. It can improve cash flow. 5. Market expansion can be accomplished. 6. It is a medium fit for prospecting over long-term period. 7. It can improve customer relations. 8. It fits seasonality (seasonal sales) 9. It brings greater order volume. 10. It benefits from lower personnel costs. 11. High volume productivity is realized. 12. It has attraction of versatility. 13. It has ease of start-up.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.7
• /
• pp.837-844
• /
• 2003

The exhaust gas flow in the inlet collector of close coupled catalyst(CCC) adapted to the exhaust manifold is very complex flow because the exhaust gas is a pulsation flow with several port flow. The distribution of gas flow and temperature in inlet collector effect to the efficiency of catalytic converter. In this study, it measures temperatures on several point in inlet collector with two kind of inlet collector volume. And it analyzes with CFD to exhaust manifold and close coupled catalyst for temperature and flow. Comparing to measured and analyzed result, it find increasing of collector volume effects to catalyst temperature distribution and uniformity of catalytic converter

• Asian Journal of Business Environment
• /
• v.5 no.2
• /
• pp.31-36
• /
• 2015

Purpose - This work aims to study the existing management process and methods of statistical evaluation of personnel mobility management, and propose improvement measures. This is particularly relevant in today's market economy because proper organization of personnel movement affects the availability and effective utilization of human resources in enterprises. Hence, it influences the volume, timely execution of work, equipment efficiency, and consequently the volume of production, its cost, profit, and other economic indicators. Research design, data, and methodology - We investigate the indicators that measure staff mobility, and their dependent consequences. Further, it analyses the factors influencing high staff turnover, which is a main indicator of staff mobility. Results - Measures for staff mobility development and prevention of turnover are proposed. Micom Systems is a sample case that has developed special programs to reduce staff turnover. Conclusions - Staff mobility leads to additional costs, significant loss of working time, and increase in defects. However, the advantages of staff mobility outweigh these negative factors. The role of staff mobility in a market economy cannot be overestimated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.121.1-121.1
• /
• 2014

Recently, much attention has been given to plasma production under liquid and its applications [1]. However, most of plasma production techniques reported so far utilize high voltage dc, ac, rf or microwave power [2], where damage to discharge electrodes and small discharge volume are remained issues. As an alternative of plasma production method under liquid, we have proposed pulsed microwave excited plasma using slot antenna, where damage to the slot electrode can be minimized and plasma volume can be increased. We have also reported improvement of treatment efficiency with use of reduced-pressure condition during the discharge [3]. To realize low pressure conditions in liquid, various alternative technique can be considered. One possible technique is simultaneous injection of microwave power and ultrasonic wave. Ultrasonic wave induces pressure fluctuation with the wave propagation and is so far used for cavitation production in the water. We propose utilization of reduced pressure induced by ultrasonic cavitation for improvement of the plasma production. Correlation between the plasma production and the ultrasonic power will be discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.1
• /
• pp.155-164
• /
• 1996

Dual-fuel engines are being researched with emphasis on the possible types of natural gas supply systems. Hence, a three-dimensional combustion model by using finite volume method was developed to provide a fundamental understanding of the auto-ignition of pilot distillate and subsequent burning of natural gas, when the natural gas as well as the distillate was directly injected into a quiescent diesel engine like combustion bomb tests and the numerical results were investigated for the mixed combustion phenomena. With high-pressure natural gas injection, it was found that the gaseous fuel injection characteristics had to be well harmonised with that of the pilot distillate. For better combustion efficiency, however, further researches are required for the optimisation of injection system in the existence of air motion.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.207-216
• /
• 1997

We developed the durability estimation and design systems to minimize the volume, considering the durability, efficiency, and design requirements of worm gears. That is, we consider each kind of factors affecting on durability on the basis of AGMA Standard for the cylindrical and double-enveloping worm gears. We also estimate input power on the basis of wear and durability, bending strength and deflection of worm shaft, and we developed the durability estimation and design systems of power transmission worm gears introducing the optimal design method on the personal computer to be easily used in field. Also, we developed a method which converts the design variables obtained from the optimal design method to integer values(number of worm threads, number of worm threads, number of worm wheel teeth, etc.,) to be used in real design and production. The developed durability estimation and design method can be easily applied to the design of worm gears used as power transmission devices in machineries and is expected to be used for weight minimization of worm gear unit.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.5
• /
• pp.30-40
• /
• 1994

The direct-injection stratified-charge engine has the advantages of higher thermal efficiency and less CO and $NO_x$ emission levels than conventional spark ignition engines. However, its actual utilization is prevented by high unburned hydrocarbon emission levels during light-load operations. In this paper, fundamental studies were carried out using a pancake type constant volume bomb. The effects of intensification of local premixing by tangential and radial fuel injection were examined experimentally. Unburned hydrocarbon emission levels with radial fuel injection were shown to be lower than those of tangential fuel injection cases. The stratification and mixing process of fuel jet and combustion process were observed by schlieren photography.