• 한국환경과학회지
• /
• 제20권11호
• /
• pp.1465-1481
• /
• 2011

The accuracy of ozone sensitivity coefficients estimated with HDDM (High-order Decoupled Direct Method) can vary depending on the $NO_x$ (Nitrogen Oxides) and VOC (Volatile Organic Compound) conditions. In order to evaluate the applicability of HDDM over the Seoul Metropolitan Area (SMA) during a high ozone episode in 2007 June, we compare BFM (Brute Force Method) and HDDM in terms of the $1^{st}$-order ozone sensitivity coefficient to explain ozone change in response to changes in NOx and VOC emissions, and the $2^{nd}$-order ozone sensitivity coefficient to represent nonlinear response of ozone to the emission changes. BFM and HDDM estimate comparable ozone sensitivity coefficients, exhibiting similar spatial and temporal variations over the SMAduring the episode. NME (Normalized Mean Error) between BFM and HDDM for the episode average $1^{st}$- and $2^{nd}$-order ozone sensitivity coefficients to NOx and VOC emissions are less than 3% and 9%, respectively. For the daily comparison, NME for the $1^{st}$- and $2^{nd}$-order ozone sensitivity coefficients are less than 4% ($R^2$ > 0.96) and 15% ($R^2$ > 0.90), respectively. Under the emission conditions used in this study, two methods show negative episode average $1^{st}$-order ozone sensitivity coefficient to $NO_x$ emissions over the core SMA. The $2^{nd}$-order ozone sensitivity coefficient to $NO_x$ emissions leads ozone to respond muchnonlinear to the reduction in $NO_x$ emissions over Seoul. Nonlinear ozone response to reduction in VOC emissions is mitigated due to the $2^{nd}$-order ozone sensitivity coefficient which is much smaller than the $1^{st}$-order ozone sensitivity coefficient to the emissions in the magnitude.

• Food Science and Biotechnology
• /
• 제17권3호
• /
• pp.447-456
• /
• 2008

Limonene, pinene, and isoprene are abundant and ubiquitous volatile organic compounds (VOCs) which are found in various natural products and also produced from various manufacture processes. Limonene and pinene are major components of food additives and household products for enrichment of good flavors and elimination of malodors, and isoprene is a basal motif of monoterpenes such as limonene and pinene. They have shown many beneficial effects such as chemopreventive, chemotherapeutic, and antioxidant activities. Upon certain conditions, however, adverse effects of these compounds on human health have also been reported. Although they do not seem to have acute and severe toxicity to human, they can easily generate secondary organic aerosols (SOAs) when they react with oxygen and/or ozone, which have shown certain toxic effects on experimental animal models as well as on humans. Numerous household and scented products containing limonene, pinene, and isoprene are widely used in these days. However, biological consequences upon exposure to these products are largely unknown. The aim of this review is to summarize and analyze the current understanding on the biological effects of VOCs, in particular limonene, pinene, and isoprene, as well as their SOAs.

• 대한의용생체공학회:의공학회지
• /
• 제25권5호
• /
• pp.329-334
• /
• 2004

전자후각(I-nose)시스템은, 전통적으로 음식물이나 플라스틱 제재의 생산에서 자동화된 품질관리 시스템에 사용되어 왔으나, 최근 호흡가스 등을 통해 당뇨, 호흡 및 소화기 질환과 감염 등을 검사하는 진단영역으로 그 응용분야를 확대하고 있다 이러한 질병과 연관이 없는 휘발성 유기화합물(volatile organic compound, YOC) 에 대하여 I-nose 의 센서어래이는 센서 물질과 휘발성 화합물 사이의 반응으로 인해 고유한 반응을 보이며, 신호의 profile 에 그 흔적을 남긴다. 본 연구에서는 센서어래이의 반응 신호를 profile 형태로 유지 및 분석함으로써 I-nose 의 가스시료 인식 성능을 보다 향상시킬 수 있는 방법을 제안하였다. 신호의 profile 에는 패턴인식을 위한 기존의 개별적인 특성(feature) 보다 많은 정보가 들어 있으며, 이를 가스의 구분에 효과적으로 이용하기 위해 디지털 영상처리에서 사용되는 패턴 매칭을 응용한time-profile방법을 새롭게 제안하였다. 제안된 방법의 검증을 위해, 반도체 공정에 의해 제작된 16채널의 초소형 가스센서 어래이를 사용해 측정된 8종류의 각기 다른 가스시료들에 대하여, 동종 및 이종 가스간의 매칭의 정도를 산출하였다. 기존의 방법과 비교한 결과 동종과 이종 가스간의 뚜렷한 구별이 가능하여 이를 패턴인식에 사용하면 E-nose의 가스 인식 성능을 향상시킬 것으로 전망된다.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2333-2336
• /
• 2010

$TiO_2$ thin films were synthesized on carbon fibers using chemical vapor deposition. We show that these films can exhibit extraordinarily high absorption capacities of toluene vapor. Such an absorption phenomenon of toluene at room temperature was not found for other $TiO_2$ samples. Upon toluene absorption change in the color (darkening) of the film was found, indicating that these films can be used as an indicator of the existence of volatile organic compounds in the indoor environments. By X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM), a high concentration of OH species and a unique layered structure were found for the $TiO_2$ films and these could be related to their high absorption capacity of toluene.

• 한국환경과학회지
• /
• 제7권5호
• /
• pp.573-580
• /
• 1998

This study examined the carbon dioxide ($CO_2$) pollution inside vehicles under low ventilation condition and evaluated the Air Quality System (AQS) for in-vehicle air quality using two techniques. The low ventilation condition is not recommended in order to keep oxygen-rich condition inside vehicles. Under the low ventilation condition, the in-vehicle $CO_2$ concentrations exceeded 1,000 ppm, the air qualify guidelines in the United States, Western Europe, and Japan, indicating more oxygen deficiency inside vehicles. On the contrary, with the AQS-on condition, the in-vehicle $CO_2$ concentrations were less than 1,000 ppm fer most of the driving time, indicating that the AQS could solve the problem of $CO_2$ accumulation inside vehicles under the low ventilation condition. The AQS test conducted by comparing carbon monoxide (CO) and volatile organic compound (VOC) concentrations inside two vehicles indicated that the AQS effectively decreased the in-vehicle concentrations by 21 to 36%, as compared to medium ventilation condition with the windows closed, the vent opened, and air conditioning on. In addition, The AQS test conducted by comparing the interior and exterior concentrations indicated that the AQS effectively decreased the in-vehicle concentrations by 18 to 31%, as compared to medium ventilation condition.

• 분석과학
• /
• 제23권5호
• /
• pp.465-476
• /
• 2010

본 연구에서는 대기환경시료 및 현장조건에서 채취한 현장시료들 중, 악취성분 및 주요 VOC 성분들 중에서 여러 유형의 관리대상으로 지정 중인 benzene, toluene, p-xylene, styrene, methyl ethyl ketone의 농도분석 방식들을 비교하였다. 이때, GC/FID와 튜브를 연계한 F-T 분석방식과 GC/MS와 백(bag)을 연계한 M-B방식으로 같은 시료를 각각 분석하고 이들 결과 값을 비교하였다. 상관분석결과, toluene과 pxylene에서 F-T와 M-B방법간의 결과에서 큰 상관성을 보이는 것으로 나타났다(P < 1.4E-08). 양 기기간의 오차를 percent difference (PD)와 같이 산술적으로 구하여 평가한 결과, benzene과 toluene의 농도는 상대적으로 비슷한 경향을 보였다. 그러나 분석대상 성분들 간에 양 방식의 차이는 평균적으로 35%가 넘으면서 F-T와 M-B간의 오차가 일정 수준이상으로 존재하였다. 그리고 F-T/M-B ratio가 대부분 1 이하로 나타나면서, M-B의 결과 값이 F-T에 비해 상대적으로 크게 나타나는 경향을 보였다. 양 분석기기로부터 산출한 결과 값을 통계적으로 판단하기 위해, t-test를 실시하였다. 그 결과, 95% 신뢰수준에서 toluene, pxylene, styrene, methyl ethyl ketone 성분에서는 두 시스템간의 결과 값에 차이가 유의한 것으로 나타났다(P < 0.043). 그러나 전반적으로 양 분석기법의 차이에 따른 오차는 상당 부분 선택한 표준시료의 성상 및 백내부의 시료손실 등과 같은 요인에 크게 영향을 받는 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권6호
• /
• pp.65-72
• /
• 2007

VOC Analyzer는 공기 중에 포함되어 있는 VOC (휘발성 유기화합물) 중 toluene, ethyl benzene, xylene, styrene 등 4가지 방향족 탄화수소 가스 농도를 측정하는 측정 장비이다. 검출기에는 고감도 반도체 가스센서를 사용한 가스크로마토그래피방식으로써 캐리어 가스로서는 봄베공기를 사용한다. 또한, 대기 중에 포함되어 있는 다양한 가스성분을 농축하지 않고 VOC를 분리 검출하여 농도를 편리하면서도 자세하게 측정할 수 있으므로 건축자재, 페이트, 도료, 접착제 등에서 응용될 수 있다. 이러한 장점을 가진 VOC Analyzer를 이용하여 목재에 주로 사용되는 도료로부터 VOC 방사거동을 확인하였다. 실험은 시편을 밀봉하여 실험개시 후 일정시간 간격으로 48시간까지 측정하였다. 수용성 페인트와 enamel 페인트의 VOC 방산량은 lacquer와 urethane vanish에 비해 상대적으로 적었으며 4개의 샘플 중에서 lacquer의 VOC 방산량이 가장 높게 나타났다. VOC Analyzer를 이용한 측정법은 현재 사용되고 있는 VOC 측정방법 중 가장 빠르고 경제적인 기술이기 때문에 앞으로 널리 사용된 것이라 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권5호
• /
• pp.58-66
• /
• 2007

The objective of this research was to develop environment-friendly adhesives for face fancy veneer bonding of engineered flooring. Urea-formaldehyde (UF)-tannin and melamine-formaldehyde (MF)/PVAc hybrid resin were used to replace UF resin in the formaldehyde-based resin system in order to reduce formaldehyde and volatile organic compound (VOC) emissions from the adhesives used between plywoods and fancy veneers. Wattle tannin powder (5 wt%) was added to UF resin and PVAc (30 wt%) to MF resin. These adhesive systems showed better bonding than commercial UF resin with a similar level of wood penetration. The initial adhesion strength was sufficient to be maintained within the optimum initial tack range. The standard formaldehyde emission test (desiccator method) and VOC analyzer were used to determine the formaldehyde and VOC emissions from engineered flooring bonded with commercial UF resin, UF-tannin and MF/PVAc hybrid resin. By desiccator method, the formaldehyde emission level of UF resin showed the highest but was reduced by replacing with UF-tannin and MF/PVAc hybrid resin. MF/PVAc hybrid satisfied the $E_1$ grade (below $1.5mg/{\ell}$). VOC emission results by VOC analyzer were similar with the formaldehyde emission results. TVOC emission was in the following order: UF > UF-tannin > MF/PVAc hybrid resin.

• 한국대기환경학회지
• /
• 제27권6호
• /
• pp.772-790
• /
• 2011

In this paper, we use the HDDM (High-order Decoupled Direct Method)-driven ozone sensitivity to predict change in ozone concentrations in response to domain-wide $NO_x$(Oxides of Nitrogen) and VOC (Volatile Organic Compound) emission controls over the Seoul Metropolitan Area during June 11~19, 2007. In order to validate the applicability of HDDM to $NO_x$ and VOC control scenarios, the HDDM results are compared to Brute Force Method (BFM). For VOC controls, NME (Normalized Mean Error) between BFM and HDDM remains less than 2% until the domain-wide VOC emissions are reduced by 80%. The NME for a 40% reduction in the domain-wide $NO_x$ emissions is less than 5% but increases abruptly after further reductions in the $NO_x$ emissions (i.e., 80% reduction). The results indicates that it may be inaccurate to use ozone sensitivity coefficients estimated at a given base emission condition in predicting ozone after $NO_x$ reductions larger than ~50% of the domain total in the SMA. Therefore, HDDM application on piecewise emissions is desirable to predict ozone response to emission controls with accuracy (i.e., truck emissions rather than the domain total). For computational efficiency, HDDM shows approximately 30% faster than the BFM sensitivity approach.

• 한국대기환경학회지
• /
• 제22권6호
• /
• pp.767-778
• /
• 2006

This study was carried out to evaluate the temporal variations of VOCs at an urban site, and to compare the concentrations of VOCs at an urban site in Daegu with those at a suburban site in Gyeongsan. Three hourly VOC samples in the ambient air were collected using a sequential tube sampler (STS 25, Perkin Elmer) throughout two weeks during May and July representing spring and summer seasons, respectively. The VOC concentrations were determined by an automatic thermal desorption apparatus with GC/MS analysis. A total of 12 VOCs of environmental concern were determined, which are chloroform, benzene, trichloroethylene, toluene, tetra-chloroethylene, ethylbenzene, m+p-xylenes, o-xylene, styrene, 1,3,5- and 1,2,4-trimethylbenzenes. Among 12 target VOCs, the most abundant compound appeared to be toluene, being followed by xylenes. The mean concentrations at the urbn site were 1.2 pub for benzene and 20.4 ppb for toluene (n=221) while the mean levels at the suburban site were 0.9 ppb and 4.3 ppb for benzene and toluene (n=96), respectively. The urban site concentrations were typically several-fold higher than those measured at the suburban site. It was found that general trends of VOC levels were significantly dependent on traffic conditions at the sampling site since VOC concentrations were at their maximum during rush hours, i.e. $9{\sim}12a.m$ and $6{\sim}9p.m$. Statistical investigations were conducted to investigate any significant relationships between VOC concentrations and affecting factors. Calculated correlation coefficients among VOCs were positively significant at a level of 0.05 in most cases. Increased concentrations of toluene in the urban site were estimated to reflect the effect of large industrial sources, mainly from textile industry.