• The Korean Journal of Ecology
• /
• v.28 no.3
• /
• pp.135-139
• /
• 2005

This study was carried out to find the allelopathic effect of volatile materials released from Eupatorium rugosum. The GC method was employed for analysis of volatile materials from E. rugosum and 49 chemical substances were identified such as $\beta$-caryophyllene, $\alpha$-terpinenol, chamazulene, bornyl acetate, $\alpha$-pinene, etc. including unidentified three chemicals. Germination test in Phaseolus radiatus was done to find the inhibition effect of volatile materials using some chemicals which were proved to be important component or much amounts ones in E. rugosum. It was strongly inhibited by linalool and terpinen-4-ol. Seedling elongation and radicle growth of that were proportionally inhibited by the concentration of the essential oil, especially $\alpha$-pinene and bornyl acetate. Biomass of receptor plant was slightly decreased more than 58 ${\mu}l$ of the extract in case of $\alpha$-pinene, while it was decreased more than 19 ${\mu}l$ of that in bornyl acetate but it was shown non-significant. From the above results, it was found that volatile materials from E. rugosum showed a allelopathic effect and also $\alpha$-pinene, bornyl acetate, linalool and terpinen-4-ol used in bioassay were some of major allelochemicals in germination inhibition and especially linalool and terpinen-4-ol are prominent effect on growth inhibition of other plant.

• Elastomers and Composites
• /
• v.35 no.2
• /
• pp.89-97
• /
• 2000

Waterborne epoxy resins have been developed in order to meet environmental regulations for reduction of the emission of organic solvents from coating industry As each generation has filled a performance gap in the previous technology, new waterborne epoxy resin has developed. Initially, waterborne epoxy resins were used primarily on masonry, but the subsequent generations have found utility for the protection of metallic substrates as well. Indeed, the third generation systems have been formulated to produce the high performance industrial maintenance primers which possess the desirable combination of good corrosion resistance and low volatile organic compound levels. This paper outlines the important guidelines for formulating waterborne epoxy primers from waterborne epoxy resin that has recently developed in our company. The importance of using the appropriate resin-curing agent system at the optimized epoxy to amine ratio is stressed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.4
• /
• pp.385-394
• /
• 2023

Objectives: Firefighters could be exposed to a range of toxic chemicals during firefighting. When tyre burns, various toxic chemicals including volatile organic compounds(VOCs) could be emitted. In this study, the researchers assessed the VOC exposure of firefighters during tyre fire suppression through biomonitoring. Methods: There was a big tyre fire on 12 March 2023. Of the responding firefighters, we recruited 14 participants to collect their urine after firefighting. One week later, researchers collected firefighters' urine again right after their off-duty period. We analyzed each metabolite of benzene, toluene, xylene, and styrene in urine and compared their exposure level based on sampling time. Results: The detection rate for metabolite of benzene, toluene, styrene, and xylene in urine sampled at each time was 43%-64%, 100%, 86%-100%, and 100%, respectively. Except for the benzene, metabolite levels measured in urine after firefighting were similar to that from off-duty period. However, the median concentration of benzene metabolite in urine sampled after firefighting was three times higher compared to that from off-duty period(34.2 ㎍/g crea. and 10.9 ㎍/g crea., respectively.) The estimated airborne concentration of benzene calculated from metabolite level in urine was 0.16 ppm, which exceeded the recommended exposure level set by the National Institute for Occupational Safety and Health. Conclusions: This study shows that firefighters could be exposed to the high level of VOCs including benzene during their firefighting especially at tyre fire. These results could be used as a valuable data to prove firefighters' exposure to hazardous chemicals during their duty.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48
• /
• pp.41-48
• /
• 2003

The number of natural products obtained from plants has now reached over 100,000 and new chemical compounds are being discovered ever year. Medicinal and Aromatic plants and their extracts have been used for centuries to relieve pain, aid healing, kill bacteria and insects are important as the antifungal and anti-herbivore agents with further compounds being involved in the symbiotic associations. Although their functions in plants have not been fully established, it is Known that some substances have growth regulatory properties while others are involved in pollination and seed dispersal. The complex nature of these chemicals are usually produced in various types of secretory structures which is an important character of a plant family and also influenced and controlled by genetic and ecological factors. Detailed anatomical description of these structures ave relevant to the market value of the plants, the verification of authenticity of a given species and for the detection of substitution or adulteration. Volatile oils are used for their therapeutic action for flavoring of lemon, in perfumery of rose or as starting materials for the synthesis of other compounds of turpentine. For therapeutic purposes they are administered as inhalations of eucalyptus oil, peppermint oil, as gargles and mouthwashes of thymol and transdermally many essential oils including those of lavender, etc. With these current trend for using volatile components in essential oil will be increasing in the future in Korea and in the world as well.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.182-193
• /
• 2022

Purpose: By measuring and evaluating the risk of biodiesel through non-volatile residue (NVR) and flash point and explosion limit measurement at a specific temperature according to ASTM test standards, the risk of chemical fire causative substances is identified and a universal evaluation method By derivation and securing the risk-related data of the material, it can be used for the identification and analysis of the cause of the fire, and it can be applied to the risk assessment of other chemical substances Method: In order to measure the risk of biodiesel, it was measured using the non-volatile residue(NVR) measurement method, which measures how much flammable liquid is generated at a specific temperature. Heating was tested by applying KS M 5000: 2009 Test Method 4111. In addition, the flash point was measured using the method specified in ASTM E659-782005, and the energy supply method was measured using the constant temperature method. In addition, the explosion limit measurement was conducted in accordance with ASTM E 681-04 「Standard test method for concentration limits of flammability of chemicals(Vapors and gases)」 test standard. Result: As a result of checking the amount of combustible liquid by the non-volatile residue (NVR)measurement method, the non-volatile residue(NVR) of general diesel when left at 105±2℃ for 3 hours was about 30% (70% of volatile matter) and about 4% of biodiesel. In addition, similar results were obtained for the non-volatile residue(NVR)heating temperature of 150±2℃, 3 hours and 200±2℃ for 1 hour, and white smoke was generated at 200℃ or higher. In addition, similar values were obtained as a result of experimentally checking the explosion (combustion) limits of general diesel, general diesel containing 20% biodiesel, and 100% biodiesel. Therefore, it was confirmed that the flammability risk did not significantly affect the explosion risk. Conclusion: The results of this study suggested the risk judgment criteria for mixtures through experimental research on flammable mixtures for the purpose of securing the effectiveness, reliability, and reproducibility of the details of the criteria for determining dangerous substances in the existing Dangerous Materials Safety Management Act. It will be possible to provide reference data for the judgment criteria for flammable liquids that are regulated in the field. In addition, if the know-how for each test method is accumulated through this study, it is expected that it will be used as basic data in the research on risk assessment of dangerous substances and as a basis for research on the determination of dangerous substances.

• Analytical Science and Technology
• /
• v.26 no.6
• /
• pp.381-386
• /
• 2013

The sixty nine chemicals that are closely linked to chemical accident are designated as the substances requiring preparation for accidents and managed for public health under the Toxic Chemicals Control Act. In this study, storage stability of allyl chloride (AC) and carbon disulfide (CD), which are highly inflammable and volatile in tedlar bags, was studied for gaseous chemicals sampling. Storage stability was studied considering storage temperature ($2^{\circ}C$, $25^{\circ}C$), chemical concentration (low conc. ppm, high conc. ppm) and storage time (0, 48, 96, and 144 hr). Also, the stability of bags containing one type of chemical substance and the bags containing a mixture of chemicals was compared against each other. As a result, two chemicals showed decreasing storage stability based on storage time. Also two chemicals presented statistical significance of concentration and mixing type.

• Environmental Analysis Health and Toxicology
• /
• v.10 no.1_2
• /
• pp.37-46
• /
• 1995

The purpose of this research is to estimate a safe environmental level of human exposure to thresholding-acting toxicants in drinking water and recommend the acceptable levels and management plans for maintaining good quality of drinking water' and protecting health hazard. This research has been funded as a national project for three years from 1992 to 1995. This study(the second year, 1993-1994) was conducted to monitor 39 species of noncarcinogenic chemicals such as volatile organic compounds(VOCs), polynuclear aromatic hydrocarbens(PAHs), pesticides and heavy metals of drinking water at some area in six cities of Korea, and evaluate health risk due to these chemicals through four main steps (hazard identification, exposure assessment, dose-response assessment and risk characterization) of risk assessment in drinking water. In hazard identification, 39 species of non-carcinogenic chemicals were identified by the US EPA classification system. In the step of exposure assessment, sampling of tap water from the public water supply system had been conducted from 1993 to 1994, and 39 chemicals were analyzed. Inclose-response assessment for non-carcinogens, reference doses(RfD) and lifetime health advisories(HAs) of lifetime acceptable levels were calculated. In risk characterization of detected chemicals, the hazard quotients of noncarcinogens were less than one except those of manganese and iron in D city.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.5
• /
• pp.304-313
• /
• 2010

During recent years, various studies have demonstrated that indoor chemical pollution causes health problem and also negatively affect the performance of work by occupants. Building materials have been concerned as indoor chemical sources. Some of guidelines and certification system has been developed and resulted as dramatic decrease of harmful indoor chemicals such as formaldehyde and volatile organic compounds. Also, Home furniture and electrical devices has been concerned as one the primary influence the indoor chemical concentration in residential spaces. It is found that various kinds of electric home appliances have a significant source of chemical emission in indoor environments. In this study, the methodologies of detecting harmful chemicals from various kinds of products has been developed with large chamber measurement system and suggest some of the evaluation method for the chemicals from the home appliances as TV sets.

• Journal of Korean Society of Water and Wastewater
• /
• v.7 no.2
• /
• pp.9-23
• /
• 1993

Emission of hazardous and volatile organic chemicals from solid waste landfill site was become to important issue because of environmental pollution and health risk by such chemicals. Laboratory batch and continuous experiments were conducted respectively to elucidate isothermal sorption behaviors and transport phenomena(by gas through unsaturated solid waste layer) in wet solid waste-gas system. Source separated and size reduced refuse(bulky waste) and incinerated ash were used after controlling water content, and trichloroethylene(TCE) was chosen among many such chemicals because of it's generality among those man-created pollutants. Isothermal TCE sorption equilibria wet solid waste-gas system can be described in linear equation and partition coefficient in this system can be estimated approximately by the simple equation derived from schematic structure of the system. Transport equation modified by instantaneous equilibrium sorption fraction and kinetic sorption rate(overall mass transfer capacity coefficient) simulated well the column experiment results.

• Transactions of Materials Processing
• /
• v.13 no.3
• /
• pp.262-267
• /
• 2004

Ultrasonic machining has been known as one of the conventional machining methods in the glass fabrication processes. In ultrasonic machining, typically, glass is removed by the impulse energy of the abrasive generated by the ultrasonic power. However, when the machining feature decrease under hundreds of micrometers, as conventional ultrasonic machining uses only the impulse energy of the abrasive, the speed of ultrasonic machining decreases significantly and the surface roughness becomes deteriorated. To overcome this size effect, the chemicals which can erode glasses, such as HF, XF, etc, are added to the slurry. The chemical-assisted ultrasonic machining method, so called, is another alternating effective way for micro machining of glasses. In previous work, we used the hydrofluoric acid (HF) as an additive chemical. But, as the HF solution is too poisonous to be used as a ultrasonic process additive, it is needed to be substituted by other safe chemicals. As results of the machinability comparison of several chemicals, the GST-500F was selected to replace the HF. The GST-500F (pH $4.0{\pm}1.0$) is non-volatile, odorless. During experimental works, it was shown that the machining rate increases 1.5 times faster than the conventional ultrasonic machining. The machining load also decreases. However, the enlargement of the hole diameter and significant tool wear are still the problems to be solved.