• Journal of Preventive Medicine and Public Health
• /
• v.47 no.3
• /
• pp.169-176
• /
• 2014

Objectives: This study aimed to evaluate occupational symptoms and chemical exposures of nail salon technicians. Methods: Work-related symptoms of nail salon technicians in Daegu City were surveyed using a researcher-administered questionnaire, and responses were compared to those of non-exposed office workers as controls. Personal exposure level of airborne volatile organic compounds was also monitored using passive samplers. Results: A total of 159 subjects in 120 salons were interviewed. Average work-shift concentrations of 13 chemicals were measured for 50 workers from 30 salons using personal passive samplers. The most frequently reported respiratory or neurologic symptoms by nail shop technicians compared to controls were nose irritation (odds ratio [OR], 54.0; confidence interval [CI], 21.6 to 134.8), followed by headache (OR, 9.3; CI, 4.7 to 18), and throat irritation (OR, 4.3; CI, 2.2 to 8.5). For eyes and skin, 92% of respondents complained eye irritation (OR, 13.1; CI, 5.7 to 30.1). In musculoskeletal symptoms, workers reported pain or discomfort in shoulders (OR, 20.3; CI, 7.7 to 54) and neck (OR, 19.7; CI, 8.9 to 43.6). From personal measurements, the proportion of exceeding the Korean Occupational Exposure Limit was the highest for acetone with 64%, followed by toluene (50%), butyl acetate (46%), and methyl methacrylate (12%). However, the service was being provided without a proper ventilation system in most surveyed shops. Conclusions: Based on these findings, it is warranted to have appropriate local exhaust ventilation place to ensure adequate health protection of nail shop technicians as well as customers. At the same time, greater policy interests are warranted in nail care business to protect health of both workers and customers.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup3
• /
• pp.125-130
• /
• 2016

Nepeta cataria L. has been used in traditional medicine of some countries. Here the cytotoxic and apoptogenic activity of methanol extracts, n-hexane, dichloromethane, ethyl acetate, n-butanol, and acqueous extracts and the essential oil obtained from the aerial parts of the plant were evaluated with PC3, DU-145 and MCF-7 cell lines. Cell viability, histograms of PI stained fragmented DNA in apoptotic cells and Western blot analysis of proteins involved in the cascade of apoptosis were compared in all samples. Thirty components were identified as volatile, representing 99.7% of essential oil composition after GC-MS analysis of the oil obtained from aerial parts of the N. cataria by hydro-distillation. The major oil components of the essential oil were nepetalactone stereoisomers. Comparing IC50 values showed estrogen receptor positive PC3 cells were more sensitive to the cytotoxic effects of N. cataria in comparison with low hormone-receptor presenting DU-145 cells. Among multiple extracts and essential oils of the plant, only the ethyl acetate extract could significantly decrease cell viability in PC3 cells, in a concentration dependent manner. Ethyl acetate extract of N. cataria treated cells showed a sub-G1 peak in PC3 cells in a concentration dependent manner that indicates the involvement of an apoptotic process in ethyl acetate extract-induced cell death. Western blotting analysis showed that in PC3 cells treated with ethyl acetate (48 h) caspase 3 and PARP were cleaved to active forms. Overall, the results suggest that further analytical elucidation of N. cataria in respect to finding new cytotoxic chemicals with anti-tumor activity is warranted.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.3
• /
• pp.11-18
• /
• 1991

Volatile organic compounds(VOC) present in or generated by many sources, can be toxic, mutagenic or even carcinogenic, so that control of such emissions is significant. The 6 chlorinated organic chemicals as VOC were examined in this study. Prediction of the behavior of VOC on activated carbon beds is an important part of control system design. The objective of this study was to predict gas phase sorption isotherms from physical properties and liquid phase isotherms obtained with the same adsorbent and adsorbate. One of the techniques that was investigated was quantitative structure-activity relationships(QSAR) for the predicition procedures. It was possible to estimate sorption isotherms in the gas phase($a_g$) using either connectivity index, $^2{\chi}$, and the Henry's law coefficient ($H_a$) or the solubility and the equilibrium concentration in the gas phase. As a result of study, the predictive equation based on Freundlich model for $a_g$ was ${\log}\;a_g=0.238\;^2{\chi}+0.573\;{\log}\;H_a+4.330(r^2=0.94)$. Finally, this would provide a potentially useful tool to describe and predict sorption capacity without time-consuming tests.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.05a
• /
• pp.1-46
• /
• 2008

The ability to control filler performance and fines retention is vital in the development of both filled and non filled grades, respectively. This is very important when achieving the desired sheet structure necessary to maximize machine performance and end user demands. A narrow balance exists in attaining the desired retention and formation particularly in systems with heavier ash loads and producing paper and paper board on higher speed high shear equipment. A new generation of both cationic and anionic micropolymer technologies has been developed. These water based chemistries are volatile organic compound (VOC) and alkyphenol ethoxylate (APE) free. When these novel micropolymers are applied with linear poly-acrylamide or in conjunction with inorganic microparticle technologies (such as silica or swellable minerals), substantial increases in drainage, fibre retention and ash retention are observed. These improvements have been observed not only in high filled wood and non wood containing grades such as fine paper and super calendared sheets (SCA), but also in low filled newsprint grades. Of particular note is the drainage improvement seen with the application of the cationic micropolymers in unbleached packaging grades with poly-acrylamide.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.E
• /
• pp.29-38
• /
• 1999

This study identified emission sources and emissions of air pollutants such as volatile organic compounds (VOCs), solvents, and acid gases produced from chemical plants. We collected air samples from various processes, reactors and facilities using VOC detectors and workers' experience. We identified chemical structures and emission concentrations of air pollutants. We analyzed total emissions of air pollutants emitted from the chemical plants. Also, we developed some emission reduction technologies based on chemical types and emission situations of the identified air pollutants. For reduction of air emissions of acid gases, we employed a method improving solubility of pollutants by reducing scrubber operation temperature, increasing surface area for effective contact of gas and liquid, and modifying or changing chemicals used in the acid scrubbers. In order to reduce air emissions of both amines and acid gases, which have had different emission sources each other but treated by one scrubber, we first could separate gas components. And then different control techniques based on components of pollutants were applied to the emission sources. That is, we first applied condensation and then acid scrubbing method using H2SO4 solution for amine treatment. However, we only used an acid scrubbing method using H2O and NaOH solution for acid gas treatment. In order to reduce air emissions of solvents such as dimethylformamide and toluene, we applied condensation and activated carbon adsorption. In order to reduce air emissions of mixture gases containing acid gases and slovents, which could not be separated in the processes, we employed a combination of various air pollution control devices. That is, the mixture gases were passed into the first condenser, the acid scrubber, the second condenser, and the activated carbon adsorption tower in sequence. In addition, for improvement of condensation efficiency of VOCs, we changed the type of the condensers attached in the reactors as a control device modification. Finally, we could successfully reduce air emissions of pollutants produced from various chenmical processes or facilities by use of proper control methods according to the types and specific emission situations of pollutants.

• Journal of Environmental Health Sciences
• /
• v.40 no.5
• /
• pp.397-406
• /
• 2014

Objectives: Perchloroethylene (PCE) is a volatile chemical widely used as a solvent in the dry-cleaning and textile processing industries. It was evaluated as Group 2 "probably carcinogenic to humans" by the Integrated Risk Information System (IRIS) of the United State Environmental Protection Agency (U.S. EPA) in 2012. In order to provide a scientific basis for establishing risk management measures for chemicals on the national priority substances list, aggregate risk assessment was conducted for PCE, included in the top-10 substances. Methods: We conducted the investigation and monitoring of PCE exposure (e.g., exposure scenario, detection levels, and exposure factors, etc.) and assessed its multi-media (e.g., outdoor air, indoor air, and ground water) exposure risk with a deterministic and probabilistic approach. Results: In human risk assessment (HRA), the level of human exposure was higher in the younger age group. The exposure level through inhalation at home was the highest among the exposure routes. Outdoor air or uptake of drinking water represented less than 1% of total contributions to PCE exposure. These findings suggested that the level of risk was negligible since the Hazard Index (HI) induced by HRA was below one among all age groups, with a maximum HI value of 0.17 when reasonable maximum exposure was applied. Conclusion: In conclusion, it was suggested that despite low exposure risk, further studies are needed considering main sources, including occupational exposure.

• Journal of Environmental Health Sciences
• /
• v.19 no.3
• /
• pp.1-16
• /
• 1993

This paper describes an investigation to determine whether the activated sludge (AS) process could be used for the treatment of wastewater at the Union Carbide Coporation (UCC) plant in Seadrift, Texas. This plant presently utilizes a waste stabilization pond (WSP) system for treatment of the wastewater. The treatment system consists of an in-plant primary WSP and two off-plant WSPs (secondary and tertiary WSPs), run in series. The total hydraulic detention time of the WSP system is approximately 150 days. Several laboratory-based treatability studies have been conducted to evaluate the performace of the WSP system and the degradability of specific chemical compounds. From an additional study, it was determined that the WSP system was stressed and occasionally operating near the limit of its treatment capacity. The existing primary WSP plays an important role in the overall treatmemt system, because it not only functions as a pH and organic-strength equalization basin, but also serves as a "preconditioning" basin by fermenting high strength organic wastes to volatile organic acids for subsequent degradation in the escondary WSP. However, in view of pending RCRA legislatin conerning the "proposed organic toxicity characteristics limits" (40 CFR Part261: Federal Register, July, 1988), it is possible that the primary WSP will have to be abandoned in favor of alternative treatment options. Therefore the main purpose of this study was to perform activated sludge treatability evaluations for the development of an alternative to the existing primary WSP treatment ststem. In addition, another purpose was to determine the degradability of bis(2-chloroethyl)ether (Chlorex or CX) and benzene(BZ) in the activated sludge process. The presence of these two chemicals in the wastewater of the plant prompted the question of whatedether they could be degraded in an activated sludge system.

• Membrane Journal
• /
• v.15 no.1
• /
• pp.44-51
• /
• 2005

Polyurethane-polysiloxanes (PU/PDMS) was synthesized using 4,4'-diphenylmethane diisocyanate (MDI) and 1,4-butanediol (BD) to overcome the weakness to the organic chemicals. The composite membranes were prepared onto porous poly(tetrafluoroethylene) (PTFE) supports. In vapor permeation experiments, the flux increased with increasing operating temperatures and feed concentrations while the separation factors showed the opposite trend, so-called 'trade-off'. In this study, the effect of the flux on the operating temperatures was not severe since the content of the soft segments is fairly higher than that of the hard segments. The composite membrane type of PU/PDMS maintained high flux and separation factor as well when comparing with the dense type membranes.

• Food Science of Animal Resources
• /
• v.43 no.3
• /
• pp.471-490
• /
• 2023

In this study, the duck eggs were salted with none or 2.5% and 5.0% (v/v) of liquid smoke (LS), respectively. As a control, samples salted without LS were used. The 2-thiobarbituric acid (TBA) values, 1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging ability, and reducing power of the three groups were tested at 0, 7, 14, and 21 and 28 days to determine the effects of LS on the antioxidant activity of treated eggs. In addition, gas chromatography-mass spectrometry (GC-MS) and electronic nose (E-Nose) were used to analyze the volatile flavor components of fresh duck eggs, LS, control, and salted duck eggs enriched with 2.5% (v/v) LS after 28 days of salting. The TBA value considerably increased with an increase in salting period, and the treated egg's TBA value significantly associated with LS concentration. The TBA value decreased as the LS concentration increased. The amount of LS present was highly associated with their capacity to scavenge DPPH radicals. The reducing power of the samples was substantially correlated with the LS concentration, and the reducing power increased with increasing LS concentration. The GC-MS data revealed that phenols and ketones were the predominant chemicals present in the LS, and they were also found in the eggs added to the LS even though they were absent in the fresh eggs and control. The flavor of the control group and treated eggs with LS differed significantly, according to the principal component analysis and radar map of the E-nose. The texture study results revealed that the LS significantly impacted the hardness, cohesiveness, and chewiness of eggs.

• Journal of Marine Life Science
• /
• v.2 no.2
• /
• pp.49-55
• /
• 2017

Four chemical treatments with hydrogen peroxide (H₂O₂), copper sulfate (CuSO₄), potassium permanganate (KMnO₄) and chlorine (Cl₂) were applied to the effluent pond water of a hybrid striped bass saltwater recirculating aquaculture system to compare their oxidation power. Four chemicals were applied at concentrations of 0 (control), 1, 5, 10 and 20 mg/l. An additional concentration of 40 mg/l was included in the chlorine treatment. Water samples from four hybrid striped bass ponds were tested with KMnO₄ and Cl₂. H₂O₂ did not reduce any of BOD, COD and chlorophyll-a, and copper sulfate was only effective on chlorophyll-a for the effluent pond. Removal efficiencies for chlorophyll-a by copper sulfate were 19.2%, 37.5%, 54.2% and 74.1% dose-dependently. Potassium permanganate effectively removed the BOD, COD and chlorophyll-a. The COD removal rates in four fish ponds varied from 15.9% to 31.6% at the concentration of 10 mg/l. Interestingly, Cl₂ did not reduce the BOD and COD at all, but the BOD and COD instead increased drastically with increasing the Cl₂ concentration. The pond water with the highest initial BOD and COD values among the fish ponds tested increased by 350% in the BOD and 150% in the COD at 20 mg/l. Furthermore, Cl₂ did not significantly reduce any types of solid matter in this study, while KMnO₄ seemed to reduce some extent volatile dissolved solid in the fish pond.