• 대한기계학회논문집A
• /
• 제31권4호
• /
• pp.472-482
• /
• 2007

This study deals with the design and implementation results for a high-capacity vol-oxidizer that can convert Uranium Dioxide pellets to $U_3O_8$ powder for up to several tens of kg HM/batch. We developed two versions of the $1^{st}$ vol-oxidizer and the $2^{nd}$ vol-oxidizer. Through an experiment with the $1^{st}$ vol-oxidizer, we deduced some problems concerning the design considerations such as the recovery rate of $U_3O_8$, the oxidation time of the Uranium Dioxide pellets, the exothermic reaction, and the powder dispersion. From the analyses of the drawbacks of the $1^{st}$ vol-oxidizer, we devised some novel items such as a folding type mesh, vibrators, and mixing blades. Also, we used the Stokes and Density ratio Eq. to determine the most reasonable flux for preventing a powder dispersion. Compared with the results of the $1^{st}$ vol-oxidizer, we showed that both the permeability of the $U_3O_8$ powders and the oxidation rate of the Uranium Dioxide pellets of the $2^{nd}$ vol-oxidizer were remarkably increased, and the temperature of the reactor was controlled well in spite of an exothermic reaction. Also, the powder was not entirely dispersed through the outlet of the voloxidizer. The experimental results of this work can help in the design of a novel and efficient vol-oxidizer with a higher capacity.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.136-140
• /
• 2006

We are developing a vol-oxidizer which transforms the spent $UO_2$ pellets into the $U_3O_8$ power through oxidizing process. The vol-oxidizer consists of furnace, filter, heater and valve etc. When the filter is blocked by the powder, the internal pressure of the furnace is increased owing to the air flow restriction. Then, the furnace vessel is swelled and deformed by it. In this paper, we proposed a procedure of the thermal analysis for furnace vessel design of spent fuel vol-oxidizer. In this work, we determined the thickness of the furnace through analyzing the internal pressure and the thermal stress of the furnace with respect to various pressure and temperature. To analyze the thermal stress, we used ANSYS 8.0 for constructing a FEM model of the furnace, and then analyzed it based on the ASME code. We also surveyed the material property and yield stress of SUS304 with various temperature. Analysis results are compared with the yield stress of the material. We manufactured the furnace and conduct the verification experiments.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.413-414
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.503-504
• /
• 2007

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.488-490
• /
• 2008

This study aims to design the high-capacity vol-oxidizer using simulated fuels instead of spent nuclear fuels. Simulated fuels are fabricated by blending tungsten powder with silicon carbide powder, and thereafter, paraffin coating covers simulated fuels to increase their strength. An oxidation experiment using simulated fuels have been carried out in order to analyze oxidation characteristics similar to spent fuels. After oxidation, simulated fuels were almost oxidized to be powders. Increased volume of simulated fuels approached to spent fuels. These results can be utilized as important informations for designing a high-capacity vol-oxidizer.

• 방사성폐기물학회지
• /
• 제4권3호
• /
• pp.255-263
• /
• 2006

$UO_2$ 펠릿 20 kg HM/batch용 분말화 장치는 차세대관리 공정의 금속전환로 안으로 균질화된 분말을 공급하기 위하여 $UO_2$ 펠릿을 산화하여 $U_3O_8$으로 분말화하는 장치이다. 본 연구에는 $UO_2$ 펠릿 20 kg HM/batch용 분말화 장치 설계모델을 제시하고, 실증용 분말화 장치를 제작하여 검증실험을 수행한다. 분말화 장치 설계모델은 내부구조, 성능, 가열로 위치와 크기 등이 고려된다. 실험 방법은 $UO_2$ 펠릿 20 kg HM/batch용 분말화 장치 설계 모델에 따라 기존의 3단 메시 분말화 장치를 이용하여 분말의 메시 투과시험과 온도변화 특성 실험을 하여 장치 내부구조를 결정한다. $UO_2$ 펠릿 20 kg HM/batch의 산화 반응도 실험과 가열로 위치별 온도 분포를 측정하고 장치의 성능과 가열로의 영 역 위치를 결정한다. 장치 크기를 결정하기 위하여 산화전의 20kg의 $UO_2$ 펠릿과 산화후의 $U_3O_8$ 부피를 측정한다. 이상의 결과를 토대로 실증용 분말화 장치를 설계. 제작하고, 검증을 위하여 산화도, 분말특성 및 분석 등을 수행하였다. 산화반응 실험결과 에서 기존장치에 비하여 분말의 메시 투과율이 향상되었으며, 기존의 3단 메시 장치의 $UO_2$ 펠릿산화시간이 13시간 소요된 것에 비하여 8시간으로 단축되었다. $U_3O_8$ 분말 특성 분석결과, 평균 입도가 $40{\mu}m$이었다. 제작된 $UO_2$ 펠릿 20 kg HM/batch용 분말화 장치 성능과 설계모델 예측 값은 대체로 잘 일치되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.220.1-220.1
• /
• 2005

• 한국전기전자재료학회논문지
• /
• 제18권1호
• /
• pp.12-16
• /
• 2005

Chemical mechanical polishing (CMP) process is one of the most useful methods for improving the surface roughness of films. The effects of CMP on the surface morphology of WO$_3$ films prepared by RF sputtering system were investigated in this paper. A removal rate of films increased, and the uniformity performance of surface decreased with the addition of an oxidizer to the tungsten slurry. Non-uniformity performance of surface was superior as its value was below 5 % when oxidizers of 5.0 vol% and 2.5 vol%, respectively, were added to the tungsten slurry. The optimized oxidizer concentration, reflected both the improved roughness values and hillock-free surface with the good uniformity performance, was 5.0 vol% as an atomic force microscopy(AFM) analysis of thin film topographies. Our CMP results will be a useful reference for advanced technology of thin films for gas sensor applications in the near future.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.693-694
• /
• 2009

• 한국세라믹학회지
• /
• 제41권3호
• /
• pp.242-246
• /
• 2004

화염분무열분해(FSP) 공정을 이용하여 결정질의 좁은 입도분포를 가지는 $\alpha$-알루미나 나노입자를 제조하였다. 초미분의 액적을 형성시키기 위해 전구체 용액으로서 연료인 등유를 연속상으로 하고 산화제인 알루미늄 질산염 수용액을 분산상으로 하는 유중수적(W/O)형의 마이크로에멀전을 제조하였다 0.5M 농도의 알루미늄 질산염 수용액을 10vol%, 등유 80vol%, 그리고 유용성 유화제 10vol%를 혼합하여 안정한 분산상태를 가지는 마이크로에멀전을 제조한 후, 이류체 노즐 분무기를 사용하여 0.03㎫의 공기 압력으로 분무하여 화염에 직접 노출시켰다. 제조된 생성물은 20에서 30 나노미터의 균일한 크기를 가지는 $\alpha$-알루미나 상으로 확인되었다.