• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.135-148
• /
• 2005

This paper considers a six sigma project for reducing the project costs through project risk management. The project follows a disciplined process of five phases: define, measure, analyze, improve, and control. A risk management process map is used to identify process input and output variables. Seven key process input variables are selected by using C&E diagram and X-Y matrix and finally four vital few input variables are selected by the related statistical analysis. The optimum alternatives of the vital few input variables are obtained by the method of PUGH matrix. The process is running on control plan and we obtained substantial project cost reductions in early stage of the control phase.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.1
• /
• pp.9-17
• /
• 2006

This paper considers a six sigma project for improving productivity of the brace complement center pillar. The project follows a disciplined process of fife phases: define, measure, analyze, improve, and control. A process map is used to identify process input and output variables. Eleven key process input variables are selected by using X&Y matrix and FMEA, and finally eight vital few input variables are selected from analyze phase. The optimum process conditions of the vital few input variables are jointly obtained by maximizing productivity of the brace complement center pillar using DOE and alternative selection method.

• Journal of the Korea Construction Safety Engineering Association
• /
• s.37
• /
• pp.74-83
• /
• 2006

As there are more accidents which are more serious in construction site than other industries, it needs the safety management system to be SLIM on the same time, there are still lots of difficulties to prevent those accidents exactly, so it also needs a safety supervision team to prevent the accident, unsafe operation and condition before happening, which is also called as a Man-to Man safety management method. The range of the job site in one personnel's management is very big and large, so it needs the personnel to deep watch the safety operation and prevent any unsafe/fire accidents; the personnel also should find out the unsafe points in the job site, and carefully supervise the dead angle site, then support the totally safety management POINT and realize the ZERO accident.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.13-25
• /
• 2005

As there are more accidents which are more serious in construction site than other industries, it needs the safety management system to be SLIM on the same time, There are still lots of difficulties to prevent those accidents exactly, so it also needs a safety supervision team to prevent the accident, unsafe operation and condition before happening, which is also called as a Man-to-Man safety management method. The range of the job site in one personnel's management is very big and large, so it needs the personnel to keep watch the safety operation and prevent any unsafe/fire accidents. Also the personnel also should find out the unsafe points in the job site, and carefully supervise the dead angle site, then support the totally safety management POINT and realize the ZERO accident.

• The korean journal of orthodontics
• /
• v.20 no.3 s.32
• /
• pp.447-462
• /
• 1990

The objective of this experiment is to observe structural differences in the othodontic movement of vital (control group) and devitalized (experimental group) teeth in the mongrel dogs. The 5 utilized dogs in this experiment were approximately 1 year of age and their average weight was about 12 Kg. Endodontic therapy was performed on the 2nd premolars in upper & lower jaws of each animal under the general anesthesia by intravascular injection of 25mg/kg of pentobarbital sodium. The canals of the teeth were obturated by using gutta percha in conjunction with root canal sealer (AH26 Densply). One of the roots in the 2nd premolars was hemisected to make an extraction space for the devitalized teeth to be moved. The edgewise technique was employed for the movement of the teeth. Orthodontic models and intraoral roentgenograms were taken before and after orthodontic tooth movement. The open coil springs (.010 x .040) were used at interbraket space in order to provide equal forces (75gm) between the teeth in each arch wire. After 13 weeks of active orthodontic tooth movement, dogs were sacrified and the experimental results w ere examined through the intraoral radiography, microscopic examination and scanning electromicroscopic examination at the root sulfate. From the results of the study, the following conclusions may be drawn: The root resolution and cemental deposition were observed within the pressure and tension site in both group. 2. The root resorbed lacunae were observed in the cementum and/or into the dentin in both group. 3. The prominent osteoblastic activities were observed on the alveolar margin in the tension site in both group. 4. A few of blood vessels were observed in the pressure site, but also lots of blood vessels were observed in the tension site especially in the periphery of the alveolar bone in both group. 5. In the pressure site, resorbed lacunae were formed with deep and narrow cavity in the control group; the shallow and wide cavity in the experimental group. 6. In the pressure site, the repaired cementum or cementoid tissue was lined on cementum in the experimental group, but not in the control group. 7. There was no significant difference between external root resolution of endodontically and vital teeth when both were subjected to orthodontic forces.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.91-99
• /
• 2010

The purpose of this study was to present the 6 sigma technique in construction projects, and to review the possibility of 6 sigma introduction. DMAIC (Design, Measure, Analyze, Improve, Control) methodology was used to increase the utilization of TIMS (Technology Information Management System). The results of this study were as follows. The introduction of the 6 sigma technique was very effective in the construction industry, but there were many difficulties in its application because of the characteristics of construction. As the 6 sigma technique emphasizes management based on data, it is essential to accumulate historical data and to achieve the standardization of the construction business process. Furthermore, it is necessary to apply 6 sigma for the competitiveness of the construction industry, and the development of suitable 6 sigma methodology for the construction industry is required.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.4 s.54
• /
• pp.285-287
• /
• 2005

Using optimized standard methods, which were previously done by sensory tests, many factors have been analyzed and their significance were determined according to gloss and gloss-lasting capability in lipstick. Analyzing some factors we could conclude that the effective factors were the kind of wax, amount of volatile silicone oil, and stick hardness in the aspect of lipstick's gloss. And in the point of lipstick's gloss-lasting properties, vital few X's were quantity of volatile silicone oil stick hardness, and polymer contents and so on. We successfully have tried new analytical approach, 6-sigma to general property of lipstick. Furthermore this study will be a base on the prescription design in gloss-enhanced products.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.273-286
• /
• 2009

The objective of this research is to evaluate both quantitative analysis and qualitative analysis by comparing vital variable factors of the golf swing successes and the failures. At the moment of swing, each body segment and the movement of the club as well as kinematical parameters were produced by utilizing the 3-D swing analysis for the high school female golfers. As kinematical parameters, it analyzes the 3-D analysis and ground reaction force about the location change, velocity and angle. The 3-D swing analysis and ground reaction force location change, velocity and angle are analyzed for Kinematical parameters. As a result, the stable swing is maintained by club head showing very few front-back movement (X) when the address and the top swing. Also, the center of mass velocity contributes to the momentum increase by showing very rapid velocity when successful comparing with when failed at the time of top swing of left-right(Y) and it is thought that by lessening the cocking angle when successful from the top swing to the impact, it influences the linear velocity increase and has a good effect on a non-distance increase. It shows that Ground reaction force (GRF) is examined by showing the stable approval rating in a front-back(X) direction and left-right(Y) and connected to a successful swing.

• Journal of Chest Surgery
• /
• v.8 no.2
• /
• pp.109-118
• /
• 1975

This is a report on four cases of the lobar emphysema due to proximal bronchial obstruction in the Department of Thoracic Surgery, Hanyang University Hospital, during the period of three and half years from 1972 to 1975. First case, a two years old male child was referred to our Department with the lobar emphysema of the lower lobe of the right lung with pneumonia. This emphysema was developed after aspiration of a piece of peanut. Bronchoscopy revealed that the bronchus of the right lower lobe was obstructed with the foreign body, however removal of the peanut through bronchoscope was not attempted because of corruption and softening of the peanut. The removal of the peanut by bronchotomy was performed after subsiding of acute phase of pulmonary infection. Postoperative course was uneventful and the emphysema was disappeared. Second case, a twenty months old female baby was referred to our Department with lobar emphysema of the lower lobe of the left lung. The emphysema was suddenly developed with coughing and dyspneic symptoms and the diagnosis was made roentgenologically. She gave a history of reccurrent infections of the respiratory tract after birth. Bronchoscopy showed an obstruction of the left main bronchus with the growing of fibrinous tissue on the bronchial mucosa. The protruded tissue in the left main bronchus taken out about O.8ml with biopsy forceps for histological examination. After this procedure, the emphysema of the left lung was disappeared. Histological finding was reported to be a chronic inflammatory granulation tissue. Third case, a two and half years old male child was referred to our Department with roentgenological lobar emphysema. Two weeks prior to admission he had an episode of sudden onset of coughing attack with dyspnea. Bronchoscopy revealed that the bronchus of the left lower lobe was obstructed with a mass which was strongly suspected of a neoplastic tissue. At operation, there was found a perforation of enlarged tuberculous lymph node in the bronchus of the left lower lobe and protrusion of granulation tissue into the bronchus. Ruptured orifice on themembranous wall of the left lower lobe bronchus was closed with interrupted suture after the" removal of a perforated tuberculous lymph node. Postoperative course was uneventful and antituberculous chemotherapy was given. Fourth case, a 47 years old man was admitted to our Department with the complaint of severe dyspnea of few months duration. Twenty years ago, he had a history of lung tuberculosis and was treated for many years. X-ray examination including tomography and bronchography revealed that the upper lobe of the right lung was destroyed with cavities, the lower lobe was completely shrunk, and the right middle lobe was strongly overdistended with narrowing bronchial trees. Differential bronchospirometry and lung scanning confirmed that the respiratory function of the affected lung was impaired almost totally. The value of the right lung was calculated on 6% of oxygen uptake, 1% of Minute volume, and 32% of vital capacity. The right pneumonectomy was performed under the careful consideration of anesthetic and surgical procedures. Postoperative course was uneventful and the respiratory function was improved nearly to the normal level.evel.