• 한국가시화정보학회지
• /
• 제22권2호
• /
• pp.96-103
• /
• 2024

As micro-electronic devices are getting miniaturized, technology that can manage the temperature of confined area is required. On these demands, microchannel heat exchanger is suggested as promising solution. However, due to laminar flow created inside the microchannel with high Reynolds number suppresses diffusion based natural convection, leads to low heat transfer performance of microchannel. This paper shows how acoustic streaming flow enhances the heat transfer performance inside the microchannel without using additional structure or nanoparticle inside the straight microchannel and fluid numerically. Various parameters, such as Reynolds number (Re), initial displacement (ξ) was adopted to evaluate the influence of acoustic streaming flow. The results showed that acoustic streaming flow can disturb the thermal boundary, by creating the micro-vortex inside the straight-microchannel and enhance the heat transfer performance.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.77-82
• /
• 2004

This paper describes the improvement of engine cooling system. To improve engine cooling performance, the authors approached in two ways. One is to increase water pump performance, changing of impeller shape and lightening of material were carried out. The second one is cooling efficiency rise, which were investigated with head gasket coolant flow passage optimization with flow visualization technique. The test results show that water pump performance was increased effectively, reduction of pump drive torque, and increase of pump flow-rate and pressure rise. Gasket hole pattern optimization test results represent an optimized head coolant flow which stands cross flow from exhaust to intake port side and small vortex were removed.

• 인터넷정보학회논문지
• /
• 제16권6호
• /
• pp.31-37
• /
• 2015

최근 사물인터넷 발달로 인하여 센서에서 발생되는 데이터가 폭증하고 있다. 이러한 패러다임의 변화로 즉각 행동이 요구되는 여러 산업현장에서 실시간으로 발생되는 데이터들의 분석이 필요하게 되었으며, 실시간 시각화 분석이 대두되고 있다. 그러나 기존 시각화 시스템은 데이터를 저장 후에 시각화를 하기 때문에 서버의 응답시간이 실시간에 준하는 ms수준의 처리를 보장하지 못하며, 처리할 자원을 보유하고 있지 않아 주요 자원이 될 데이터를 폐기하는 문제가 발생한다. 따라서 본 논문에서는 가드닝 환경에서 IoT 센싱 정보를 활용하여 실시간 시각화 알고리즘을 적용한 스마트가드닝 시스템을 설계 및 구현하였다. 제안 시스템의 성능 평가를 위하여 서버의 응답시간을 측정하였고, 테스트 결과 제안하는 실시간 시각화 알고리즘의 응답 속도는 실시간에 준하는 ms수준의 처리를 보장함을 확인하였다.

• Physical Therapy Rehabilitation Science
• /
• 제4권1호
• /
• pp.28-31
• /
• 2015

Objective: Psychomotor imagery has been widely used to improve motor performance and motor learning. Recent research suggests that during visualization, changes occur in neurophysiological networks that make physical practice more effective in configuring functional networks for skillful behaviors. The aim of our pilot study was to determine if there was change and to what extent there was differentiation in modulation in electroencephalography (EEG) frequencies between visualizing a state of rest and a state of exercise performance and to identify the preponderant frequency. Design: Quasi-experimental design uncontrolled before and after study. Methods: EEG brain wave activity was recorded from 0-40 Hz from nine cerebral cortical scalp regions F3, Fz, F4, C3, Cz, C4, P3, POz, and P4 with a wireless telemetric EEG system. The subjects, while sitting on a chair with eyes closed, were asked to visualize themselves in a state of routine rest/relaxation and after a period of time in a state of their routine exercise performance. Results: The gamma frequency, 31-40 Hz, (${\gamma}$) was the predominant wave band in differentiation between visualizing a state of rest versus visualizing a state of exercise performance. Conclusions: We suggest these preliminarily findings show the EEG electrocortical activity for athletes is differentially modulated during visualization of exercise performance in comparison to rest with a predominant ${\gamma}$ wave band frequency observed during the state of exercise. Further controlled experimental studies will be performed to elaborate these observations and delineate the significance to optimization of psychomotor exercise performance.

• 한국가시화정보학회지
• /
• 제14권1호
• /
• pp.19-26
• /
• 2016

Modern people spend much time at indoor space. So, People want to make better indoor air condition. But the facade of building is made of glass to be seen urbanely, the effect of solar radiation makes indoor environment worse. This study designs an open space affected by solar radiation with 4-way cassette air-conditioner. Using numerical simulation, this paper investigates thermal comfort and ventilation performance with discharge angles $30^{\circ}$ and $45^{\circ}$. To study thermal comfort, this paper studies distribution of velocity, temperature and effective draft temperature. Also, this paper introduces concept of air age to study ventilation performance. The flow influenced by solar radiation determines thermal comfort and ventilation performance in room space. This study shows that discharge angle of 45 degree has better thermal comfort and ventilation performance than that of 30 degree.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권1호
• /
• pp.36-41
• /
• 2009

Self organizing map(SOM) is one of the unsupervised methods based on the competitive learning. Many clustering works have been performed using SOM. It has offered the data visualization according to its result. The visualized result has been used for decision process of descriptive data mining as exploratory data analysis. In this paper we propose improvement of SOM using stratified sampling of statistics. The stratification leads to improve the performance of SOM. To verify improvement of our study, we make comparative experiments using the data sets form UCI machine learning repository and simulation data.

• 한국가시화정보학회지
• /
• 제15권1호
• /
• pp.19-24
• /
• 2017

In this study, we conduct a numerical experiment of the single 5MW NREL wind turbine and compare the performance of various vortex core identification for the wake behind the wind turbine. In the kinetic analysis of wind turbine, 20% velocity deficit at 200 s is observed, showing wake which contains tip vortex near blade tip and rotor vortex at the center of the wind turbine. Time series of velocity and turbulent intensity show numerical simulation converge to a quasi-steady state near 200 s. In the comparison between methods for vortex identification, ${\lambda}_2$-method has good performance in terms of tip vortex, rotor vortex, vortex during its cascade process compared to vorticity magnitude criteria, ${\Delta}$-method. We conclude that ${\lambda}_2$-method is suitable for vortex identification method for wake visualization.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.23-32
• /
• 2002

Combustion and flame propagation characteristics of the liquid phase LPG injection (LPLI) engine were investigated in a single cylinder optical engine. Lean bum operation is needed to reduce thermal stress of exhaust manifold and engine knock in a heavy duty LPG engine. An LPLI system has advantages on lean operation. Optimized engine design parameters such as swirl, injection timing and piston geometry can improve lean bum performance with LPLI system. In this study, the effects of piston geometry along with injection timing and swirl ratio on flame propagation characteristics were investigated. A series of bottom-view flame images were taken from direct visualization using an W intensified high-speed CCD camera. Concepts of flame area speed, In addition to flame propagation patterns and thermodynamic heat release analysis, was introduced to analyze the flame propagation characteristics. The results show the correlation between the flame propagation characteristics, which is related to engine performance of lean region, and engine design parameters such as swirl ratio, piston geometry and injection timing. Stronger swirl resulted in foster flame propagation under open valve injection. The flame speed was significantly affected by injection timing under open valve injection conditions; supposedly due to the charge stratification. Piston geometry affected flame propagation through squish effects.

• 한국항공우주학회지
• /
• 제35권6호
• /
• pp.467-473
• /
• 2007

스텔스 무인전투기 형상 주위 유동장의 수동에서의 흐름가시화 시험을 통한 기본 공력 특성 파악 연구가 수행되었다. 시험은 자유류 속도 12.7 cm/sec와 평균시위 기준 레이놀즈수 $1.4{\times}10^4$에서 수행되었다. 물감을 사용하여 가시화된 와류의 생성 및 붕괴 현상은 앞서 수행된 힘과 모멘트 측정 결과와 비교되었다. 시험 결과 낮은 받음각에서는 동체와 날개 junction 와류가 큰 영향을 주지만, 높은 받음각 영역에서는 전방동체 와류 거동이 공력에 지배적인 영향을 줌을 확인하였다.

• 한국정밀공학회지
• /
• 제31권4호
• /
• pp.311-317
• /
• 2014

As products have been more complex and customer's demands of personalized products are increasing, manufacturing system has been changed from mass production to mass customization production that makes small quantity but different kinds of product. In addition, it becomes important that manufacturers quickly respond to variable customer's demands and characteristic regulations in each country. Therefore, three prerequisites are essential for manufacturers to response agilely. First, manufacturing data should be monitored in real time, second, information is extracted from the data, and finally, the information is used to make manufacturing strategy. In this paper, the mobile dashboard system is presented. It visualizes manufacturing data on mobile devices, and measures performance of the shop floor through the information. The proposed system is composed of server and client, and is running on the R - the open source software for statistics. Four kinds of template are given for easy visualization through the system.