Browse > Article

Flame Propagation Characteristics in a Heavy Duty Liquid Phase LPG Injection SI Engine by Flame Visualization  

김승규 (한양대학교 기계공학과)
배충식 (한양대학교 기계공학과)
이승목 (자동차부품연구원 동력시스템실)
김창업 (자동차부품연구원 동력시스템실)
강건용 (자동차부품연구원 동력시스템실)
Publication Information
Transactions of the Korean Society of Automotive Engineers / v.10, no.4, 2002 , pp. 23-32 More about this Journal
Abstract
Combustion and flame propagation characteristics of the liquid phase LPG injection (LPLI) engine were investigated in a single cylinder optical engine. Lean bum operation is needed to reduce thermal stress of exhaust manifold and engine knock in a heavy duty LPG engine. An LPLI system has advantages on lean operation. Optimized engine design parameters such as swirl, injection timing and piston geometry can improve lean bum performance with LPLI system. In this study, the effects of piston geometry along with injection timing and swirl ratio on flame propagation characteristics were investigated. A series of bottom-view flame images were taken from direct visualization using an W intensified high-speed CCD camera. Concepts of flame area speed, In addition to flame propagation patterns and thermodynamic heat release analysis, was introduced to analyze the flame propagation characteristics. The results show the correlation between the flame propagation characteristics, which is related to engine performance of lean region, and engine design parameters such as swirl ratio, piston geometry and injection timing. Stronger swirl resulted in foster flame propagation under open valve injection. The flame speed was significantly affected by injection timing under open valve injection conditions; supposedly due to the charge stratification. Piston geometry affected flame propagation through squish effects.
Keywords
Sin81e cylinder optical engine; Combustion chamber; Lean bum; Injection timing; Swirl; Squish; LML; Flame visualization;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 J. Weide, J. Seppen, J. Ling, H. Dekker, 'Experience with CNG and LPG Operated HeavyDuty Vehicles with Emphasis on US HD Diesel Emission Standards,' SAE 881657, 1988
2 G. Hundleby, 'Low Emissions Approaches for Heavy-duty Gas-powered Urban Vehicles,' SAE 892134, 1989
3 A. Quader, 'The Axially-stratified-charge Engine,' SAE 820131, 1982
4 Y. Moriyoshi, T. Muroki, 'Proposition of a Stratified Charge System by Using In-cylinder Gas Motion,' SAE 952455, 1995
5 K. Jeong, 'Initial Flame Development under Fuel Stratified Conditions,' SAE 981429, 1998
6 J. Heywood, Internal Combustion Engine Fundamentals, McGraw Hill, pp.353-357, 1988
7 Ricardo Steady State Flow Bench Port Performance Measurement and Analysis Technique DP 93/0704, Ricardo, 1993
8 S. Matsushita, 'Development of Toyota Lean Burn Combustion System,' SAE 850044, 1985
9 A. Gomez, P. Reinke, 'Lean burn : A review of Incentives, Methods, and Tradeoffs,' SAE 880291, 1988
10 S. Goto, D. Lee, J. Shakal, N. Harayama, F. Honjyo, H. Ueno, 'Performance and Emissions of an LPG Lean-burn Engine for Heavy Duty Vehicles,' SAE 1999-01-1513, 1999
11 J. Yu, 'Ignition and Flame Kernel Development Relevant to Aero Gas Turbine Combustors,' Ph. D. Thesis, Mech. Eng. Dept, University of Leeds, 2000
12 B. Johansson, K. Olsson, 'Combustion Chamber for Natural Gas SI Engines Part I : Fluid Flow and Combustion,' SAE 950469, 1995
13 C. Arcoumanis, A. Bicen, J. Whitelaw, 'Squish and Swirl-squish Interaction in Motored Model Engine,' ASME Journal of Fluid Engineering Vol.105, pp.105-112, 1983   DOI
14 T. Fansler, 'Turbulence Production and Relaxation in Bowl-in-piston Engines,' SAE 930479, 1993
15 Y. Moriyoshi, T. Kamimoto, T. Hayashi, 'Combustion Enhancement of Very Lean Premixture Part in Stratified Charge Conditions,' SAE 962087, 1996
16 O. Pajot, C. Mounaim-Rousselle, 'Instantaneous Flow Effect on the Flame Kernel in S.I. Engine by Simultaneous Optical Diagnostics,' SAE 2000-01-1796, 2000
17 R. Sierens, 'An Experimental and Theoretical Study of Liquid LPG Injection,' SAE 922363, 1992