• 한국가시화정보학회지
• /
• 제13권3호
• /
• pp.24-28
• /
• 2015

The temperature of the wafer batch in the furnace was calculated and its visualized temperature field was analyzed. The main heat transfer mechanisms from the heater wall to the wafers were radiation and conduction, and the finite difference method was used to analyze the complex heat transfer including those two mechanisms. The visualized temperature field shows that the direction of the heat flux in the wafer batch varies during the heating process, and the heat in the wafer batch diffuses faster by conduction within the wafer than by radiation between the wafers, in the condition of the constant temperature at the heater wall and cap.

• 한국가시화정보학회지
• /
• 제9권3호
• /
• pp.30-37
• /
• 2011

The thrust vectoring concept has been used for use in new advanced supersonic aircraft. This study presents the performance characteristics of the thrust vectoring nozzle by visualizing the shock behaviors with Schlieren method. The scaled models were designed and manufactured to see the shock behaviors of the various airflow condition. Also we executed experimental tests to see the geometrical effects of the thrust vector nozzle by changing pitch angle and length of pitch flaps. From this study we could understand the supersonic flow characteristics of the thrust vector nozzle. The total thrust of thrust vector nozzle is diminished by increasing the flap angle. But there is an optimum flap length ratio for attaining the highest thrust level and proper pitch effect.

• 한국가시화정보학회지
• /
• 제9권2호
• /
• pp.16-20
• /
• 2011

This paper presents a fabrication method of microcapsules encapsulating fluorescent nanoparticles sensitive to an organic liquid, which is potentially applicable to the encapsulation of protein, cell and drug. It uses the supra-molecular self-assembly of a block copolymer at the interface of the stable and controllable droplets of water suspended with fluorescent nanoparticles and the polymer solved organic. The size and uniformity of the microcapsules were examined for the various polymer concentrations by using SEM image analysis. The maximum standard deviation of the produced microcapsules of less than 3.5% was obtained from the microcapsules produced from the same conditions. The inclusion of fluorescent nanoparticles was visualized in the fluorescence microscope and by using TEM image. It is shown that this fabrication method can provide the uniform size microcapsules with a higher inclusion.

• 한국가시화정보학회지
• /
• 제9권2호
• /
• pp.27-33
• /
• 2011

Supersonic liquid jet discharged from a nozzle has been investigated by using a ballistic range which is composed of high-pressure tube, pump tube, launch tube and liquid storage nozzle. High-speed Schlieren optical method was used to visualize the supersonic liquid jet flow field containing shock wave system, and spray droplet diameter was measured by the laser diffraction method. Experiment was performed with various types of nozzle to investigate the major characteristics of the supersonic liquid jet operating at the range of total pressure of 0.8 from 2.14 GPa. The results obtained shows that shock wave considerably affects the detailed atomization process of the liquid jet and as the nozzle diameter decreases, the shock wave angle and the averaged SMD of spray droplet tends to decrease.

• International Journal of Fluid Machinery and Systems
• /
• 제7권2호
• /
• pp.80-85
• /
• 2014

In this study, we visualized the internal flow of a regenerative turbomachinery using the direct injection tracer method. For visualization, the working fluid was water and the tracer was oil colors (marbling colors). Droplets were injected at the inlet of the machinery and the streak were recorded using a high-speed camera with high-power light sources. While circulating inside the groove, the droplets were translated by the rotational motion of the impeller. When the droplets flow out of the impeller groove, relative to the impeller, they moved more slowly. And the droplets repeatedly reentered into the groove and circulated again. Then the droplets either flowed to the outlet or to the stripper. As a result, this experiment has confirmed the internal circulating flow of a regenerative turbomachinery.

• 한국과학교육학회지
• /
• 제34권4호
• /
• pp.359-366
• /
• 2014

본 연구는 물리 I 교과서에 사용한 시각화 자료들을 인포그래픽 차원의 체계적인 분석방법을 통해 그 특징을 살펴보고자 하였다. 이를 위해 인포그래픽 분석틀을 개발한 후, '정보와 통신' 단원에 제시된 시각화 자료들을 '데이터 시각화'와 '인포그래픽'으로 구분하여 분석하였다. 연구결과는 다음과 같다. 첫째, 인포그래픽 분석틀은 정보내용, 시각표현, 매체형식으로 구분된다. 둘째, 물리 I 교과서의 '정보와 통신' 단원에 나타난 시각화 자료들은 정보를 단순 도식화한 자료가 가장 많았다. 셋째, 교과서에 제시된 시각화 자료들의 특징을 '정보내용' 면에서는 관계와 기능에 관련된 내용이, '시각표현 요소' 면에서는 문자나 메타포가, '시각표현 유형' 면에서는 일러스트형과 비교분석형이, '시각표현 방식'은 그래픽이, '매체형식'은 인쇄가, '시선의 흐름'에서는 수평형과 수직형이 많았다. 이상과 같은 분석 결과로부터, 물리 I 교과서의 '정보와 통신' 단원은 시각화 자료를 많이 사용하지만, 단순 도식자료만을 제시할 뿐 풍부한 인포그래픽을 제공하지 않는다는 것을 알 수 있었다. 이번 연구를 통해 개발한 인포그래픽 분석틀과 교과서 분석 결과를 활용하여 과학교육에서도 인포그래픽의 중요성을 파악할 수 있는 계기가 마련되기를 기대해 본다.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제6권12호
• /
• pp.533-540
• /
• 2016

정보시각화는 데이터나 정보를 다양한 도구를 활용해 시각적으로 나타내는 정보기술이다. 시각적인 정보는 사용자 직관성을 높일 수 있으며 이는 특정 정보를 짧은 시간에 관찰하고 이해할 수 있는 효율적인 방안이 될 수 있다. 최근 인문학의 연구방법론으로 디지털 인문학에 대한 인문·지역학자들의 관심이 높은 시점에서 정보시각화는 연구를 위한 기초자료 수집이나 정보 분석 등을 위해 활용된다. 또한 이를 위한 방안으로 전자문화지도, 네트워크, 멀티미디어 등 다양한 형태의 정보시각화 방법에 대한 연구가 활발하다. 본 논문에서는 웹 기반 동적 시각화 기술인 D3를 활용하여 정보의 시각화 방안에 대해 연구한다. 세부적으로 이슬람 압바스 왕조를 대상으로 압바스 왕조를 구성하는 주요 인물 간의 관계를 노드와 연결선을 활용해 시각화하여 나타냄으로써 객체 간의 연관 관계를 분석하는데 활용하고자 한다. 관련 분야 연구자들은 분석된 정보를 연구에 기초 자료로 활용하는 등 연구 활동에 활용할 수 있다.

• 한국가시화정보학회지
• /
• 제9권4호
• /
• pp.63-68
• /
• 2011

The flow-field of a liquid-metal system is very important for the safety analysis and the design of the steam generator of liquid-metal fast breeder reactor. Dynamic neutron radiography (DNR) is suitable for a visualization and measurement of a liquid metal flow and a two-phase flow in a metallic duct. However, the three dimensional DNR techniques is not enough to obtain the velocity information in the wide channel up to now. In this research, a high speed DNR technique was applied to visualize the heavy liquid-metal flow field in the narrow channel with the HANARO-beam facility. The images were taken with a high frame-rate neutron radiography at 250 fps and analyzed with a Particle Image Velocimetry(PIV) method. The images were compared with the results of the commercial CFX code to study the feasibility of DNR technique for the measuring the heavy liquid-metal flow field. The PIV images could discern the turbulent vortex flow in the two-dimensional narrow channel.

• 한국안전학회지
• /
• 제28권5호
• /
• pp.21-26
• /
• 2013

Delamination of cover concrete due to re-bar corrosion is a critical damage reducing structural safety of reinforced concrete structures. Therefore, it should be detected and evaluated to provide appropriate maintenance to recover structural integrity. Impact-echo method, which utilizes thickness vibration characteristics of delaminated concrete section, is effective for detection and evaluation of small areal size delamination. However, it may not be applicable for large areal size delamination in which flexural vibration modes are dominated. In this study, applicability of vibration mode shapes of delaminated concrete section is investigated for visualization of delamination region in concrete structures. Numerical and experimental modal tests are performed to estimate mode shapes of delaminated concrete section and linear absolute summation technique is proposed for effective visualization of delamination region based on estimated mode shapes.

• 대한기계학회논문집B
• /
• 제32권1호
• /
• pp.62-69
• /
• 2008

A post-processing program based on the OOP(Object-Oriented Programming) concept has been developed for flow visualization of the flow analysis code(PowerCFD) using unstructured cell-centered method. User-friendly GUI(GTaphic User Interface) has been built on the base of MFC(Microsoft Foundation Class). The program is organized as modules by classes including those based on VTK(Visualization ToolKit)-library, and these classes are made to function through inheritance and cooperation which is an important and valuable OOP concept. The major functions of this post-processor program are introduced and demonstrated, which include mesh plot, contour plot, vector plot, surface plots, cut plot, clip plot, xy-plot and streamline plot as well as view manipulation (translation, rotation, scaling etc).