• Journal of Advanced Marine Engineering and Technology
• /
• 제27권7호
• /
• pp.817-825
• /
• 2003

The amount of damage suffered from the red tide occurring at the near shore is increasing rapidly. The Windows visual system discussed in this paper is developed in order to help minimize the damage. The system is focused on the monitoring the coastal environment. and forecasting the red tide occurrence. Although several similar systems are now existing. most of them are based on the web application. which cause the large response time. limited presentation ability of data. and inability of data storing at client side. The Windows visual system described in this paper operates on the Internet to get the ubiquitous access. One of three components of the Windows visual system. client system is developed as a Windows application in order to overcome the weak points of the previous systems. The gathering. analysis, and monitoring of data can be done at real time using the Windows visual system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.743-744
• /
• 2008

By using DirectX technology, an improved Visual Monitoring System implemented in this paper. The proposed Visual Monitoring System is developed based on the S3C2440 processor. The Windows CE 5.0 is adopted as an operating system, and Visual Monitoring System transfer image 15 frame per second using UDP/IP and by using AdaBoost Algorithm, detect face region and save face image.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.602-607
• /
• 2003

Sensors based bridge monitoring system (SBBMS) is designed to perform real-time monitoring and to store the performance history of in-service bridges. In general, visual inspections play a major role in maintenance of in-service bridges; however, they are not adequate to document the behavior of a bridge. Therefore, visual inspections and sensor based monitoring systems complement each other. Sensor based bridge monitoring systems consist of hardware and software systems. The hardware system contains the sensors and data-loggers to measure the behavior of a structure, the communicational equipment to transmit the measured data from the site to the monitoring center, and the computers to arrange and analyze the data. The software system controls data-loggers, arranges and analyzes the measured data, makes real-time display, stores the performance history.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.607-614
• /
• 2000

A cost-effective automated slope monitoring system is developed to monitor hazardous cut slopes along highways. This automated slope monitoring system consists of data-collection and visual monitoring, data-transmitting, database and internet service, and alarm system. Wire-line extensometer, automatic raingauge, and CCD camera are selected as monitoring instruments in this system, after consideration of failure characteristics of roadside cut slopes in the country. This paper describes the important features of this newly developed automated slope monitoring system.

• 조명전기설비학회논문지
• /
• 제23권1호
• /
• pp.125-131
• /
• 2009

본 논문에서는 무선랜 환경에서 주행 로봇 플랫폼에 의한 원격 영상 감시 시스템을 제안하였다. 제안된 방법은 ARM9코어기반의 PXA255 프로세서 시스템에 소형 CMOS 카메라를 장착하고 촬영한 영상을 803.11b/g 무선 네트워크를 이용하여 전송하는 이동형 원격 영상 감시 시스템을 구성하였다. 로봇플랫폼의 주행 명령을 원격으로 전송하며, 촬영된 영상은 $640{\times}480$, $320{\times}240$픽셀 등의 정지 영상을 초당 $3{\sim}10$프레임의 속도로 전송하였으며, 시스템을 구현하고 영상에 의한 원격감시기능을 적절히 수행할 수 있음을 실험을 통하여 확인하였다. 제안된 시스템은 리눅스 운영체제를 기반으로 구축하였다.

• 한국정보처리학회논문지
• /
• 제7권1호
• /
• pp.115-125
• /
• 2000

본 논문에서는 반도체 웨이퍼 세정 장비를 위한 모니터링 시스템의 기본 요소와 이를 기반으로 모니터링 시스템 모델을 제시한다. 기본 요소는 모니터링 시스템에서 요구되는 필수적인 기능으로써 제어 시스템과의 통신, 사용자 인터페이스, 원격 감시 시스템과의 통신, 감시 데이터 관리, 테스크간 통신으로 구성된다. 기본 요소들의 기능과 기본 요소들 간의 관계를 정의하여 독립된 테스크로 설계한다. 제시한 모델의 타당성을 평가하기 위하여 Windows NT에서 Visual C++를 사용하여 기본 요소들을 구현하여 반도체 웨이퍼 세정 장비의 모니터링 시스템에 적용해 보았다.

• 제어로봇시스템학회논문지
• /
• 제9권3호
• /
• pp.242-250
• /
• 2003

We propose the monitoring system scheme for the CPS/INS integrated navigation system. The design requirements of the monitoring system are suggested and the software scheme based on GUI is proposed. The proposed monitoring system consists of an I/O interface part, a navigation data display part, and a post-processing part. The I/O interface part is responsible for data communication between the monitoring system and a navigation computer unit. The navigation data display part provides various display methods to show the navigation data to user in real-time. The post-processing part collects the navigation data to analyze the performance of navigation system. The proposed monitoring system software was developed using the Visual C++ programming language and a van test was carried out to demonstrate the real-time operation of the monitoring system. The test result shows that the proposed monitoring system can be effectively applied to the CPS/INS integrated navigation system.

• 한국지반공학회논문집
• /
• 제23권5호
• /
• pp.53-62
• /
• 2007

최근 구조물의 안정성 평가를 위해서 많은 고가의 고정밀도 자동화 계측장치가 개발 사용되고 있다. 그러나 정밀장치를 사용한 기존의 수동계측은 대형구조물 전체에 대해 실시간 계측이 불가능하며 자동화계측에도 막대한 비용이 요구되는 단점이 있다. 따라서 본 연구에서는 실시간 수치사진영상을 이용한 3차원 자동화 비쥬얼모니터링시스템을 개발하였다. 그리고 대형구조물의 실시간 계측분야에 있어서 개발시스템의 적용성 및 정밀도에 대한 신뢰성을 확인하기 위해 콘크리트 벽면의 강체변위에 대한 계측실험과 보강토옹벽블록의 변위계측실험을 실시하였고, 실험결과를 기존의 정밀계측장치인 토탈스테이션의 측정결과와 비교하였다. 이를 바탕으로 개발시스템이 기존 계측시스템의 단점을 해결할 수 있었고, 고정밀도이면서 실시간 계측시스템으로서의 활용이 가능함을 확인할 수 있었다.

• Journal of Information Processing Systems
• /
• 제8권2호
• /
• pp.347-358
• /
• 2012

Recently, security researches have been processed on the method to cover a broader range of hacking attacks at the low level in the perspective of hardware. This system security applies not only to individuals' computer systems but also to cloud environments. "Cloud" concerns operations on the web. Therefore it is exposed to a lot of risks and the security of its spaces where data is stored is vulnerable. Accordingly, in order to reduce threat factors to security, the TCG proposed a highly reliable platform based on a semiconductor-chip, the TPM. However, there have been no technologies up to date that enables a real-time visual monitoring of the security status of a PC that is operated based on the TPM. And the TPB has provided the function in a visual method to monitor system status and resources only for the system behavior of a single host. Therefore, this paper will propose a m-TMS (Mobile Trusted Monitoring System) that monitors the trusted state of a computing environment in which a TPM chip-based TPB is mounted and the current status of its system resources in a mobile device environment resulting from the development of network service technology. The m-TMS is provided to users so that system resources of CPU, RAM, and process, which are the monitoring objects in a computer system, may be monitored. Moreover, converting and detouring single entities like a PC or target addresses, which are attack pattern methods that pose a threat to the computer system security, are combined. The branch instruction trace function is monitored using a BiT Profiling tool through which processes attacked or those suspected of being attacked may be traced, thereby enabling users to actively respond.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.37-41
• /
• 2002

This study has been focused on the development of an open architecture CNC system and integration of core application technology for machine tool such as a remote monitoring/diagnosis system, NURBS interpolation, and cutting process simulation. To do this, we have developed a comprehensive CNC software including the basic HMI, screen editor, ASF, and visual builder. As a control hardware system for machine tool, the universal I/O module and CNC main unit have been developed. Then the remote monitoring/diagnosis system and NURBS interpolation have been implemented in the CNC software. The cutting simulation software will be used for enhancing the productivity of machine tools. Through a simulator and test bed, the whole technology has been verified.