• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.2
• /
• pp.76-82
• /
• 1997

In paper the evenness of planar distribution of mass in a small scale is called formation (orbetter:mass formation). Traditionally formation has been assessed visually, by looking the sheet of paper against transmitted light. Different kinds of optieal testers are being usd to obtain quantitative rankings htat would be independent of the observer but would well correspond to the visual assessment. However, various raw-material and process factors do influence light trans-mittance in paper and do impair the correspondence between basis weight and the optical formation measurement (or visual assessment). As the optical formation test methods do not incorporate an efficient calib ration routine, the formation of the sophisticated paper grades of today the is rather difficult to measure optically and may lead to erroneous results. It may be concluded that the optical measurement is not suitable for paper grades with high filler content. coating, heavy calendering or that are made of heavily beaten pulp, nordoes it apply for dyed or printed papers. For this reason, visual assessment and optical evaluation shoild be replaced with a measurement that gives reliable results independent on paper grode and manufacturing process. Formation measuremend based on beta radiation is suitable for all paper grades regardless to the material contents or process treatment. It is possible to measure even dyed or printed samples. Thonks to a sim ple and relioble calibration, the results are converted to real basis weight balues that remain reliable even with time. The only beta tester commercially available is the AMBERTEC Beta Formation Tester. Formation of paper does vary locally in the web. Typically there exists a formation profile, too similarly to other properties of paper. Therefore, formation should ？ ays be expressed as a mean of a sufficient amount of parallel determinations. All formation measurements should be calibrated against basis weight.

• The Journal of Korean Association of Computer Education
• /
• v.12 no.5
• /
• pp.1-13
• /
• 2009

Systematic information protection education is necessary to evoke the importance of information protection to the students and to provide them with alternatives to cope with malicious attacks. However, there have been too little development of the methods of systematic education and teaching materials to allow an effective education of information protection in the classrooms today. In this paper, we developed principle-oriented visual learning materials using UCC (User Created Content) for an effective education of information protection and evaluated the effectiveness of our approach with independent sample t-test method after being used in two classes, a test group and a control group. In particular, using UCCs, which have become the most frequently used contents in the Internet, as visual material for the education of information protection, proved to be effective in promoting the interest of students in classes and highly useful in education.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.54-54
• /
• 2008

$Eu^{2+}$, $Nd^{3+}$ co-doped $BaAl_2O_4$ are known as a long afterglow phosphor. We found that $Eu^{2+}$-doped $BaAl_2O_4$ showed ptotoconductivity in the range of UV and visual light. In this study, $BaAl_2O_4$:Eu thin film has been prepared by RF sputtering method and a sensing characteristics to UV and visual light was performed. Only $Eu^{2+}$ and $Nd^{3+}$ co-doped $BaAl_2O_4$ powders and targets for deposition were prepared by a convention solid state method, and the deposition was performed in a reducing $H_2$-Ar mixture gas on Si substrates. The observation of crystalline phase and morphology of the sputtered film were performed using XRD, EDX. The photoluminescence and photocurrent to UV and visual light were measured simultaneously using 300W-Xe solar simulator as a light source. It was confirmed that the photocurrent induced by irradiation of light showed a linear relationship to the light intensity.

• Journal of Fashion Business
• /
• v.25 no.1
• /
• pp.1-15
• /
• 2021

Consumption value has widened, not only in functional but also aesthetic aspects, and consumers have started to find products that are more individual and emotional. The pattern of natural motifs meets the needs of consumers, and the marble is also widely used in patterns as one of the natural motifs. In this study, we analyzed many fashion items and other products with marble patterns based on the elements of CMF design, which are important points in merchandise design. For research, data on marble and its patterns have been found in professional books about marble. Foreign and domestic cases were investigated from well-known design exhibitions. Results of the study demonstrate the potential for pattern representation that stimulates consumers' senses by using color or material to express a variety of visual patterns, and using many finishing methods to express textured patterns. However, most of the domestic cases have only imitated the visual features of marble patterns, and very few have expanded the scope of the use of the patterns. A domestic research study was conducted only on the chemical features of marble, while research on the color and design of the visual aspects has been conducted passively. Therefore, This study will attribute designers to come up with creative pattern design and secure many consumers. Above all, we hope that the expansion of material representations will help designers break away from today's stereotypes of the characteristics of the materials and emotional expression.

• Science of Emotion and Sensibility
• /
• v.14 no.3
• /
• pp.385-394
• /
• 2011

The purpose of this research is to compare and analyze visual images between the Real garment and the 3D garment simulation with the various fabrics of flare skirts and to analyze the correlation between mechanical properties and visual images. The picture images (printed on paper) of the Real garment and the 3D garment simulation of experimental flare skirts were shown to the evaluation group of women in their 20s majoring in clothing and textiles, and were evaluated by questionnaires with 32 adjectives. SPSS Version 12.0 statistics program was utilized to analyze data. Factor analysis, One Way ANOVA, T-test and Duncan test were used to investigate visual effect of the Real garment and the 3D garment simulation. As the result of conducting factor analysis on the visual appearance, the images were driven with five factors: 'drapeability', 'attractive', 'body compensation', 'bulkiness', 'activeness'. Visual images were significantly related with mechanical properties of various fabrics, and the visual images between 3D garment simulations and real garment differed with various fabrics and their mechanical properties. Visual images of silk and polyester group, cotton, linen and wool group were significantly related with weight and thickness of kinds of fabrics.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.560-565
• /
• 2008

Plantae of the natural material has been broadly used on cloth dyeing by it's specific properties such as eco-friendly and innoxious. However dyeing with natural material on synthetic fiber is nearly impossible due to poor affinity between natural material and synthetic fiber. The method which is binding with micro-capsulized natural material to cloth, used in this study, has low change on quality by external influence. Also this method has high ability in spray effect by broken capsule which comes to pressure and friction when the treated cloth was dressed. And this method is applicable widely from natural fiber to synthetic fiber. The purpose of this study is to develop the multi-functional synthetic material with micro-capsulized Ginseng on PET. Moreover, it was driven by comparison of colormetric properties and fastness between regular dip-dyeing method and binding with micro-capsulized material method. Dyeability showed a little bit low exhaustion but the PET treated by micro-capsule was more or less better than the dip dyed PET. Through the SEM(Scanning Electron Microscope) of PET treated by micro-capsule, it has good residence of capsules even after 5 or 10 times washing. Wash and light fastness were revealed some different grades by each condition but showed high level, in most and the micro-capsulized PET was more improver than regular dip dyed PET.

• Fashion & Textile Research Journal
• /
• v.16 no.1
• /
• pp.128-136
• /
• 2014

The virtual try-on technologies of the current level have limitations with material expression as well as some difficulties with commercialization. There are differences in simulation results and subjective evaluations perceived by consumers according to the types and physical characteristics of materials used in virtual try-on simulations. This study were to analyze the exterior clothing shapes and visual images from 3D virtual try-on simulations with materials whose drapability was differentiated and then test the accuracy of the expression of the drapability of the materials. The study carried out 3D virtual try-on simulations by selecting flared skirts as an item to best express differences in drapability along with five materials of different physical properties and offered some basic data for greater utilization of virtual try-on simulations by comparing and analyzing them with the exterior shapes and visual images of actual flared skirts. The analysis results of hemline shapes between actual and virtual try-on according to the types of materials showed no match among the quantitative items of exterior shapes factors. There were no significant differences in the visual images except for "soft" according to the simulation methods, which means that the items can serve as part of a scale for visual image comparison. It is necessary to reflect quantitative numbers regarding "drapability" proposed in the study simulation software and to continue to build a systematic database for virtual simulations by investigating and testing various materials.

• Journal of the Korean Institute of Educational Facilities
• /
• v.27 no.3
• /
• pp.3-14
• /
• 2020

The purpose of this study is to discuss the planning direction of educational spaces to support children's healthy and creative learning based on bio_philic theory. This study analyzed the characteristics of the application of biophilic patterns in children's education space through case analysis. The conclusion of this study is summarized as follows. As a result of the analysis of children's classroom space, the pattern of 'A(Visual connection with nature), F(Dynamic & Diffuse Light), K(Prospect)' shows high application rate, but the pattern of 'C(Non-Rhythmic Sensory Stimuli), G(Connection with Natural Systems), I(Material Connection with Nature)' shows low application rate. In particular, there is a lack of connection with patterns such as hearing, smell, touch, taste stimulation and water experience, and curiosity through exploration of nature about 'B(Non-visual connection with nature), E(Presence of Water), N(Risk/Peril)' changes in nature and ecosystem. In the corridor and rest space, the pattern of 'A(Visual connection with nature), D(Thermal & Airflow Variability), F(Dynamic & Diffuse Light), G(Connection with Natural Systems), K(Prospect)' shows high application rate, but 'B(Non-visual connection with nature)' shows low application rate. In addition, the application of patterns related to the stimulation of curiosity through direct exploration of nature and the exploration of the patterns of 'E(Presence of Water), N(Risk/Peril)' is insufficient. Therefore, in the case of classroom spaces, the active use of nature as it is should be considered within the scope that does not cause visual confusion, and it should provide an area that can be experienced through the five senses. And corridors and rest spaces should be designed to introduce more active natural elements as spaces to recover stress caused by learning. In other words, the characteristics of children's education facilities need to be connected between classroom space, corridor, rest space and external space. This study is meaningful in that it analyzes and derives the application characteristics of 'biophilic design' which affects the 'Attention Restoration' of children's educational spaces through foreign cases.

• Archives of design research
• /
• v.12 no.2
• /
• pp.89-95
• /
• 1999

Carlo H. Sequin, a computer scientist, became to know a sculpture of subtle space construction which was created by Brent Collins, a sculptor, and introduced it as 'Visual Mathematics' in a journal. Sequin who was able to deduce a basic logic of the construction, has developed a software which can be used for virtual modeling merely by substituting simple numerical values using a computer and supplied it to Collins. The present author who was exposed to their collaboration works through series of their papers published in the journal, Leonardo, introduces the Collins' sculptures and the author's modeling procedures of animation works both of which show many common things in visual characteristics and modeling expansion method. The author investigates the mathematical characteristics which is used as a basic motive of modeling and then supplied as a principal visual characteristics of a material. 'Modeling Development by Principle Expansion,' in which the expansion is developed on the base of space twist as for Collins whereas the space section as for the present author, is introduced in this study. With the same stream of the mutual reaction in 'arts, sciences and technology' which has been stressed with the development of sciences and technology, this modeling technology is suggested as a research theme which has a possiblity of various applications.

• Journal of Korean language education
• /
• v.29 no.3
• /
• pp.325-344
• /
• 2018

The purpose of this study is to summarize PWIM (Picture Words Inductive Model) which is one of learner-centered vocabulary teaching-learning models, and suggest ways to implement them in Korean language education. The pictures that are used in the Korean language education field help visualize the specific shape, color, and texture of the vocabulary that is the learning target; thus, helping beginner learners to recognize the meaning of the sound. Visual material stimulates the intrinsic schema of the learner and not only becomes a 'bridge' connecting the mother tongue and the Korean language, but also reduces difficulty in learning a foreign language because of the ambiguity between meaning and sound in Korean and all languages. PWIM shows commonality with existing learning methods in that it uses visual materials. However, in the past, the teacher-centered learning method has only imitated the teacher because the teacher showed a piece-wise, out-of-life photograph and taught the word. PWIM is a learner-centered learning method that stimulates learners to find vocabulary on their own by presenting visual information reflecting the context. In this paper, PWIM is more suitable for beginner learners who are learning specific concrete vocabulary such as personal identity (mainly objects), residence and environment, daily life, shopping, health, climate, and traffic. The purpose of this study was to develop a method of using PWIM suitable for Korean language learners and teaching procedures. The researchers rearranged the previous research into three steps: brainstorming and word organization, generalization of semantic and morphological rules of extracted words, and application of words. In the case of PWIM, you can go through all three steps at once. Otherwise, it is possible to divide the three steps of PWIM and teach at different times. It is expected that teachers and learners using the PWIM teaching-learning method, which uses realistic visual materials, will enable making an effective class together.