• 환경영향평가
• /
• 제22권4호
• /
• pp.381-387
• /
• 2013

In order to improve the environmental vibration, it is necessary to method for not only reduce the vibration source, but also control the vibration path. In this study, we used borebole for estimate the vibration reduction. And also, we analyzed displacement and vibration velocity caused by the position of borehole as well as the condition of borehole in ground structure. Visual FEA(Finite Element Analysis) program was used in this numerical analysis. The results are as follows : The displacement magnitude and X, Y direction displacement were represented to different results due to the condition and position of borehole, and were represented to the lowest values when the position of borehole is the most close condition from the vibration source. And also, the vibration velocity was decreased as using borebole in ground structure. The isolation efficiency of the vibration was calculated to maximum 18.40% when borehole was established to the most close position from the vibration source and the receive point.

• 한국지반신소재학회논문집
• /
• 제5권3호
• /
• pp.45-52
• /
• 2006

보강토옹벽 구조물의 안정평가 및 관리는 변위 침하계측기 등에 의해 이루어지고 있고 Total Station 등을 이용한 측량장비들도 계측에 이용되고 있다. 그러나 이러한 계측은 대부분 국부적이며, 붕괴가 예상되는 경우에만 이루어지고 있다. 이와 같은 기존의 계측시스템은 계측기의 내구성 및 관리 측면에서 많은 경제적 손실이 야기되고 있어 측정값의 신뢰성에도 많은 문제가 발생하고 있다. 따라서 본 연구에서는 기존 시스템의 단점을 극복하기 위해 개발된 수치사진영상을 이용한 계측시스템을 실내시험을 통하여 보강토옹벽의 변위계측에 적용 실시하였다. 시험결과, 옹벽의 벽면변위계측이나 변형 및 균열 등의 계측을 위한 계측시스템으로 활용이 가능할 것으로 판단되었다.

• 한국안광학회지
• /
• 제15권3호
• /
• pp.241-245
• /
• 2010

목적: 시각적 공간감각인 물체의 거리감과 움직임에 대하여 시력측정이 가능한 격자시표를 제안하고자 한다. 방법: 주기성을 갖는 한 쌍의 격자를 제작하여 이를 렌즈로 결상하고 그 상을 시력표에 투영하여 도형모양의 시표를 형성한다. 이 격자를 회전 또는 선형 이동하여 도형모양의 시표에 거리감과 움직임을 주는 형식으로 피검사자가 공간감각을 인지할 때 격자의 위치변위를 알 수 있도록 한다. 결과: 격자를 회전하여 거리감의 정도를 나타내는 측정값은 이론식에 의한 값과 비교하여 평균 2.98%의 오차를 나타냈고 선형이동에 따른 움직임을 인식하는 결과는 격자가 $\theta=15^{\circ}$ 회전된 상태에서 평균 1.73%의 오차를 나타냈다. 결론: 본 실험에서 제시한 무아레 무늬의 시표는 시각적 공간감각에서 피검사자의 거리감과 물체의 움직임을 측정하는 시표로서 그 활용이 가능하다.

• Journal of Oral Medicine and Pain
• /
• 제21권1호
• /
• pp.67-78
• /
• 1996

This study was performed to compare the TMJ sounds by means of vibration-related items by Sonopak such as integral, high integral, above 300/(0-300) ratio, peak amplitude, peak frequency and median frequency before and after occlusa1 splint therapy as well as counselling, physical modalities. For this study 22 patients with craniomandibular disorders (CMDs) were selected and examined by routine diagnostic procedure for CMDs including Transcranial and Panoramic radiographs and were classified into 3 CMDs subgroups : disc displacement with reduction, disc displacement without reduction, and degenerative joint disease. Visual analogue scale (VAS) about joint sound was recorded during treatment period and VAS treatment index (VAS Ti) was calculated from the VAS data and treatment duration. The author evaluated and compared treatment results by several parmeters such as symptom duration, timing of joint sound, parafunctional habits, trauma, and diagnostic classification. The obtained results were as follows : 1. Before the treatment, the highest value of peak amplitude was observed in disc displacement with reduction group and value of median frequency was highest in degenerative joint disease group. In addition the highest values of peak frequency and ratio ware observed in degenerative joint disease group, though they were not significant. Furthermore the lowest value of high integral was observed in disc displacement without reduction group and though it was not significant, value of integral was lowest in that group. 2. Among 3CMDs subgroups disc displacement with reduction group showed the significantly decreased value of high integral and degenerative joint disease group had the significantly decreased value of integral after conservative treatment including occlusal splint therapy. Conclusively conservative treatment including occlusal splint therapy vay be effective in the treatment of CMDs including TMJ sound. 3. Fair prognosis for conservative treatment was observed in acute group under 6 months than chronic group, 6 months over in symptom duration but there was no statistical difference. The result for conservative treatment was observed slightly poor in subjects with bruxism, clenching, unilateral chewing habit and trauma history but there were no statistical differences.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2373-2380
• /
• 1993

This paper addresses the design procedure and testing result of a servo driven pan/tilt device which is capable of tracking arbitrary movement of a specified target object. In order to achieve real-time acquisition of feedback signal, a 2 degree-of freedom non-contact type displacement follower has been employed in stead of vision camera. The performance of the designed system is tested for different target velocities and control gains. The test result shows the satisfactory performance to be adopted as an effective tool for visual transfer in the context of teleoperation.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.863-869
• /
• 2013

In this paper, we compared and analyzed for safety 1.2m rectangular anchor block and arch-type root anchor block. First, numerical analysis was performed three-dimensional nonlinear method by numerical model test using finite element analysis program "Visual FEA". Then, measure displacement of the surface of the earth after construct each anchor block at 14M electric pole and increase loads through field verification tests for safety evaluation.

• 제어로봇시스템학회논문지
• /
• 제8권11호
• /
• pp.935-940
• /
• 2002

For robot navigation and visual reconstruction, structure from motion (SFM) is an active issue in computer vision community and its properties arc also becoming well understood. In this paper, when using stereo image sequence and direct method as a tool for SFM, we present a new method for overcoming bas-relief ambiguity. We first show that the direct methods, based on optical flow constraint equation, are also intrinsically exposed to such ambiguity although they introduce robust methods. Therefore, regarding the motion and depth estimation by the robust and direct method as approximated ones. we suggest a method that refines both stereo displacement and motion displacement with sub-pixel accuracy, which is the central process f3r improving its ambiguity. Experiments with real image sequences have been executed and we show that the proposed algorithm has improved the estimation accuracy.

• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.249-256
• /
• 2007

This paper presents a new circuit topology and its digital control scheme for a half-bridge resonant inverter. As the proposed half-bridge inverter can be operated in load-freewheeling modes, the pulse-width modulation (PWM) method can be used for the output power control. The proposed half-bridge inverter is based on the resonant frequency-tracking algorithm with the goal of maintaining the unity of the output displacement factor of the load impedance even in varying conditions. In this paper, the operation principle, electrical characteristics, and detailed digital control scheme of the proposed half-bridge resonant inverter are described. The experimental results of the prototype experimental setup to verify the validity of the proposed half-bridge inverter are presented and discussed.

• Journal of information and communication convergence engineering
• /
• 제20권1호
• /
• pp.65-72
• /
• 2022

With the mark of the fourth industrial revolution, the smart factory is evolving into a new future manufacturing plant. As a human-machine-interactive tool, augmented reality (AR) helps workers acquire the proficiency needed in smart factories. The valuable data displayed on the AR device must be delivered intuitively to users. Current AR applications used in smart factories lack user movement calibration, and visual fiducial markers for position correction are detected only nearby. This paper demonstrates a marker-based object detection using perspective projection to adjust augmented content while maintaining the user's original perspective with displacement. A new angle, location, and scaling values for the AR content can be calculated by comparing equivalent marker positions in two images. Two experiments were conducted to verify the implementation of the algorithm and its practicality in the smart factory. The markers were well-detected in both experiments, and the applicability in smart factories was verified by presenting appropriate displacement values for AR contents according to various movements.

• Journal of Oral Medicine and Pain
• /
• 제43권4호
• /
• pp.112-117
• /
• 2018

Purpose: The aim of this study is to compare the short-term effectiveness of hard and soft stabilizing appliances (H-A and S-A) in treating patients with acute temporomandibular joint (TMJ) disc displacement without reduction (DDwoR). Methods: Eighty one patients diagnosed as acute TMJ DDwoR at oral medicine of Chosun University Dental Hospital from November 2016 to September 2017 were included in this study. The subjects were divided into three groups: The control group (34 patients treated without occlusal appliance), the H-A group (31 patients treated with H-A) and the S-A group (16 patients treated with S-A). The pain intensity using Visual Analog Scale and maximum mouth opening (MMO) were evaluated every week for 8 weeks. Results: The improvement of the pain intensity and MMO in the H-A group and the S-A group compared with the control group were noted (p<0.05). Conclusions: This study suggests that hard and S-As may be equally useful in treating patients with TMJ DDwoR. S-A could be recommended to reduce the symptoms of TMJ DDwoR in short period.