• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.3
• /
• pp.311-319
• /
• 2012

Purpose: One of the critical aspects on dispensing glasses is to match the center of pupils to the optical center of lenses as the mismatched glasses are able to induce uncomfortable effects called prism which has been known to induce phoria, a main cause for asthenopia in many cases. Therefore, we investigated the induced prism occurred by mismatching centers between the center of pupils and the optical center of lenses. Methods: In this study, total 103 subjects were examined whether the center of pupils and the optical center of lenses are matched in horizontal and vertical directions, and then, the data was categorized into 4 groups based on the structural components of glasses. Total amount of prism was compared to show the effect of the glasses frame on the prism induction, and the value of measured prism was compared with the German RAL-RG 915 regulations. Results: The results in respect to the horizontal component showed that the induced prism was not found in 10.7% of total subjects. 73.8% of total subjects were influenced by induced prism, the range of prism was in a tolerance level. However, the 15.5% of total subjects seemed to be influenced by prism which is out of the criterion of tolerance. In case of vertical component, 23.3% of total subjects showed no effects of prism while early adopting glasses, 54.4% of total subjects showed a little prism effect within the criterion of tolerance, and 22.3% of total subjects showed the prism effect out of the tolerance range. This data indicates that group A and B that are less likely adjustable by fitting induce more prism than group C and D in horizontal and vertical components. Conclusions: In higher refractive error condition, it was found that aligning the optical center of lenses with the center of pupils by pre-fitting of glasses frame minimized prism induction in horizontal and vertical components, which ameliorates ocular fatigue. Therefore, appropriate optometric dispensing through fitting by opticians and precise design about monocular PD and monocular Oh are necessary to improve visual perception.

• Conservation Science in Museum
• /
• v.30
• /
• pp.23-46
• /
• 2023

The Jija Chongtong Gun, owned by Seokdang Museum of Dong-A University, is a tubedstyle heavy weapon of the battlefield in the mid-Joseon Dynasty and is the second largest firearm after Cheonja Chongtong. The original surface color of the Jija Chongtong Gun was obscured by foreign substances and therefore it was judged that its condition requires the conservation treatment. For stable conservation treatment, gamma ray and X-ray non-destructive transmission surveys was conducted to determine the internal structure and conservation condition. And the component analysis on the material components and surface contaminants of Jija Chongtong Gun was conducted by utilizing the p-XRF component analysis, SEM-EDS component analysis, and XRD analysis. As a result of the gamma-ray and X-ray non-destructive transmission investigation, a large amount of air bubbles was observed inside Jija Chongtong Gun, and the part that appeared to be a chaplet by visual observation was not identified. As a result of gamma-ray and p-XRF component analysis, it was confirmed that Jija Chongtong Gun was bronze made of copper (Cu), tin (Sn), and lead (Pb) alloy. As a result of surface analysis of foreign substances using SEM-EDS, it was confirmed that the main components of white foreign substances were calcium (Ca), sulfur (S), and titanium (Ti). Titanium was presumed to be titanium dioxide (TiO₂), the main component of white correction fluid. The red foreign substance was confirmed to contain barium (Ba) as its main ingredient, and was presumed to be barium sulfate (BaSO₄), an extender pigment in paint. White and red contaminants, mainly composed of titanium and barium, are presumed to have been deposited on the surface in recent years. The yellow foreign substances were confirmed to be aluminum (Al) and silicon (Si), and were presumed to have originated from soil components. As a result of SEM-EDS and XRD component analysis, the white foreign substance was confirmed to be gypsum (CaS). Based on the results of component analysis, surface impurities were removed, stabilization treatment, and strengthening treatment were performed. During the conservation process, unknown inscriptions Woo (右), Byeong (兵), Sang (上), and Yi (二) were discovered through a portable microscope and precise 3D scanning. In addition, the carving method, depth, and width of the inscription were measured. Woo Byeong Sang is located above Happo Fortress in Changwon, and Yi can be identified as the second hill.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.278-287
• /
• 2013

Modern information technologies continue to provide industries with new and improved methods. With the rapid development of Machine to Machine (M2M) communication, a smart container supply chain management is formed based on high performance sensors, computer vision, Global Positioning System (GPS) satellites, and Globle System for Mobile (GSM) communication. Existing supply chain management has limitation to real time container tracking. This paper focuses on the studies and implementation of real time container chain management with the development of the container identification system and automatic alert system for interrupts and for normal periodical alerts. The concept and methods of smart container modeling are introduced together with the structure explained prior to the implementation of smart container tracking alert system. Firstly, the paper introduces the container code identification and recognition algorithm implemented in visual studio 2010 with Opencv (computer vision library) and Tesseract (OCR engine) for real time operation. Secondly it discusses the current automatic alert system provided for real time container tracking and the limitations of those systems. Finally the paper summarizes the challenges and the possibilities for the future work for real time container tracking solutions with the ubiquitous mobile and satellite network together with the high performance sensors and computer vision. All of those components combine to provide an excellent delivery of supply chain management with outstanding operation and security.

• Journal of Broadcast Engineering
• /
• v.23 no.1
• /
• pp.45-52
• /
• 2018

The virtual reality (VR) cartoon is a format of VR contents that leverage the characteristics of webtoons that provides the simple story line and graphical storytelling tools to strategically surmount limitations of VR contents design. The VR cartoon enables people to experience the imaginary three-dimensional space in the webtoon as a real space by the transformation of webtoon contents through VR prototyping. The VR cartoon successfully presents focused environment where people can readily pay attention to the contents without notable motion sickness. People have been familiar with the storytelling strategy in the context of published cartoons and webtoons, likely we've understood the narrative of a movie through the continuous scenes projected in the screen. Indeed, it has been recognized as a popular toolset of communication, where visual images are sequentially delivered by replacing multiple planar spaces to tell a story narrative. While there are discrete panels with the time and space resolution in the graphical cartoons, people can distill a commit closure based on their past experiences. This is a typical "grammar" of the cartoon, which can be extrapolated to the VR cartoon that provides a seminal storytelling strategy. In this article, we review how the storytelling strategy in webtoons has been transformed into that in VR cartoons, and analyze the key components of VR cartoons. We envision that our research can potentially create keystones to produce variety of new VR contents by reflecting various narrative media including cartoon as a 'sequential art'.

• Korean Journal of Food Science and Technology
• /
• v.43 no.1
• /
• pp.51-57
• /
• 2011

From the total methanolic extract of Gardenia jasminoides (Rubiaceae), various antioxidative characteristics were identified in terms of nitrite scavenging ability, 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulphonic acid) (ABTS) radical cation inhibition, superoxide dismutase (SOD)-like activity, and elongation effect of lipid peroxidation using Rancimat. After successive partitioning with n-hexane, chloroform, n-butanol, and water, potent nitrite scavenging abilities were shown in the n-butanol fraction and water fraction, and $IC_{50}$ values were 183 ppm and 194 ppm, respectively. As for ABTS radical cation inhibition, the chloroform fraction was most potent and its $IC_{50}$ was 159 ppm. SOD-like activity was slightly low in all of the fractions. The elongation effect of lipid peroxidation also increased dose-dependently and the antioxidative index (AI) of the total methanolic extract was 2.93 in 1000 ppm, which was more effective than 1.66 of butylated hydroxy anisol in the same concentration. The compounds I and II were isolated through silica gel column chromatography of the active fractions, and identified as geniposide and crocin, respectively, by $^1H-NMR$ spectral data. The $IC_{50}$ values for the nitrite scavenging abilities of geniposide and crocin were 940 ppm and 77 ppm, respectively. In ABTS radical cation inhibition, the $IC_{50}$ values of geniposide and crocin were 684 ppm and 549 ppm, respectively. And the $EC_{50}$ value for SOD-like activity of crocin was 259 ppm, which was much smaller than 453 ppm by the positive control, chlorogenic acid. The $EC_{50}$ value of geniposide could not be identified.

• Tunnel and Underground Space
• /
• v.15 no.1 s.54
• /
• pp.28-38
• /
• 2005

According to the recent development of measurement system utilizing one or a set of boreholes, visualization of the explored underground became to be a major issue. It induced even the introduction of monitoring apparatuses on the borehole wall with multi-function tool, but the usage of these was often limited by where is unfavorable rock condition and a few of engineers can approach. And so, a portable type of borehole camera with only the essential function has been investigated and a few of commercial models about this is recently being applied into the field condition. This paper was based on the monitoring results obtained using a commercial model by Dr. Nakagawa. Discontinuities in rock mass were the topic for the visualization, and it was studied how can visualize their three dimensional distribution and what a numerical formulation is needed and how to understand the visualization result. The numerical formulation was based on the geometric correlation between the dip direction / dip of discontinuous plane and the trend / plunge of borehole, a set of the equation of a plane was induced. As field application of this into two places, it is found that the above visualization methodology will be especially an useful geotechlical tool for analyzing the local distribution of discontinuities.

• Korean Journal of Cognitive Science
• /
• v.29 no.1
• /
• pp.39-59
• /
• 2018

To elucidate the effect of working memory (WM) load on negative facial emotion processing, we examined ERP components (P1 and N170) elicited by fearful and neutral expressions each of which was presented during 0-back (low-WM load) or 2-back (high-WM load) tasks. During N-back tasks, visual objects were presented one by one as targets and each of facial expressions was presented as a passively observed stimulus during intervals between targets. Behavioral results showed more accurate and fast responses at low-WM load condition compared to high-WM load condition. Analysis of mean amplitudes of P1 on the occipital region showed significant WM load effect (high-WM load > low-WM load) but showed nonsignificant facial emotion effect. Analysis of mean amplitudes of N170 on the posterior occipito-temporal region showed significant overall facial emotion effect (fearful > neutral), but, in detail, significant facial emotion effect was observed only at low-WM load condition on the left hemisphere, but was observed at high-WM load condition as well as low-WM load condition on the right hemisphere. To summarize, facial emotion effect observed by N170 amplitudes was modulated by WM load only on the left hemisphere. These results show that early emotional processing of negative facial expression could be eliminated or reduced by high load of WM on the left hemisphere, but could not be eliminated by high load on the right hemisphere, and suggest right hemispheric lateralization of negative facial emotion processing.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.200-206
• /
• 1996

Experiment was conducted to get the information about physico-chemical properties of flue-cured tobacco on the degree of maturity cultivated in paddy-upland rotated field, and compared to upland ones. For the samples of this experiment, 3~4 leaves at each stalk position were harvested from the bottom of plants. Physico-chemical properties of cured leaves were determined from the samples collected at weekly intervals, and of obtained from 4 stalk positions. For the degree of maturity, harvested leaves were separated with visual characters into four classes such as immature, mature, ripe, and mellow. Regardless of stalk position, the order of shrinkage rate with length and width of leaves was mellow> immature> ripe> mature, and ripe leaves from paddy field showed higher shrinkage rate than those of upland. Nicotine and total nitrogen contents were decreased with the degree of maturity while reducing sugar content were showed a reverse tendency. Ripe leaves from paddy field had lower reducing sugar contents, comparing with upland tobacco. Filling capacity of cured leaves from paddy field was decreased with degree of maturity, but there was no difference between upland and paddy tobacco. Shatter index was increased in the oeder of immature > mellow > mature > ripe. Chemical components of cigarette smoke from paddy field tobacco were little higher in $CO_2$ total particulate matter and tar contents, while combustibility was little lower than that of upland tobacco. It was also evaluated that paddy field tobacco was unfavorable for the non-volatile organic and higher fatty acids contents comparing with upland tobacco.

• Cartoon and Animation Studies
• /
• s.34
• /
• pp.81-104
• /
• 2014

Self-reflexivity means consciousness turning back on itself and breaks with art as illusionism and exposes their own factitiousness as textual construct. Self-reflexivity in media deals with the media's condition and process itself and tends to pull viewers out of the reality represented on screen by reminding them that is a media's construction or illusion on the screen. Representation aesthetics has been recognized with an essential theory of the art since Ancient Greek, but it has encountered crisis with the invention of the photography and the cinema in the early 1900s. The supreme transparency of the new media induced a new perspective for the representation aesthetics, which had dominated the art world. The art derived from the representation stood on the crossroad of changing direction. Modernism aesthetics wanted to search for the self-referentiality in order to the replace the past principal. This essay focuses on self-reflexivity in animation and their methodology. First, the change of representation aesthetics in visual arts will be discussed. Second, animations exposing their process of production and components will be analyzed, and lastly, intertextuality in animation will be dealt. I hope to provide the vision of the expanded animation media with this study.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.3
• /
• pp.295-303
• /
• 2014

Purpose: This study aims to observe bleaching resulted from multipurpose contact lens solutions used to manage lenses with the subjects of colored contact lenses being distributed in Korea. Methods: The lenses have been worn for six months, and their refraction is 0.00D. Three types of colored contact lenses of which margin has been colored with a different manufacturing method have been adopted (type 1: pigment application method, type 2: chemical bonding process, type 3: sandwich method), and multipurpose solutions used were two types containing different components. Each of the colored contact lenses was stored in the multipurpose solutions for 20 days and went through vortexing for 15 seconds per day. Their fluorescence absorbance, surface roughness, brightness index, and color coordinate index were measured before and after the vortexing to see the degree of bleaching. Results: In the two types of multipurpose solutions, every type of the color contact lenses showed no statistically significant difference in their fluorescence absorbance value before and after the vortexing. Regarding surface image, the front surface of the lenses was smooth in every type, and about the back surface, type 3 indicated less protrusion than type 1 and 2. About the difference of color on the lens surface before and after the vortexing, type 3 showed significantly less difference than type 1 and 2; however, all fell into the permissible error. Conclusions: About the bleaching of colored contact lenses resulted from multipurpose solutions for soft contact lenses, there was no difference observed in terms of fluorescence absorbance and color. According to the methods of manufacturing dyes, however, there was difference in the protrusion of the posterior surface image.