• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.5
• /
• pp.520-525
• /
• 2003

Fast Breeder Test Reactor (FBTR) is a 40MW (thermal) / 13.2MW (electrical), Plutonium - Uranium mixed carbide fuelled, sodium cooled, loop type nuclear reactor operating at Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam. Its main aim is to generate experience in operation of fast reactors and sodium systems and to serve as an irradiation facility for development of fuels and structural materials fur fast reactors. Nuclear reactors pose difficulties to the NDT techniques used to monitor the conditions of the internal components. Sodium cooled fast breeder reactors have their own typical difficulties in using the NDT techniques. These are due to the need for operation in aggressive environment of nuclear radiation and sodium (molten/vapour), as well as the need to maintain leak tightness of a very high order during all states of reactor operation and shutdown for fuel handling, maintenance and remote inspection. This paper discusses the following NDT techniques, which have been successfully used for the past 15 years in FBTR: (i) Periscope and Projector, (ii) Core Co-ordinate Measuring Device and, (iii) Optical fiberscope. The inspection using these techniques have given confidence for further reactor operation at high power by giving useful data on the conditions of the components inside the reactor vessel.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.2
• /
• pp.122-129
• /
• 2015

In this study, we propose a low voltage stress and cost-effective light emitting diode (LED) driver capable of multi-channel current balancing. Conventional LED drivers require as many boost converters as the number of LED channels, whereas the proposed LED driver requires only one buck converter and several balancing capacitors instead of several expensive boost converters. Additionally, while the components of the boost converter have high voltage stress and depend on the LED driving voltage, components of the proposed driver have about one-half of the voltage stress across all components. The proposed driver exhibits high reliability and cost effectiveness because it only uses few DC blocking capacitors with no additional active devices to balance the current of multi-channel LEDs. The proposed driver exhibits high reliability and cost effectiveness. The validity of the proposed driver is confirmed through a theoretical analysis. An explanation of the design considerations and experimental results were obtained using a prototype applicable to a 46" LED-TV.

• Journal of the Korean Society for information Management
• /
• v.22 no.2 s.56
• /
• pp.103-124
• /
• 2005

This study analyzed the web style guide of five foreign university library web sites and extracted the web site components of main university libraries in ten domestic areas and then drew the common factors from the components. This study also found out the unity and rule in the general design trends of university library web sites. In order to do this, the results for the usability and accessibility of university library web sites were applied to this study. And being based on it. this study presents the web style guide components of the university libraries which are the factors to endow the web site with the consistently visual identity.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.625-630
• /
• 2016

Recently, various types of image contents are being produced, and interest in copyright protection technology is increasing. In this paper, we propose an image encryption technology for color images. This technique divides the image into RGB color components and then performs quad-tree decomposition based on the edge of image. After the quad-tree partitioning, encryption is performed on the selected blocks. Encryption is performed on color components to measure encryption efficiency, and encryption efficiency is measured even after reconstitution into a color image. The encryption efficiency uses a visual measurement method and an objective image quality evaluation method. The PSNR values were measured as 7~10 dB for color difference components and 16~19 dB for color images. The proposed image encryption technology will be used to protect copyright of various digital image contents in the future.

• International Journal of Quality Innovation
• /
• v.6 no.3
• /
• pp.204-215
• /
• 2005

This paper explores innovative manufacturing processes, which can be used to manufacture the national musical instrument of Trinidad and Tobago, the Musical Steel Drum or Steel Pan. The main manufacturing process used today is the manual hand-forming technique. In order to achieve more consistent and deeper formed components while maintaining the high quality of the instrument, it is proposed that the Marforming process and the Flow-forming process, an adaptation of the Spinforming process, be used more frequently in the future to replace the traditional Hand-forming method. In the traditional Spinforming technique material is pushed from the outer circumference of the metal disc to the center in progressive passes of the former. This results in a thinning of the outer region of the formed component with thickening of the center, however the opposite is required for the musical steel drum and by adapting the process the required strain distributions were achieved. Evaluation took the form of strain analyses of pre-formed steel drums and visual inspection of the quality of the surface finish. It was found that the Marformed components had the smallest range of strain values while the Spinformed components had the largest range.

• Journal of Information Processing Systems
• /
• v.9 no.3
• /
• pp.405-424
• /
• 2013

This research paper proposes a secured, robust approach of information security using steganography. It presents two component based LSB (Least Significant Bit) steganography methods for embedding secret data in the least significant bits of blue components and partial green components of random pixel locations in the edges of images. An adaptive LSB based steganography is proposed for embedding data based on the data available in MSB's (Most Significant Bits) of red, green, and blue components of randomly selected pixels across smooth areas. A hybrid feature detection filter is also proposed that performs better to predict edge areas even in noisy conditions. AES (Advanced Encryption Standard) and random pixel embedding is incorporated to provide two-tier security. The experimental results of the proposed approach are better in terms of PSNR and capacity. The comparison analysis of output results with other existing techniques is giving the proposed approach an edge over others. It has been thoroughly tested for various steganalysis attacks like visual analysis, histogram analysis, chi-square, and RS analysis and could sustain all these attacks very well.

• Current Photovoltaic Research
• /
• v.2 no.2
• /
• pp.63-68
• /
• 2014

In recent years, discoloration defects, called as snail trail, have been observed at many crystalline photovoltaic modules after a period of time ranging from several months to several years after initial installation. It has been reported that this phenomenon doesn't impact on the performance of photovoltaic modules, but it can be detected through simple visual inspection. The origin and detailed mechanism for the formation have not been identified. In this study, non-destructive analysis by Raman spectroscopy has been carried out to investigate the origin of this phenomenon. In parallel, destructive analysis by scanning electron microscopt and transmission electron microscopy was also performed in order to confirm the results from non-destructive method. Through the extensive analysis, it was found that the main cause for discoloration is the formations of $Ag_2CO_3$ and $AgC_2H_3O_2$. Detailed mechanism for the formation of these particles was indentified through systematic studies.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.2
• /
• pp.47-61
• /
• 2013

A concession business at Incheon Int'l airport has achieved a huge success since its grand opening of 2001. However the duty-free market became matured due to downtown duty free stores and on-line stores. Thus this paper tried to research and suggest strategic planning of VMD at Incheon airport's duty-free after analyzing the relationship among the components of duty-free store's VMD, brand awareness, brand image and customer's loyalty. Components of VMD are constructed in harmony, attractiveness, trendiness and Trust, which are independent variables. In addition, brand awareness and brand image are chosen as control variables. Customer loyalty is also designated as a dependant variable. Focusing those variables, this paper tried to find out the effect of VMD components to brand and consumer loyalty. According to the research result, it is proven attractiveness and harmony have a significant positive impact on brand awareness and brand image. It is also found out brand awareness and image have a positive impact on passenger's loyalty on duty-free stores at Incheon airport.

• Journal of the Society of Disaster Information
• /
• v.16 no.2
• /
• pp.374-382
• /
• 2020

Purpose: Recently, structural defects in old safety management facilities have led to the collapse of buildings and facilities. The purpose of this study is to develop guidelines for the installation of regular monitoring systems that determine the optimal sensor location for monitoring exhibition space building sensors equipped with visual elements in order to analyze the risk signs of exhibition space buildings and develop measurement technology. Method: The components, installation locations, alarm criteria, and management measures of the instrument are presented. Result: A measure was proposed to determine the location of sensors, secure signal processing technology for analysis by having unified visual perception, and configure optimal 'risk sign detection' based on sensor monitoring through test-bed operation. Conclusion: The results of this study can be prepared against the disasters that may arise from the collapse of exhibition buildings, and contribute to strengthening safety management capabilities.

• Journal of the Korean Society of School Health
• /
• v.1 no.1
• /
• pp.103-113
• /
• 1988

The analysis of the visual impairment and refractive errors among 4,004 school children in Seoul in 1986 with ancilliary questionnaire on various socio-environmental and visual factors was conducted. The number of the student with subnormal vision (0.7 or less) was 1,552 (38,8 %), and the rate of subnormal vision was increased with the higher grading of the school classes. Rate of myopes among the 1,552 students vision 0.7 or less consists of 52 % in primary school, 83.5 % in middle school, and 94 % in high school, and they were increased with the higher grading of the school class. The acutest increase of rates were observed at the stages of 2nd year class of male, and 1st year class of female at the middle school. Among the glasses-wearer of myopic students of vision 0.5 or less, the rate of adequately corrected cases was 42.5 %, whereas the overcorrected in 6.8 %, and undercorrected in 49.3 %. The main reasons of glasses negligence among the non-possessor of glasses with the vision of 0.5 or less were indicated in prominence of numbers of' "no complaints without glasses" (42 %). "unawareness of visual disturbance" (20%), "annoyance with wearing glasses" (13.4%), and "no permission from parents" (11.5 %) rather than the "economical reasons". The amblyopic components were estimated 126 cases (3.2%) in combination of refractive errors. According to the analysis of ancilliary questionnaire, the-conclusion with the statistical significance was that the myopization of the children's eyes appeared susceptible with a number of socio-environmental factors including the eating habits, length of T.V. watching period and distance, reading distance and type of illumination during near work, and school achievement. The possibility of prevention in some extents of progress of the myopia following the improvement of the relevant environmental factors in younger stage of children would be considered as deducible one.