Manufacture of High Quality Musical Steel Drums in Trinidad and Tobago

  • Lewis Winston G. (Department of Mechanical & Manufacturing Engineering, University of the West Indies) ;
  • Ameerali Aaron O. (Department of Mechanical & Manufacturing Engineering, University of the West Indies) ;
  • Pun Kit-Fai (Department of Mechanical & Manufacturing Engineering, University of the West Indies)
  • Published : 2005.12.01

Abstract

This paper explores innovative manufacturing processes, which can be used to manufacture the national musical instrument of Trinidad and Tobago, the Musical Steel Drum or Steel Pan. The main manufacturing process used today is the manual hand-forming technique. In order to achieve more consistent and deeper formed components while maintaining the high quality of the instrument, it is proposed that the Marforming process and the Flow-forming process, an adaptation of the Spinforming process, be used more frequently in the future to replace the traditional Hand-forming method. In the traditional Spinforming technique material is pushed from the outer circumference of the metal disc to the center in progressive passes of the former. This results in a thinning of the outer region of the formed component with thickening of the center, however the opposite is required for the musical steel drum and by adapting the process the required strain distributions were achieved. Evaluation took the form of strain analyses of pre-formed steel drums and visual inspection of the quality of the surface finish. It was found that the Marformed components had the smallest range of strain values while the Spinformed components had the largest range.

Keywords

References

  1. Begeman, L. M.(1963), Manufacturing Processes 5th Edition, John Wiley & Sons Inc
  2. Blake, F. I. R.(1996), Steel Pan - History and Evolution, R.I.K Publishing Company
  3. Doyle, L. E.(1969), Manufacturing Processes and Materials for Engineers, Prentice Hall Inc
  4. Elder, J. D.(1972), From Congo Drum to Steelband, The University of the West Indies, St. Augustine, Trinidad
  5. Ferreyra, E., Maldonado, J. G., Murr, L. E., Pappu, S., Trillo, E. A., Kennedy, C., Posada, M., De Alba, J., Chitre, R., and Russell, D. P.(1999), 'Materials sciences and metallurgy of the Caribbean Steel Drum, Part II: heat treatment, micorsturctures, hardeness profiles and tuning effects,' Journal of Materials Science, Vol. 34, pp. 981-996 https://doi.org/10.1023/A:1004531608912
  6. Fletcher, N. and Rossing, T. (1991), The Physics of Musical Instruments, Springer Verlag Publishing Company
  7. Gay, D.(1998), 'A Brief History of the Steelpan,' The Drama Review, Fall, Vol. 42, No. 3, pp. 64-65
  8. Hansen, U., Rossing, T. D., Mannette, E., and George, K.(1995), 'The Caribbean Steel Pan: Tuning and Mmode Studies,' MRS Bulletin, March, pp. 44-46
  9. Kronman, U.(1995), Steel pan Tuning, Musilmuseet Publishing Company
  10. Lewis, W.(1993), 'Mechanizing the manufacture of the steel pan musical instrument,' The Journal of Professional Engineers of Trinidad and Tobago, Vol. 27, No.2, pp. 35-41
  11. Morris, L. R.(1955), Modem Manufacturing Processes, Prentice Hall Inc
  12. Murr, L. E., Ferreyra, E., Maldonado, J. G., Trillo, E. A., Pappu, S., Kennedy, C.. De Alba, J., Posada, M., Russell, D. P., and White, J. L.(1999), 'Materials sciences and metallurgy of the Caribbean Steel Drum, Part I: fabrication, deformation phenomena and acoustic fundamentals,' Journal of Materials Science, Vol. 34, pp. 967-979 https://doi.org/10.1023/A:1004579524842
  13. Murr, L. E. and White, L.(2000), Metallurgy of the Caribbean Steel Drum, Percussive Notes, February 2000, pp. 57-60
  14. Rossing, T. and Hampton, D. S.(1996), 'Music from oil drums,' Physics Today, March, pp. 24-29