• Restorative Dentistry and Endodontics
• /
• v.38 no.1
• /
• pp.26-30
• /
• 2013

Objectives: The aim of this study was to investigate the relationship between the apical foramen morphology and the length of merged canal at the apex in type II root canal system. Materials and Methods: This study included intact extracted maxillary and mandibular human premolars (n = 20) with fully formed roots without any visible signs of external resorption. The root segments were obtained by removing the crown 1 mm beneath the cementum-enamel junction (CEJ) using a rotary diamond disk. The distance between the file tip and merged point of joining two canals was defined as Lj. The roots were carefully sectioned at 1 mm from the apex by a slow-speed water-cooled diamond saw. All cross sections were examined under the microscope at ${\times}50$ magnification and photographed to estimate the shape of the apical foramen. The longest and the shortest diameter of apical foramen was measured using ImageJ program (1.44p, National Institutes of Health). Correlation coefficient was calculated to identify the link between Lj and the apical foramen shape by Pearson's correlation. Results: The average value of Lj was 3.74 mm. The average of proportion (P), estimated by dividing the longest diameter into the shortest diameter of the apical foramen, was 3.64. This study showed a significant negative correlation between P and Lj (p < 0.05). Conclusions: As Lj gets longer, the apical foramen becomes more ovally shaped. Likewise, as it gets shorter, the apical foramen becomes more flat shaped.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.372-377
• /
• 2007

For more than 2,500 years, surgical teaching has been based on the so called "see one, do one, teach one" paradigm, in which the surgical trainee learns by operating on patients under close supervision of peers and superiors. However, higher demands on the quality of patient care and rising malpractice costs have made it increasingly risky to train on patients. Minimally invasive surgery, in particular, has made it more difficult for an instructor to demonstrate the required manual skills. It has been recognized that, similar to flight simulators for pilots, virtual reality (VR) based surgical simulators promise a safer and more comprehensive way to train manual skills of medical personnel in general and surgeons in particular. One of the major challenges in the development of VR-based surgical trainers is the real-time and realistic simulation of interactions between surgical instruments and biological tissues. It involves multi-disciplinary research areas including soft tissue mechanical behavior, tool-tissue contact mechanics, computer haptics, computer graphics and robotics integrated into VR-based training systems. The research described in this paper addresses the problem of characterizing soft tissue properties for medical virtual environments. A system to measure in vivo mechanical properties of soft tissues was designed, and eleven sets of animal experiments were performed to measure in vivo and in vitro biomechanical properties of porcine intra-abdominal organs. Viscoelastic tissue parameters were then extracted by matching finite element model predictions with the empirical data. Finally, the tissue parameters were combined with geometric organ models segmented from the Visible Human Dataset and integrated into a minimally invasive surgical simulation system consisting of haptic interface devices and a graphic display.

• The Journal of the Korea Contents Association
• /
• v.14 no.8
• /
• pp.40-49
• /
• 2014

Globalisation has intensified the international movement of labour and South Korea is no exception. Korea, which in the past was itself a labour-exporting country, has seen a reversal in human mobility since the late 1990's with a rapid growth in immigration and a transformation of a previously almost ethnically homogenous society. In this context, the important questions about the cultural and political implications associated with the construction of minority representations in the media have remained highly unexplored. The starting point of this study is an examination of the vital role of public service broadcasting (PSB) in Korean society, where ethnic minorities have increasingly become visible. The study shows the significant role of PSB in representing cultural diversity in public debates and the ways in which such representations and their dissemination reflect media power.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.1
• /
• pp.21-28
• /
• 2016

Caves can serve as major outposts for future human exploration of the Moon and Mars. In addition, caves can protect people and electronic equipment from external hazards such as cosmic ray radiation and meteorites impacts and serve as a shelter. Numerous pit craters have been discovered on the Moon and Mars and are potential entrances to caves; the principal topographic features of pit craters are their visible internal floors and pits with vertical walls. We have devised two topographical models for investigating the relationship between the topographical characteristics and the inner void of pit craters. One of our models is a concave floor void model and the other is a convex floor tube model. For each model, optical photographs have been obtained under conditions similar to those in which optical photographs have been acquired for craters on the Moon and Mars. Brightness profiles were analyzed for determining the profile patterns of the void pit craters. The profile patterns were compared to the brightness profiles of Martian pit craters, because no good-quality images of lunar pit craters were available. In future studies, the model profile patterns will be compared to those of lunar pit craters, and the proposed method will likely become useful for finding lunar caves and consequently for planning lunar bases for manned lunar expeditions.

• Korean Journal of Agricultural Science
• /
• v.41 no.1
• /
• pp.59-63
• /
• 2014

Precision farming aims at reduced environmental impacts with increased productivity. Soils are multi-functional media in which air, water and biota occur together and form an essential part of the landscape with a fundamental role in the environment. The requirement for herbicides and fertilizers can vary within a field in response to spatial differences in soil properties. Near infrared (NIR) spectroscopy is widely used today as a nondestructive analytical technique which is capable of determining a number of physio-chemical parameters. The objectives of this study were to develop optimal models to predict chemical properties of paddy soils by visible and NIR reflectance spectra. Total of 60 soil samples were collected in spring from 20 paddy fields within central regions in Korea. Reflectance spectra, moisture contents, pH, total nitrogen (N), organic matter, available phosphate ($P_2O_5$) of soil samples were measured. The reflectance spectra were measured in wavelength ranges of 400-2,500 nm with 2 nm interval. The method of partial least square (PLS) analysis was used to determine the soil properties. The PLS analyses showed good correlation between predicted and measured chemical properties of paddy soils in the wavelength range of 1,800-2,400 nm. Especially, it showed better performance than the previous results which used the entire wavelength range of the spectrophotometer, without considering the optimal wavelength of each soil properties.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.2
• /
• pp.181-191
• /
• 2006

The objectives of this study were to evaluate the tensile strength of resin-infiltrated demineralized dentin according to the demineralization time, and to evaluate the tensile strength of hybrid layer that is formed by infiltrating different priming adhesives or primer/adhesive into demineralizd dentin matrix. Seventy five hour-glass shaped dentin specimens were prepared in mid-coronal dentin from extracted human molars. Thirty specimens were distributed into three groups according to demineralization time - 2 hours, 4 hours and 8 hours. Each specimen was placed in primer/adhesive of All-Bond 2 for 5 hours of infiltration. Another forty-five specimens of them were demineralized in 37% phosphoric acid for 4 hours. They were randomly assigned to three experimental groups - AB, SB and OS - to designate All-Bond 2, Single Bond and One-Step. Each specimen was placed in one of three different adhesives for 5 hours of infiltration. The specimens were visible light-cured for 5 minutes, and then stored for 24 hours in distilled water at $37^{\circ}C$. After that, microtensile bond strength for each specimen was measured, and the fractured surfaces were then observed by SEM. The data were statistically analysed by one-way ANOVA and Tukey's multiple comparison test and Bonferroni's multiple comparison test. The results were as follows; 1. Tensile strength of the group demineralized for 4 hours was significantly higher than that of groups demineralized for 2 hours and 8 hours (P < .01). 3. Tensile strength of the AB group was significantly higher than that of the SB group and OS group (P < .01).

• Biomedical Science Letters
• /
• v.26 no.3
• /
• pp.157-163
• /
• 2020

Long-term exposure to environmental pollutants can impair the human skin's barrier function and promote skin aging mechanisms. The visible consequences of these effects are dryness, wrinkles, black spots and worsening skin sensitivity. As awareness of the effects of environmental stressors on the skin has recently increased, consumers' demand for cosmetics that can provide anti-pollution effects is increasing. In this study, the possibility of anti-pollution cosmetic material was investigated by measuring the inhibitory effect of free radicals using a mixture of Nypa fruticans Wurmb (NF), Saussurea neoserrata (SN), Codium fragile (CF) and Enteromorpha compressa (EC), which has anti-inflammatory and antioxidant effects against irritation caused by dust. Combining the experimental results of a mixture of NF, SN, CF and EC by induction of fine dust stimulation, inhibition of inflammatory factors (PGE₂) and intracellular free radicals (ROS) by inhibiting effects were significant, indicating the possibility of use as anti-pollution cosmetics. The most plants used as sources of anti-pollution cosmetic ingredients contain antioxidants as active substances. In our highly industrialized and chemically polluted world, it is not surprising that most plants used as sources of anti-pollution cosmetic ingredients contain antioxidants as active substances. Considering our results, it can be suggested that this anti-pollutant consisting of NF, SN, CF and EC may be a good ingredient for skincare products for the cosmetic industry due to their antioxidant properties, which may especially alter skin aging.

• Journal of Veterinary Clinics
• /
• v.34 no.4
• /
• pp.295-298
• /
• 2017

A 6-year-old female Pekingese dog, weighing 3.85 kg was presented with regurgitation, ptyalism, weight loss and anorexia. The dog was cachexic and severely dehydrated. Physical examination of the dog confirmed upper respiratory noise, which was classified as a stridor most apparent on inspiration, respiratory effort with stenotic nares. Upper respiratory signs were thought to be caused by brachycephalic syndrome. On the lateral thoracic radiograph, the caudal one third of the esophagus was visible as a soft tissue band. CT revealed oval-shaped, soft tissue attenuating mass in size of $2.3{\times}1.0{\times}1.1cm$ arising from caudal one third of the esophagus. The mass was protruding from esophageal wall to lumen and irregular margined with heterogenous contrast enhancement. The wall of cardia and fundus was focally thickened. Gastric lymph node was enlarged with contrast enhancing. On histopathologic examination, esophageal mass was confirmed as papillary adenocarcinoma, and the gastric sample showed the same result. In human, adenocarcinoma commonly occur in esophagus and cardia, but it has not been commonly reported in veterinary medicine. This report described computed tomographic features of adenocarcinoma of the esophagocardia region in a Pekingese dog with brachycephalic syndrome.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.289-302
• /
• 1995

The purpose of this study was to estimate the shear bond strength and observe the fractured and interfacial surfaces of various dentin bonding agents used conjunction with a visible light cured composite. The senentytwo human premolars and molars extracted due to periodontal or orthodontic reasons were used and randomely divided into six groups. All the prepared dentin surfaces were treated with Superbond D-liner, Scotchbond Multi-Purpose, All-Bond 2 and Prisma Universal Bond 3 accroding to the manufacturer's instructions. Six specimens were then demineralized in 10 % HCl for 24 hours and the other six specimens were not demineralized in order to observe the interfacial surfaces with Hitachi X-450 SEM at 25Kv. Also shear bond strength were obtained using an Instron Testing Machine with a crosshead speed of 1mm/min. The following results were obtained : 1. Although shear bond strength of Superbond D-Liner(17.35 MPa) and Scotch-bond Multi-Purpose group(17.29 MPa) were higher than the All-Bond 2(12.80 MPa) and Prisma Universial Bond 3 (13.43 MPa), there were no significant statistic differences in the shear bond strength between 4 groups.(P<0.05) As a result of etching to dentin in Prism a Universial BOND 3 experimentally, the resin tag was formed, but shear bond strength was decreased. 2. The resin tag into the opened dentinal tubule was formed in Superbond D-Liner, Scotchbond Multi-Purpose, All-Bond 2(etching) and Prisma Universial Bond 3(etching), but not in the All-Bone 2 and Prism a Universial Bond 3(non-etching). 3. Strong, durable bonds between dentin and dentinal bonding agents are essential, not only resin tag into the dentinal tubules, but also hybrid layer.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.537-561
• /
• 2017

Machines and robotic structures are questioning existential bases of human beings. They influence our way of thinking and transform our social philosophies and value systems. The same time they keep their fascination ever since. Mechanical technique and skills are symbols for development and hazard at the same time. The attraction of this ambivalence is reviewed in this thesis by having a look at kinetic elements in modern sculpture. The author is focusing on classical sculptural positions that use machines or machinery within sculptural artworks. The historical development is examined and certain examples from the classical modern era are discussed as role models during their time. On this scenario, the portraits of two young contemporary outstanding positions in the field of kinetic art and installation are analyzed and explained. One of the goals was to investigate the eastern and the western language of two artists that are doing artworks in the same field and compare the works and the cultural expressions to each other. Different cultural positions and visual languages become visible due to the research. And the author's final conclusions is, that even in a globalized world there will always be significant local distinguishes remaining.