• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.430-432
• /
• 2008

Visible channel calibration method using deep convective clouds (DCCs) is developed. The method has advantages that visible radiance is not sensitive to cloud optical thickness (COT) for deep convective clouds because visible radiance no longer increases when COT exceeds 100. Therefore, once DCCs are chosen appropriately, and then cloud optical properties can be assumed without operational ancillary data for the specification of cloud conditions in radiative transfer model. In this study, it is investigated whether IR measurements can be used for the selection of DCC targets. To construct appropriate threshold value for the selection of DCCs, the statistics of cloud optical properties are collected with MODIS measurements. When MODIS brightness temperature (TB) at 11 ${\mu}$ m is restricted to be less than 190 K, it is shown that more than 85% of selected pixels show COT ${\geq}$ 100. Moreover, effective radius ($r_e$) distribution shows a sharp peak around 20 ${\mu}m$. Based on those MODIS observations, cloud optical properties are assumed as COT = 200 and $r_e$ = 20 ${\mu}m$ for the simulation of MODIS visible (0.646 ${\mu}m$) band radiances over DCC targets.

• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.145-152
• /
• 1984

The purpose of this study was to compare combinations of the four visible light irradiating appliances (Translux, Heliomat, Pluraflex HL 150, Omega) and the four visible light activated composite resins (Durafil, Heliosit, Plurafil-super, Silux) to determine the depth of polymerization of each combination. Twenty samples were made with Durafil. Five samples were polymerized for 20 seconds using Translux, five with Heliomat, five with Pluraflex HL 150, five with Omega. Twenty samples were made with Heliosit, twenty with Plurafil-super, and twenty samples with Silux. A 20-second polymerization time was applied with each of 4 visible light irradiating appliances to 5 samples of each material. Eighty samples were treated in a like manner, but polymerization was extended to 40 seconds. Depth of polymerization were measured with caliper. The results were as follows. 1) Of the two time exposures, 40-second exposure provided a significantly greater depth of polymerization than 20-second for each light with each material. 2) Durafill-Translux system showed minimum depth of polymerization, and Plurafil-Pluraflex system showed maximum depth of polymerization. 3) Visible light irradiating appliances were able to harden the resins cured by tire visible lights of other makers' apparatuses. 4) In all circumstances, depth of polymerization was between 3.0-3.8mm.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.268-270
• /
• 2003

국내에서의 의료영상에 관한 관심도가 높아짐에 따라 Visible Korean Human Project가 시작되었다. 이를 통해 얻어진 해부영상들의 다양한 응용을 위해 분할작업은 필수적 단계로 이를 분할하기 위한 도구가 필요하다. 그러나 분할해야할 기관들의 종류가 많고 그 특성이 다양해서 기존의 분할도구로 적용하기에 많은 문제점이 나타나 새로운 분할도구개발의 필요성이 나타났다. 새로운 분할도구에서는 각 기관의 특성 에 알맞은 다양한 방법의 분할 방범을 제공하여 분할방법에 따라 다른 분할결과를 통합적으로 표현하여 보다 용이한 처리를 가능하도록 설계되었다. 구현된 분할 도구는 반자동 분할 방법과 슬라이스간 전달 방법을 사용하여 보다 적은 사용자의 입력으로도 빠른 시간에 많은 양의 데이터를 분할 할 수 있도록 자동화 설계되었으며, 자동적으로 분할된 결과가 사용자의 의도와 다른 경우 설계 편집할 수 있는 기능도 제공하도록 구현했다. 구현된 분할도구를 통해 Visible Korean Human Dataset의 분할 실험을 했으며 기존의 분할 도구에 비해 이르고 정확한 결과를 얻어 낼 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1108-1116
• /
• 2011

The visible light communication system that transmits data by controlling light emission of LED and receives data through photo detecter is considered as one of the strong candidates of the next generation wireless communication systems. The visible light communication provides both lighting and wireless communication wherever the LED lamps are installed. Due to the feature of visible light communication system, the communication is possible within the area that LED light reaches, and the communication quality depends on the light intensity received at the receiver. In this paper, we analyze the effects of LED panel position and lighting angel on communication channel quality in visible light communication systems. Through computer simulations, we prove that position of LED panel and light angle have a great impact on illuminance and SNR of the visible light communication systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.4
• /
• pp.247-256
• /
• 2013

According to the complete standard document for PHY/MAC layer of visible light communication through the IEEE 802.15.7 WG on Sept. 2011, visible light communication lays a good foundation for developing a variety of application services. Thus, visible light communication moves to the advanced research period for developing application services, but most of applications are limited only to PtP service model. However, PtMP communication environment for VLC is required to accommodate more various applications. In this paper, we analyze an effect of key parameters on network performance in the star topology based visible personal area network system. We implement a simulator with considering attributes of PHY and MAC layer which are defined by IEEE 802.15.7 standard documents, and analyze the VLC performance.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.5
• /
• pp.437-443
• /
• 2015

This paper presents face recognition based on the fusion of visible image and thermal infrared (IR) texture estimated from the face image in the visible spectrum. The proposed face recognition scheme uses a multi- layer neural network to estimate thermal texture from visible imagery. In the training process, a set of visible and thermal IR image pairs are used to determine the parameters of the neural network to learn a complex mapping from a visible image to its thermal texture in the low-dimensional feature space. The trained neural network estimates the principal components of the thermal texture corresponding to the input visible image. Extensive experiments on face recognition were performed using two popular face recognition algorithms, Eigenfaces and Fisherfaces for NIST/Equinox database for benchmarking. The fusion of visible image and thermal IR texture demonstrated improved face recognition accuracies over conventional face recognition in terms of receiver operating characteristics (ROC) as well as first matching performances.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1589-1595
• /
• 2010

In order to effective degradation of organic dye both under visible light or ultrasonic irradiation, the MWCNTs (multiwalled carbon nanotube) deposited with Fe and $TiO_2$ were prepared by a modified sol-gel method. The Fe/$TiO_2$-MWCNT catalyst was characterized by surface area of BET, scanning electron microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD), and energy dispersive X-ray (EDX) and ultraviolet-visible (UV-vis) spectroscopy. The low intensity visible light and low power ultrasound was as an irradiation source and the methylene blue (MB) was choose as the model organic dye. Then degradation experiments were carried out in present of undoped $TiO_2$, Fe/$TiO_2$ and Fe/$TiO_2$-MWCNT catalysts. Through the degradation of MB solution, the results showed the feasible and potential use of Fe/$TiO_2$-MWCNT catalyst under visible light and ultrasonic irradiation due to the enhanced formation of reactive radicals as well as the possible visible light and the increase of ultrasound-induced active surface area of the catalyst. After addition of $H_2O_2$, the MB degradation rates have been accelerated, especially with Fe/$TiO_2$-MWCNT catalyst, in case of that the photo-Fenton reaction occurred. The sonophotocatalysis was always faster than the respective individual processes due to the more formation of reactive radicals as well as the increase of the active surface area of Fe/$TiO_2$-MWCNT catalyst.

• Genomics & Informatics
• /
• v.11 no.2
• /
• pp.93-96
• /
• 2013

The prediction of externally visible characteristics from DNA has been studied for forensic genetics over the last few years. Externally visible characteristics include hair, skin, and eye color, height, and facial morphology, which have high heritability. Recent studies using genome-wide association analysis have identified genes and variations that correlate with human visible phenotypes and developed phenotype prediction programs. However, most prediction models were constructed and validated based on genotype and phenotype information on Europeans. Therefore, we need to validate prediction models in diverse ethnic populations. In this study, we selected potentially useful variations for forensic science that are associated with hair and eye color, iris pattern, and facial morphology, based on previous studies, and analyzed their frequencies in 1,920 Koreans. Among 20 single nucleotide polymorphisms (SNPs), 10 SNPs were polymorphic, 6 SNPs were very rare (minor allele frequency < 0.005), and 4 SNPs were monomorphic in the Korean population. Even though the usability of these SNPs should be verified by an association study in Koreans, this study provides 10 potential SNP markers for forensic science for externally visible characteristics in the Korean population.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.598-601
• /
• 2000

We investigated the fabrication of Si nanoparticle and $C_{60}$ thin films by pulsed laser ablation. As a result, we observed visible green photoluminescence spectra in the Si/C$_{60}$ multilayer films after laser annealing. It is considered that this green photoluminescence is occurred from SiC particles, which is produced reaction of Si nanoparticles with $C_{60}$ via laser annealing.ing.

• Journal of the Korean Society of Earth Science Education
• /
• v.8 no.1
• /
• pp.35-44
• /
• 2015

The purpose of this paper is to identify the conceptions of middle school and high school students about visible light, Ultra violet(UV) and Infrared ray(IR). We administered questionnaire 40 people of middle school 3rd students and 43 people of high school 2nd students in Gyeonggi-do. Misconceptions about visible light, UV and Ir were observed in many students. The results of study are as follows: Firstly, Many students think that it is possible to see objects without visible light. The explanations given by students for the visiblity of objects in darkness indicates a heavy reliance on personal experiences. Secondly, we have confirmed that high school students well understand the fact that the object reflects the light. However, a significant number of students exhibited an eye-centered perspective of vision. Thirdly, students had a variety of ideas about the meaning of the term UV and IR. Analysis of questionnaire data indicates that many students believe that it is possible to see objects in the presence of UV light alone.