• Korean Chemical Engineering Research
• /
• 제54권5호
• /
• pp.706-711
• /
• 2016

점성유체 액체-고체 순환유동층에서 고체순환속도의 특성에 대해 고찰하였다. 주액체유속, 2차액체의 유속, 유동입자의 크기, 액체의 점도 그리고 입자의 재순환을 위한 장치에서 입자 저장층의 높이가 입자의 순환속도에 미치는 영향을 검토하였다. 입자의 순환속도는 주액체의 유속, 2차액체의 유속, 액체의 점도 그리고 입자저장층의 높이가 증가함에 따라 증가하였으나, 유동입자의 크기가 증가함에 따라서는 감소하였다. 순환유동층의 상승관에서 유동입자의 상승속도는 주액체유속과 2차액체의 유속비($U_{L1}/U_{L2}$)와 유동입자의 크기가 증가함에 따라 감소하였다. 상승관에서 입자의 미끄러짐속도 즉, 연속액상의 유속과 유동입자의 상승속도비($U_L/U_S$)는 연속 액상의 점도가 증가함에 따라 감소하였으나, 유동입자의 크기가 증가함에 따라 증가하였다. 본 연구에서 구한 고체 순환속도는 실험변수 및 무차원군의 함수들로 상관식을 얻을 수 있었다.

• 한국입자에어로졸학회지
• /
• 제11권4호
• /
• pp.99-105
• /
• 2015

The possible existence forms of particle aggregates in liquid medium are classified into four different types according to their morphological characteristics, including the single particles that are separated from each other, the linear aggregates in which all component particles are located in a line, the planar aggregates where all particles are arranged on a plane, and the volumetric aggregates where all particles forms a three-dimensional space. These particle aggregates with different space morphologies have different fractal dimensions and different influence on the rheological phenomena of the solid-liquid system. The effects of various aggregates on the suspension viscosity are analyzed and related with the particle concentration, and then a mathematical model is presented to determine the fractal dimensions of various aggregates by measuring the apparent viscosity of the solid-liquid system. In the model, the viscous fractal dimension is developed as a new concept, the fractal dimensions of different aggregates can be obtained separately and then the relative components of various aggregates experimentally analyzed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.672-680
• /
• 2007

Apparatus of rotating disk and cup are widely used spray paintings and industrial boilers. This study was conducted experimentally to investigate the characteristics of liquid atomization in a rotating disk atomizer by means of viscous liquid mixed water and glycerin. The Purpose of this study are to observe breakup mechanism according to the variation of supplied flow rate $0.4{\sim}30 cm^3/s$ and rotating speed $200{\sim}4000rpm$, and to investigate three kinds of breakup Pattern such as drop ligament and film formation by comparing the transition flow rate. ligament number and ligament length to those of Tanasawa and Matsumoto's empirical formula. The results are as follows ; The higher it makes use of viscous liquid. the better it get the characteristics of breakup mechanism. Also When I compared practical value with experiential value at similar test conditions. it was shown similar tendency though were a little variation.

• 한국분무공학회지
• /
• 제2권3호
• /
• pp.17-24
• /
• 1997

A simplified experiment was performed to figure out the atomization characteristics of rice-bran oil which it is highly viscous liquid by applying ultrasonic energy. A spray system, an ultrasonic system, and three kinds of hole-type nozzles(hole diameter: 0.31, 0.34, 0.37mm) were manufactured. To investigate the effects of ultrasonic energy on the atomization of a highly viscous liquid, a phase doppler particle analyzer was used for measurement and calculation of spray droplets data. Nozzle opening pressures were chosen of 3 levels, i.e, 16, 20, and 24MPa. As a result, it could be concluded that the ultrasonic energy was effective to improve the spray atomization when it applied to the fuel by means of 3 different nozzles because of the effects of the liquid fuel cavitation and relaxation between molecules caused by ultrasonic energy. The improvement rate of the spray atomization by the ultrasonic method compared with the conventional spray increased about 15% in the case of hole type nozzles. By increasing of the nozzle opening pressure and decreasing of the hole diameter, the atomization of spray droplets was improved.

• 소성∙가공
• /
• 제13권1호
• /
• pp.9-14
• /
• 2004

Recently, various bulk metallic glasses (BMG's) having good mechanical and chemical properties were developed. BMG's can easily be deformed in the supercooled liquid region, via viscous flow mechanism. By using the viscous flow, the very low pressure is needed to deform the materials. In this study, we investigated the structural transition and deformation behavior of Vitreloy 1 (Zr/sub 41.2/Ti/sub 13.8/Cu/sub 12.5/Ni/sub 10/Be/sub 22.5/) using TMA and DSC. We applied the results to the micro forming process. The forming condition was chosen based on the viscosity data from TMA, and Si wafer with micro patterns on the surface was used as a forming die. The deformed surface was analyzed by SEM and 3D Surface Profiling System. The alloy showed good replication of the patterns. Quantitative measurement of roughness was useful to evaluate the replication. Surface condition of the deformed surface was determined by the initial surface condition.

• Journal of Biosystems Engineering
• /
• 제21권4호
• /
• pp.467-473
• /
• 1996

Ultrasonic energy was applied for atomizing rice-bran oil which is a highly viscous bio fuel. Six different nozzles, an injection simulator, and an ultrasonic generator system were designed and constructed for the experiment. An immersion liquid method was used for the measurement of injection droplet sizes. The characteristics of injection droplets was investigated with respect to the numbers of the droplets with diameters ranging from 5$\mu$m 50$\mu$m and to the Sauter mean diameter. The results showed that the ultrasonic energy was effective for the improvement of the atomization of the injection droplets for all the factors such as type of nozzles, nozzle opening pressures, and collection distances.

• 설비공학논문집
• /
• 제10권3호
• /
• pp.260-270
• /
• 1998

The viscous plane stagnation-flow solidification problem is theoretically investigated. An analytic solution at the beginning of solidification is obtained by expanding the temperature and thickness of solidified layer in powers of time. An exact expression for the steady-state thickness of solidified layer is also obtained. The .fluid flow toward the cold substrate inhibits the solidification process. As Stefan number becomes larger, or Prandtl number becomes smaller, the solidification is more strongly inhibited by the fluid flow. The transient heat flux at the liquid side of solid-liquid interface is increased, as Stefan number or Prandtl number is increased.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.726-739
• /
• 2003

A multi-dimensioanl model is being increasingly used to predict the thermo-flow field in the gas turbine combustor. This article addresses an integrated survey of modeling of the liquid spray formation and fuel distribution in gas turbine with high-shear nozzle/swirler assembly. The processes of concern include breakup of a liquid jet injected through a hole type orifice into air stream, spray-wall interaction and spray-film interaction, breakup of liquid sheet into ligaments and droplet,5, and secondary droplet breakup. Atomization of liquid through hole nozzle is described using a liquid blobs model and hybrid model of Kelvin-Helmholtz wave and Rayleigh-Taylor wave. The high-speed viscous liquid sheet atomization on the pre-filmer is modeled by a linear stability analysis. Spray-wall interaction model and liquid film model over the wall surface are also considered.

• Korean Chemical Engineering Research
• /
• 제49권1호
• /
• pp.83-88
• /
• 2011

점성슬러리 기포탑에서 작은 기포의 체류량 특성에 대해 고찰하였다. 정압 강하방법(Static pressure drop method)에 의해 구한 기포탑 내부전체 기포체류량과 이중저항탐침법(dual resistivity probe method)에 의해 구한 큰 기포의 체류량으로부터 기포탑 내부에 체류하는 작은 기포의 체류량을 구할 수 있었다. 기체유속, 연속액상의 점도 그리고 슬러리 상중에 포함된 고체입자의 분율이 전체 기체체류량, 큰 기포의 체류량 그리고 작은 기포의 체류량에 미치는 영향을 검토하였다. 점성슬러리 기포탑에서 작은 기포의 체류량은 기체의 유속이 증가하면 증가하였으나 연속액상의 점도와 슬러리상에 포함된 고체입자의 분율이 증가하면 감소하였다. 기포탑 내부에 체류하는 전체 기포 체류량 중 작은 기포 체류량의 분율은 기체유속이 증가하면 증가하였으나 연속액상의 점도와 슬러리상에 포함된 고체입자의 분율이 증가하면 감소하였다. 기포탑 내부에 체류하는 작은 기포는 큰 기포의 상승속도에 영향을 미치지 못하였다.

• 대한화장품학회지
• /
• 제25권4호
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and E and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then the on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to form a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5:1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin's moisture. Vitamins A and E contribute to preventing skin aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer. The crystalline structures of gel were surface-chemically-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC. Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Daegeon and Pusan in Korea and Hokkaido, Osaka and Miyazaki in Japan with correlation to the climate.