• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.11
• /
• pp.1001-1007
• /
• 2003

The silicone fluids have been generally used as processing agent in silicone rubber(SIR) compounding. The addition of hydroxy silicone (HS) fluids to SIR for insulator housing material is required to meet the good electrical performance and the good processability. In this study, SIR with HS fluids was evaluated to investigate how the kinds of them affect insulation properties. The contact angle of the virgin sample of 40-HS SIR was low and its recovery rate was also slow. The recovery rate of 50-HS SIR was the highest being decreased with the viscosity increase of HS fluids. The tracking resistances and the corona aging resistance of 70-HS SIR and 1,040-HS SIR were excellent Tracking resistance depended largely on heat resistance of silicone fluids. But arc resistance didn't depend merely on the kind of silicone fluids.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.123-128
• /
• 1998

Dihydroxyacetone (DHA) has been used as a self tanning agent and many emulsion formulations containing DHA have been studied. In an emulsion, many factors which have negative effect on DHP and the resultant DHA decomposition can destabilize the emulsion base. In this study, two kinds of emulsion with 5％ DHA were prepared, O/W type emulsion and Multilamellavesicle (MLV) type emulsion to compare the stabilization effects of both emulsions on the DHA. The OHA concentration was analyzed quantitatively by high performance liquid Chromatography (HPLC), also the pH and viscosity of both emulsions were measured for stability. This process was carried out over 4 months. For HPLC, a bondaclone $C_{18}$ column with a mobile phase of distilled water and UV detector were used. The results of these experiment showed that DHA is more stable in an MLV emulsion than it is in an O/W type emulsion.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.290-294
• /
• 1996

High-Belite cement had a better slump flow characteristics than type I cement and slag cement, and its varation of slump flow with time was also excellent. As the amount binder added was increased, the strength increased while material separation decreased. This phenomena was obvious when the amount of cement was abobe 500kg/$\textrm{m}^3$ . When the amount of cement and S/a were 516kg/$\textrm{m}^3$ and 52% respectively, the application strength of 600kg/$\textrm{m}^3$ was satisfied. Since, however, the aggreate size of 25mm was somewhat unsatisfactory, the characteristics of high performance concrete could be obtained by the addition of the viscosity-enhancing agent.

• Korean Journal of Pharmacognosy
• /
• v.15 no.1
• /
• pp.30-38
• /
• 1984

Yam, Dioscorea batatas Decne (Dioscoreaceae) is a plant growing in Korea. Dioscoreae Rhizoma in the markets are classified into natural and cultural ones. These studies were conducted to investigate the differencies between natural and cultural Yams by characteristics of morphology, cell contents, chemical components and physical properties. More mucilage cells which contain calcium-oxalate raphides were contained in cultural Yam than natural Yam. However, the amount of crude protein, crude lipid and mucilage viscosity, swelling, gelatinization of polysaccharides were greater in natural Yam than the other. It is suggested that natural Yam is excellent as nutrition agent in quality and worthwhile as a resource of crude drugs.

• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.7-12
• /
• 2004

For CFCs and Halons regulated by Montreal Protocol and their alternatives of HFC-23, HFC-125 HFC-227ea, HFC-236fa and the mixtures of inert gases of $Ar, N_2 and CO_2$, the thermodynamic properties of saturated pressure, density, enthalpy and viscosity were compared. In this study, the data from literature were expressed as a function of temperature. Thermodynamic properties of HFC compounds were similar to those of Halon-1301. Inert gas was mainly used as a mixture, but the physical properties of the inert gas does not have the favorable advantages over those of Halon-1301.

• Elastomers and Composites
• /
• v.26 no.1
• /
• pp.15-22
• /
• 1991

Blends of ethylene-propylene-diene terpolymer(EPDM) and high density polyethylene(HDPE) have been prepared in a roll mill by the process "dynamic curing" where both blending and a crosslinking reaction was carried out simultaneously. As a crosslinking agent, dicumyl peroxide(DCP) was used. Throughout the experimental ranges, the dynamically cured polyblends were shown to be thermoplastic elastomers except highly crosslinked blends of high compositions of EPDM. The increase of melt viscosity was observed as EPDM composition and DCP contents increased. From DSC determinations, the crystallinity decreased with increasing contents of DCP. The tensile strength and elongation at break generally increased with increasing DCP content and increasing HDPE compositions, but highly depended on the combined effects of decreasing crystallinity and increasing crosslinking density.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.42-47
• /
• 2019

The four different polymer compounds were manufactured to make cable sheath for ship industry. Two kinds of ethylene-vinyl acetate (EVA) were selected as main matrix polymers for compounding with fire retardant, crosslinking agent, filler, plasticizer, and other additives. The properties of the four compounded materials were investigated with the contents of fire retardant, silane coated aluminum hydroxide (S-ATH). Rheology, Mooney viscosity, and tensile strength increased with S-ATH contents by reinforcing effect. With increasing fire retardant amount, fire resistance increased, but cold resistance didn't show an obvious enhancement due to polar effect of vinyl acetate in EVA.

• CELLMED
• /
• v.12 no.3
• /
• pp.12.1-12.6
• /
• 2022

With a prevalence incidence of 8 % to 37%, unexplained infertility (Uqr) is by definition empiric because it does not address a particular defect or functional deficits. Couples with unexplained infertility have a higher than zero chance of becoming pregnant without treatment, but it is less likely than couples who are fertile. The ingredients in the Unani formulation, are baikh asgand (Withania somnifera Dunal), baikh piyabansa (Barleria prionitis Linn), gule dhawa (Anogeissus latifolia), and gule nilofar (Nymphaea alba Linn), were used to treat unexplained secondary infertility, possess the characteristics of muqawwi bah (Aphrodisiac), muqawwi Rahim (Uterotonic), muwallid-i-mani (ovulation-inducing), and mughalliz-i-mani (an agent which increases the viscosity of semen) beginning from the fifth day of the last menstrual cycle for five days with milk. The first cycle of treatment led to the conception of the women.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.13-25
• /
• 2007

Viscosity, adhesion and cohesion of asphalt binder are very important characteristics in asphalt pavement. However, these characteristics can cause some problems such as inaccurate amount of asphalt mixture, reduction of asphalt content and loss of workability during asphalt pavement construction. Asphalt release agent has been used to solve these problems. Diesel oil and vegetable oil are generally used as an asphalt release agent in Korea. However, these agents have been criticized from environmental and binder integrity reasons. Therefore, this study evaluated the characteristics of asphalt release agents including diesel oil, vegetable oil and two emulsion type oils. From the study, it was found that the diesel oil resolved the binder within ten minutes and vegetable oil stripped the binder from mixture within one hour after contacting with asphalt mixture. And also, from the test for estimating the application cycle of asphalt release agent, it appears that diesel oil and vegetable oil should be applied to construction equipments every time in their uses. However, diesel oil and vegetable oil showed a good performance as a lubricant for detaching the asphalt mixtures from the truck bed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.442-449
• /
• 2017

In this study, a method to inject small amount of activation agent from the outside of the pipeline to the inside wall of the pipe was newly proposed to enhance pumping efficiency of cementitious materials. The activation agent is injected into the slip-layer, which is generally formed in the vicinity of the inside wall of the pipe during pumping cementitous materials. Through the injections, it is expected to decrease viscosity of slip-layer, namely, the friction between the mateirals and the pipe. The proposed method was verified by lab-scale pumping tests with mortars having water to cement ratio of 47%. The tests were performed with two different type of activation agents(superplasticizer and anionic surfactant) and three different amount of the agents(0.14, 0.28, 0.42% of the mortar volume). The compressive strength were measured with and without injecting the activation agent, and the internal pressures of pipeline were measured. When the anionic surfactant was used, there was no change in the compressive strength. As the amount of anionic surfactant increased, the pumping pressure decreased up to 71.4% at the maximum.