• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.385-388
• /
• 2008

The objective of this paper is simulating blood flow through the branched and stenotic tube numerically. SC-Tetra, which is one of the commercial code using FVM method, was utilized for this analysis. The flow is assumed as an incompressible laminar flow with the additional condition of non-Newtonian fluid. As the constitutive equation for the fluid viscosity, the following models were solved with governing equations ; Cross Model, Modified Cross Model, Carreau Model and Carreau-Yasuda Model. Final goal was achieved to get analytic data about shear stress, at specific points, changing the geometry with various factors like the bifurcation angle, diameter of the branches, the ratio of stenosis, and etc. The material property of blood was referred from the related papers. Furthermore, to verify results they were compared with those of the published papers. There were some discrepancies based on the different solver and the different data post-processing method. However, many parameters like the location of low shear stress, which arised from bifurcation or stenosis, and the tendency of various factors were found to be very similar.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.1-10
• /
• 2014

Offset paper printing is a promising roll-to-roll technique for color printed materials. Although it is no doubt that understanding ink transfer mechanism in offset printing process is necessary to achieve high printing quality, investing the relationship between inks and substrates at the nip is difficult experimentally due to high printing speed. In this paper, rheological behavior and splitting point of the ink at the nip is studied using package software Ployflow and Flow 3D based on Navier-Stokes equation. Polydimethylsiloxane (PDMS) ink and IGT printability tester were used for an model ink and experiment to compare with that of simulation data, respectively. As a result, higher viscosity at state flow and pressure increased ink transfer due to higher possibility of presence of cavitation at the nip and increase in covering area ratio. These results have shown good agreements with experimental data compared by measuring density of print through.

• 한국해양학회지
• /
• 제21권4호
• /
• pp.259-264
• /
• 1986

進行性 有限 振幅波가 수평인 底部 境界面 위에 存在할 때 이 波로 因하여 境界面에 인접해서 形成되는 定常流(steady stream)를 硏究하였다. 이를 위하여 境界層 方程式이 使用되었으며, 이것을 二重 Fourier 系別로 展開함으로써 그 解를 구하였다. 이 解의 垂直, 構造를 水深과 波長의 比(h/L)의 양수로 表示하였다. 有限 振幅波가 가장 잘 適用될 수 있는 條件下에서 境界層의 定常流를 구해본 結果 이 定常波는 물의 粘性에는 無關하며 그 上部에 있는 有限 振幅波의 파라메타들, 즉 週期, 波長등과 水深의 計數임이 確認 되었다. 또 이 境界層의 定常流의 速度는 파속과, 水深에 대한 波高의 比(H/L)의 제곱에 比例함이 밝혀졌으며, 이 正常流의 크기는 h/L이 0.5보다 클때에는 아주 작아져서 無意味한 값이 된다.

• 폴리머
• /
• 제26권4호
• /
• pp.452-461
• /
• 2002

본 연구에서는 폴리아미드 6 (PA 6)을 70~$160^{\circ}C$에서 장시간 사용하였을 때 산화방지제의 사용유무 및 농도에 따른 열 안정성을 조사하였다. 70~$160^{\circ}C$의 온도범위내의 열 산화반응 시 모든 시료는 100시간 내에 황변 현상이 일어났다. 기계적 물성, 황변 지수, 점도측정으로 가장 적정한 산화방지제의 농도를 조사하였다. 일, 이차 산화방지제의 조성변화에 의한 산화방지효과는 미미하였다. 황변 현상의 분석은 NMR, IR, 그리고 element analysis (EA)를 사용하였다. $^{13}C$ NMR에 의해 서로 다른 카르보닐기의 존재를 확인하였으며, 산소의 소모량 측정은 EA를 사용하였다. Arrhenius식을 이용하여 산화방지제를 첨가한 시료와 그렇지 않은 시료의 lifetime을 예측하였다.

• Elastomers and Composites
• /
• 제50권2호
• /
• pp.92-97
• /
• 2015

A study on reaction kinetics for a PTMG/TDI prepolymer with 2,2'-dichloro-4,4'-methylenedianiline (MOCA), of which formulations may be generally used for fabricating high performance polyurethane elastomers, was peformed using non-isothermal differential scanning calorimetry (DSC). A number of thermograms were obtained at several constant heating rates, and analysed using Flynn-Wall-Ozawa (FWO) isoconversional method for activation energy, $E_a$ and extended-Avrami equation for reaction order, n. Urea formation reaction of the present system was observed to occur through the simple exothermic reaction process in the temperature range of $100{\sim}130^{\circ}C$ for the heating rate of $3{\sim}7^{\circ}C/min$. and could be well-fitted with generalized sigmoid function. Though activation energy was nearly constant as $53.0{\pm}0.5kJ/mol$, it tended to increase a little at initial stage, but it decreases at later stage by the transformation into diffusion-controlled reaction due to the increased viscosity. Reaction order was evaluated as about 2.8, which was somewhat higher than the generally well-known $2^{nd}$ order values for the various urea reactions. Both the reaction order and reaction rate explicitly increased with temperature, which was considered as the indication of occurring the side reactions such as allophanate or biuret formation.

• 대한화학회지
• /
• 제21권2호
• /
• pp.132-138
• /
• 1977

$SO_2$/KOH 촉매에 의한 ${\varepsilon}$-caprolactam의 음이온 중합을 시도하였으며 얻어진 중합체의 percent conversion 및 중합에 미치는 여러 요인을 조사하였고 중합체의 물리적 성질 및 반응속도에 대하여 고찰하였다. $SO_2$/KOH 촉매에 의하여 얻은 중합체는 hydrolytic polymerization에 의하여 제조된 nylon 6 보다 저온에서 중합이 가능하며 고유점도 및 융점이 더 높은 것으로 보아 중합도도 높으며 중합체의 분자 배열이 더 규칙적으로 배열되어 있다는 것을 추리할 수 있었다.

• Smart Structures and Systems
• /
• 제17권2호
• /
• pp.275-296
• /
• 2016

This paper focuses on developing a new configuration on magnetorheological (MR) brake damper as prosthetic knee. Prosthetic knee uses magnetic fields to vary the viscosity of the MR fluid, and thereby its flexion resistance. Exerted transmissibility torque of the knee greatly depends on the magnetic field intensity in the MR fluid. In this study a rotary damper using MR fluid is addressed in which a single rotary disc will act as a brake while MR fluid is activated by magnetic field in different walking gait. The main objective of this study is to investigate a prosthetic knee with one activating rotary disc to accomplish necessary braking torque in walking gait via T-shaped drum with arc surface boundary and implementing of Newton's equation of motion to derive generated torque at the inner surface of the rotary drum. For this purpose a novel configuration of a T-shaped drum based on the effects of a material deformation process is proposed. In this new design, the T-shaped disc will increase the effective areas of influences in between drum and MR fluid together and the arc wall crushes the particles chains (fibrils) of the MR fluid together instead of breaking them via strain in a conventional MR brake. To verify the proposed MR brake, results of the proposed and conventional MR brakes are compared together and demonstrated that the resisting torque of the proposed MR brake is almost two times greater than that of the conventional brake.

• International Journal of Aerospace System Engineering
• /
• 제2권2호
• /
• pp.67-72
• /
• 2015

The main concern of this study is to integrate the EARSM into an industrial RANS solver in conjunction with the $k-{\omega}$ model, as proposed by Hellsten (EARSMKO2005). In order to improve the robustness, particular limiters are introduced to turbulent conservative variables, and a suitable full-approximation storage (FAS) multi-grid (MG) strategy is designed to incorporate turbulence model equations. The present limiters and MG strategy improve both robustness and efficiency significantly but without degenerating accuracy. Two discretization approachs for velocity gradient on cell interfaces are implemented and compared with each other. Numerical results of a three-dimensional supersonic square duct flow show that the proper discretization of velocity gradient improves the accuracy essentially. To assess the capability of the resulting EARSM $k-{\omega}$ model to predict complex engineering flow, the case of Common Research Model (CRM, Wing-Body) is performed. All the numerical results demonstrate that the resulting model performs well and is comparable to the standard two-equation models such as SST $k-{\omega}$ model in terms of computational effort, thus it is suitable for industrial applications.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.190-193
• /
• 2010

고성능 액체로켓의 핵심 요소인 고압 연소기에 사용되는 분사기에 대한 혼합 및 연소 특성을 도출하기 위하여 초임계 상태에 적용되는 혼합 및 연소모델을 수치적으로 연구하였다. 난류모델은 LES(Large Eddy Simulation)를 기반으로 하였고, 난류연소모델은 혼합분율(Z)을 이용한 Laminar Flamelet Model을 사용하였다. 그리고 초임계 영역의 상태량을 계산하기위해 Soave Redlich-Kwong 상태 방정식, 점성계수와 열전도도에 대하여 Chung이 제안한 고압상태 혼합물에 대한 방정식, 확산계수에 대하여 Fuller 이론에 Takahashi가 제안한 고압상태의 특징을 고려한 식을 적용하였다. 계산결과는 선행연구자의 결과와 비교하였고, LOx post 후방에 발생되는 와류에 따른 보염영역에 대하여 연구하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3282-3285
• /
• 1999

Fluid characteristics at microscale were tried to be solved in this paper by showing how they deviate with conventional flow governing equations. (e.g. Navier-Stokes Equation) In earlier studies, this deviation phenomena was caused because of omitting no slip flow condition, micropolar effect and EDL(Electric Double Layer)effect of fluid which are usually negligible at macroscaled phenomena. The characteristics of fluid flow were tried to be studied by measuring pressure difference of specified length of the channels using the almost squared micromachined channels. By acquiring pressure difference, we could drive different values (viscosity, flow velocity. etc) from it and these data will be compared with macroscaled flow characteristics. As making microchannel is not easy work and that our knowledge is at mere stage, we had to fail to make it in this time. The hardest thing in this work is to make a hole which is directly connected with channel. The more efficient and easy way of making microchannel is proposed in this paper.