• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.177-185
• /
• 1999

The airfoil design optimization procedures based on the Navier-Stokes equations were developed, This procedure enables more realistic and practical transonic airfoil designs. The modified Hicks-Henne functions were used to generate the shape of airfoils. Five Hick-Henne functions were used to design upper surface of airfoil only. To enhance the ability of Hick-Henne function to generate various airfoil shape with limited number of functions, the positions of control points were adjusted through optimization procedure. The design procedure was applied to the single-point design for the drag minimization problem with lift and area constraints. The result shows the capability of the procedure to generate much realistic airfoils with very small drag-creep in the low transonic regime. This is mainly due to the viscosity effect of Navier-Stokes flow analysis. However, in the higher transonic range tile drag-creep appears. The multi-point design is shown to be an effective way to avoid the drag-creep and improve off-design performance which is very similar in the Euler design.

• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.14-19
• /
• 2007

We present a direct numerical simulation technique and some preliminary results of the capillary spreading of a droplet containing particles on the solid substrate. We used the level-set method with the continuous surface stress for description of droplet spreading with interfacial tension and employed the discontinuous Galerkin method for the stabilization of the interface advection equation. The distributed Lagrangian-multipliers method has been combined for the implicit treatment of rigid particles. We investigated the droplet spreading by the capillary force and discussed effects of the presence of particles on the spreading behavior. It has been observed that a particulate drop spreads less than the pure liquid drop. The amount of spread of a particulate drop has been found smaller than that of the liquid with effectively the same viscosity as the particulate drop.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.19-23
• /
• 2010

초임계 환경에서 작동하는 액체 로켓 엔진의 케로신 스월 인젝터에서 케로신 물성치에 따른 인젝터 내외에서의 분사 특성을 연구하였다. 케로신의 물성치를 계산하기 위해 surrogate 모델이 적용되었다. 난류 수치 모델은 large eddy simulation을 기반으로 하였으며 SRK 상태 방정식, Chung의 기법을 포함하고 있다. 초임계 환경의 수치 해석 결과는 천이 임계 조건의 결과와 비교되었으며 스월 인젝터 내부의 액막과 중심부 사이의 밀도 및 점성 계수 분포의 차이가 관찰되었다.

• 한국항공운항학회:학술대회논문집
• /
• 한국항공운항학회 2004년도 추계학술발표대회 논문집
• /
• pp.240-246
• /
• 2004

For the prediction on the onset of oblique shock wave-induced vortex breakdown, computational studies on the Oblique Shock wave/Vortex Interaction (OSVI) are conducted and compared with both experimental results and analytic model. A Shock-stable numerical scheme, the Roe scheme with Mach number-based function (RoeM), and a two-equation eddy viscosity-transport approach are used for three-dimensional turbulent flow computations. The computational configuration is identical to available experiment, and we attempt to ascertain the effect of parameters such as a vertex strength, streamwise velocity deficit, and shock strength at a freestream Mach number of 2.49. Numerical simulations using the ${\kappa}-{\omega}SST$ turbulence model and suitably modeled vortex profiles are able to accurately reproduce many fine features through a direct comparison with experimental observations. The present computational approach to determine the criterion on the onset of oblique shock wave-induced vortex breakdown is found to be in good agreement with both the experimental result and the analytic prediction.

• Korea-Australia Rheology Journal
• /
• 제17권4호
• /
• pp.199-205
• /
• 2005

Carbon dioxide was absorbed into aqueous polyethylene oxide (PEO) solution containing AMP in a flat-stirred vessel to investigate the effect of non-Newtonian rheological behavior of PEO on the rate of chemical absorption of $CO_2$, where the reaction between $CO_2$ and AMP was assumed to be a first-order reaction with respect to the molar concentration of $CO_2$ and AMP respectively. The liquid-side mass transfer coefficient, which was obtained from the dimensionless empirical equation containing the properties of viscoelasticity of the non-Newtonian liquid, was used to estimate the enhancement factor due to chemical reaction. PEO with elastic property of non-Newtonian liquid made the rate of chemical absorption of $CO_2$ accelerate compared with Newtonian liquid based on the same viscosity of the solution.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.52-57
• /
• 2001

Laminar two-dimensional time-dependent flow past a circular cylinder is numerically investigated using direct numerical simulation for the low Reynolds number (Re=164∼280). The higher-order finite difference scheme is employed for the spatial distributions along with the second order Adams-Bashforth and the first order backward-Euler time integration. The convection term is applied by the 7th order up wind scheme and the pressure and viscosity terms are applied by the 4th order central difference. The grid system makes use of the regular grid system and it is generated by an equation. The calculated results of drag coefficients, lift coefficients, pressure distributions, and vorticity contours and other information are compared with experimental and numerical ones. These results obtained by the present DNS show good agreement with the previous studies.

• 한국지구과학회지
• /
• 제40권4호
• /
• pp.392-405
• /
• 2019

Biogeochemical processes play an important role in ocean environments and can affect the entire Earth's climate system. Using an ocean-biogeochemistry model (NEMO-TOPAZ), we investigated the effects of changes in albedo and wind stress caused by phytoplankton in the equatorial Pacific. The simulated ocean temperature showed a slight decrease when the solar reflectance of the regions where phytoplankton were present increased. Phytoplankton also decreased the El $Ni{\tilde{n}}o$-Southern Oscillation (ENSO) amplitude by decreasing the influence of trade winds due to their biological enhancement of upper-ocean turbulent viscosity. Consequently, the cold sea surface temperature bias in the equatorial Pacific and overestimation of the ENSO amplitude were slightly reduced in our model simulations. Further sensitivity tests suggested the necessity of improving the phytoplankton-related equation and optimal coefficients. Our results highlight the effects of altered albedo and wind stress due to phytoplankton on the climate system.

• 천문학회보
• /
• 제44권2호
• /
• pp.47.3-47.3
• /
• 2019

In this talk, we present numerical simulations of driven hydrodynamic and magnetohydrodynamic (MHD) turbulence with weak/strong imposed magnetic fields. We mainly focus on turbulence driven compressively (∇ × f = 0). Our main goal is to examine how magnetic fields play a role in generating solenoidal modes in compressive turbulence. From our simulation analysis, we find that solenoidal energy densities in hydrodynamic and weak magnetic field cases are generated up to ~ 30% of total ones. On the other hand, in the case of strong magnetic fields, solenoidal energy densities are excited up to ~ 70%. To interpret the results, we further analyze vorticity (w = ∇ × u) equation and find that magnetic fields directly create solenoidal motions, and magnetic tension is most effective in this sense. In hydrodynamic simulations, however, we find that viscous dissipation provides vorticity seeds at the very early stage and they are amplified via stretching process. Lastly, in weak magnetic fields cases, we find that solenoidal motions are created by the effects of magnetic fields, viscosity, and stretching in conjunction.

• 대한화학회지
• /
• 제19권5호
• /
• pp.289-293
• /
• 1975

Dodecyl pyridinium chloride(DPC) 水溶液의 粘性度 및 密度硏究로 이 溶液에는 第一 cmc 外에 第二 cmc가 存在함을 알 수 있었다. 水化된 미셀의 부피分率${\phi}_m$은 다음 式에 따라 算出하였다. ${\Pi}_{rm}=1+2.5{\phi}_m+14.1{\phi}_m^2{\cdot}{\phi}_m-C_m$ 曲線에서 ${\phi}_m$m의 增加率은 第二 cmc 近處에서 減少되고 또 密度測定으로부터 얻은 partial specific volume($\={v}$)도 第二 cmc 近處에서 급격히 減少되고 그以上의 濃度에서는 一定値를 維持함을 알았다. 이것은 미셀의 集合型의 變化 및 미셀과 結合하고 있는 반대이온의 減少로 因한 第二 cmc에서의 미셀構造變化에 依한 것이라고 생각된다.

• Journal of Biosystems Engineering
• /
• 제17권3호
• /
• pp.229-236
• /
• 1992

In an effort to localize the spray-dryer which is markedly used for drying food materials, a experiment was carried out with a wheel type atomizer locally designed and manufactured to evaluate the effect of rotational speed, feed rate and physical properties of liquid food material on the droplet size, and to develop a model to predict the droplet size sprayed at various operational conditions. The result are summarized as follows. 1. The frequency of droplet size sprayed from the atomizer at every treatment were similar to normal distributions. 2. Under the test conditions adopted in this study, that is, rotational speed of the atomizer ranging from 15,000 to 20,000 rpm (55.0 m/sec - 73.3 m/sec), feed rate from 14 to 37 kg/hr and viscosity of the material from 1.14 to 350 cP, the mean volume-surface dia. of droplets was decreased as increase in rotational speed and was not affected significantly by the feed rate and viscosity. 3. Through the dimensional analysis, a prediction model was developed as follows : $$\frac{Dvs}{r}=K[\frac{Q}{{\mu}r}]^a[\frac{rN^2}{g}]^b[\frac{{\rho}^2r^3g}{{\mu}^2}]^c[\frac{L}{r}]^d$$ and it was proved that the above model was better in degree of fitness than other models reported. 4. A prediction equation for the droplet size sprayed from the atomizer under the test was expressed as follows : $$\frac{Dvs}{r}=0.0215[\frac{Q}{{\mu}r}]^{0.06}[\frac{rN^2}{g}]^{0.3314}[\frac{{\mu}^2}{{\rho}^2r^3g}]^{0.0158}$$.