• Tribology and Lubricants
• /
• 제7권1호
• /
• pp.55-60
• /
• 1991

The emulsion lubrication is expected to get the effects of cooling and lubrication in metal cutting. The purpose of this research was to investigate the lubrication characteristics of the emulsion in a region of the elastohydrodynamic lubrication by experiments using o/w type emulsion lubrication. With the line contact frictional experiment apparatus which is the model of a rolling mechanism, friction coefficient, and oil film thickness were measured. By analyzing these experimental data with the variables of emulsion concentration, load, and rolling velocity, the following results are obtained. Emulsion viscosity $\eta$ for the concentration and pressure can be calculated by the following equation $\eta=\eta_o e^{\alphap}\cdot e^{\beta \phi}$. Where $\beta = (-3.7242+\phi)/\phi, 5%\leq \phi \leq 15%$.

• 대한기계학회논문집
• /
• 제7권2호
• /
• pp.175-185
• /
• 1983

When a circular cylinder near the plane fluid-interface of different viscosities is in parallel and normal motion, solutions of the Oseen equation are obtained. Classical image method with Faxen's integral form is used to satisfy the boundary conditions on the plane interface. Coefficients of drag and lift increase as a cylinder approaches to the interface. But drag-coefficients of parallel motions with viscosity-ratio less than unity are decreased slightly. They show monotonic increase with Reynolds number in case of parallel motion, but minimum values of drag coefficients in normal motion are appeared. On the other hand Stokes' solution are obtained by taking limits of low Reynolds number except the case of parallel motion with viscosity-ratio not equal to infinity.

• 대한수학회보
• /
• 제48권4호
• /
• pp.737-757
• /
• 2011

This work is concerned with an optimal selling rule for a large position of stock in a market. Selling a large block of stock in a short period typically depresses the market, which would result in a poor filling price. In addition, the large selling intensity makes the regime more likely to be poor state in the market. In this paper, regime switching and depressing terms associated with selling intensity are considered on a set of geometric Brownian models to capture movements of underlying asset. We also consider the liquidation strategy to sell much smaller number of shares in a long period. The goal is to maximize the overall return under state constraints. The corresponding value function with the selling strategy is shown to be a unique viscosity solution to the associated HJB equations. Optimal liquidation rules are characterized by a finite difference method. A numerical example is given to illustrate the result.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.393-398
• /
• 1990

A method is proposed which can be used to obtain the fibesr content distribution of compression molded long fiber-reinforced thermoplastic sheet for nonisothermal state. The fiber is modelled to be a sphere. Once the one-dimensional unsteady state heat conduction equation in solved, the mean temperature in defined across the thickness direction. The viscosity of matrix is determined with the mean temperature. Using the obtained viscosity, two-dimensional sheet0like part compression molding is simulated with the finite element method. Comparison with experiments shows that the method accurately predicts the distribution.

• 대한기계학회논문집B
• /
• 제20권9호
• /
• pp.2909-2915
• /
• 1996

Precise and accurate pressure measurements are obtained using deadweight piston gauges. Pressure distribution and elastic distortion in the piston-cylinder unit are the leading factors in determination of effective area. The distortion depends upon the pressure distribution in the clearance between piston and cylinder and those are coupled each other. Considering the viscosity pressure relation of oil and governing flow equation in the clearance, a new numerical iterative algorithm is developed. The disagreement between the monotonous and sharp pressure profiles is an indication that the pressure profile will be different for each piston and cylinder unit due to material variances.

• Journal of Mechanical Science and Technology
• /
• 제16권4호
• /
• pp.522-531
• /
• 2002

In order to study the thermal-hydraulic behavior of the cable-in-conduit-conductor (CICC), a numerical model has been developed. In the model, the high heat transfer approximation between superconducting strands and supercritical helium is adopted. The strong coupling of heat transfer at the front of normal zone generates a contact discontinuity in temperature and density. In order to obtain the converged numerical solutions, a moving mesh method is used to capture the contact discontinuity in the short front region of the normal zone. The coupled equation is solved using the finite element method with the artificial viscosity term. Details of the numerical implementation are discussed and the validation of the code is performed for comparison of the results with thse of GANDALF and QSAIT.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.529-534
• /
• 2009

This paper reports a non-photorealistic rendering method for creating stream pattern from an input image. Our method extracts potential stream pattern in the given image. The proposed approach uses a shock filter based on a partial difference equation(PDE) which is implemented by applying a selective dilation and erosion processes. However, unlike the traditional first order solution to the PDE, we employ a second order scheme and compensate for the undesired diffusive effects caused by a viscosity form. The selection of dilation or erosion for a pixel is based on an edge detector computed from a structure tensor. By adding noises on to the input image, our method also can generate stream pattern even if there is less texture in some area. The experimental results show that the stream pattern is extracted very well.

• International Journal of Fluid Machinery and Systems
• /
• 제8권1호
• /
• pp.36-45
• /
• 2015

Oil and gas industry pumps viscous fluids and investigation of flow physics is important to understand the machine behavior to deliver such fluids. 3D numerical flow simulation and analysis for different viscous fluids at different rotational speeds of a centrifugal impeller have been reported in this paper. Reynolds-averaged Navier Stokes (RANS) equations were solved and the performance analysis was made. Standard two equation k-${\varepsilon}$ model was used for the turbulence closure of steady incompressible flow. An inlet recirculation and reverse flow in impeller passage was observed at low impeller speeds. It was also found that the higher viscosity fluids have higher recirculation which hinders the impeller performance.

• 대한화학회지
• /
• 제15권2호
• /
• pp.85-93
• /
• 1971

Apparent molal valumes ${\phi}_v$ and relative viscosities ${\eta}_r$ of aqueous solutions of anilinium chloride have been determined at two degree intervals from 20 to $50^{\circ}C$ in the molar concentration range 0.003 < C < 0.4. The results are discussed in terms of partial molal volumes $\={V}^{\circ}$, deviations from the Debye-H$\''{u}$ckel limiting law, partial molal expansibilities $\={E}^{\circ}$, viscosity B coefficients calculated from the Jones-Dole equation, and energy of activation for viscous flow. In aqueous solution, anilinium chloride was found to be a weak structure-maker due to its hydrophobic group.

• Journal of Korean Society for Atmospheric Environment
• /
• 제9권E호
• /
• pp.347-357
• /
• 1993

The Lagrangian grid-free numerical method, the discrete vortex method, was applied to solve the Navier-Stokes euqations. This method avoids the introduction of numerical viscosity swamping the real physical viscosity at high Reynolds number, unlike Eulerian method, e.g. finite difference and element methods. The boundary integral equation method for the potential flow solution was included to make the discrete vortex method more feasible for complex geometries. The fast adaptive multipole expansion method was incorporated to reduce the computational time from $O(N^2)$ to O(N) for the computations of vortex-vortex interactions. The test problems were air flow around one circular cylinder and two circular cylinders in tandem with various gaps. The numerical results were in excellent gareement with the experimental and other computational results. The applicabilty of the method was discussed with the indoor and the outdoor air pollution problems, especially the contaminant transport in the recirculation regions.