• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.12
• /
• pp.1738-1746
• /
• 2002

In the FSI (Fluid-Structure Interaction) problems, two different governing equations are to be solved together. One is fur the fluid and the other for the structure. Furthermore, a kinematic constraint should be imposed along the boundary between the fluid and the structure. We use the combined formulation, which incorporates both the fluid and structure equations of motion into a single coupled variational equation so that it is not necessary to calculate the fluid force on the surface of structure explicitly when solving the equations of motion of the structure. A two-dimensional channel flow divided by a Bernoulli-Euler beam is considered and the dynamic response of the beam under the influence of channel flow is studied. The Navier-Stokes equations are solved using a P2P1 Galerkin finite element method with ALE (Arbitrary Lagrangian-Eulerian) algorithm. The internal structural damping effect is not considered in this study and numerical results are compared with a previous work fer steady case. In addition to the Reynolds number, two non-dimensional parameters, which govern this fluid-structure system, are proposed. It is found that the larger the dynamic viscosity and density of the fluid are, the larger the damping of the beam is. Also, the added mass is found to be linearly proportional to the density of the fluid.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.386-389
• /
• 2001

In this study, development of a new LTCC material using non-glassy system was attempted with repsect to reducing the fabrication process steps and cost down. Lowering the sintering temperature can be achieved by liquid phase sintering. However, presence of liquid phases usually decrease dielectric properties, especially the quality factor. Therefore, the starting material must have quality factor as high as possible in microwave frequency range. And also, the material should have a low dielectric constant for enhancing the signal propagation speed. Regarding these factors, dielectric constants of various materials were estimated by the Clausius-Mosotti equation. Among them, $ZnWO_4$ was turned out the suitable LTCC material. $ZnWO_4$ can be sintered up to 98% of full density at $1050^{\circ}C$ for 3 hours. It's measured dielectric constant, quality factor, and temperature coefficient of resonant frequency were 15.5, 74380GHz, and $-70ppm/^{\circ}C$, respectively. In order to modify the dielectric properties and densification temperature, $B_{2}O_{3}$ and $V_{2}O_{5}$ were added to $ZnWO_4$. 40 mol% $B_{2}O_{3}$ addition reduced the dielectric constant from 15.5 to 12. And the temperature coefficient of resonant frequency was improved from -70 to $-7.6ppm/^{\circ}C$. However, sintering temperature did not change due to either lack of liquid phase or high viscosity of liquid phase. Incorporation of small amount of $V_{2}O_{5}$ in $ZnWO_{4}-B_{2}O_{3}$ system enhanced liquid phase sintering. 0.1 wt% $V_{2}O_{5}$ addition to the $0.6ZnWO_{4}-0.4B_{2}O_{3}$ system, reduced the sintering temperature down to $950^{\circ}C$. Dielectric constant, quality factor, and temperature coefficient of resonant frequency were 9.5, 16737GHz, and $-21.6ppm/^{\circ}C$, respectively.

• The Korean Journal of Rheology
• /
• v.6 no.1
• /
• pp.30-40
• /
• 1994

고분자 물질의 신장점도를 측정하기 위하여 설계된 수렴관을 지나는 시험 유체 M1 에대하여 유한요소방법으로 수치모사를 수행하였다. 구성방정식은 세 개의 이완시간을 가진 적분형 K-BKZ모형을 사용하였다. 신장변형이 지배적이고 변형속도가 매우 큰 흐름에 대하 여 실험적 방법으로 측정이 가능한 범위까지 수치모사를 수행하였다. 두 개의 압력 측정꼬 지 사이의 벽면 압력차에 대하여 압력 신호로 측정한 실험값을 수치모사결과와 비교하였다. 걷보기 전단속도가 매우 큰 1300s-1에 이르는 높은 유속의 전 실험범위에 대하여 안정된 수 치해를 얻을수 있었다. 3$0^{\circ}C$에서는 모든 실험범위의 유속에서 압력차에 대한 수치모사 결과 가 실험값과 잘일치했다. 21$^{\circ}C$에서는 0.1$\times$10-3m3/s보다 낮은 유속범위에서 실험값과 일치하 는 결과를 얻었으나 그보다 높은 유속에서 실험값과 일치하는 결과를 얻었으나 그보다 높은 유속에서 실험값과 다른 경향의 결과를 얻었다. 이것은 낮은 온도 높은 유속 조건에서 M1 유체의 성질이 불안정하고 또한 그러한 조건의 실험에서 발생한 압력 측정꼭지 부근의 기포 들이 정확한 압력측정에 영향을 끼쳤기 때문이다. 수치모사 결과로부터 얻은 압력과 응력분 포로부터 수렴관 유변측정기의 유동특성을 밝힐수 있었다. 이는 실험적 방법을 통해서는 얻 기 어려운 결과들로서 중요한의미를 가진다. 특별한 모양을 갖도록 설계된 수렴관을 통과하 는 M1 유체가 중심부근에서 일정한 신장변형속도로 변형됨을 확인할 수 있었으며 수직응력 은 지수적으로 증가하다가 축소부분을 지난 후 매우 장점도를 얻기 위하여 신장변형속도가 일정한 구역이 두 배로 확장된 수렴관이 수치적으로 다루어졌고 이를 통하여 기존의 수렴관 에서 구한 값보다 큰 신장점도를 얻을 수 있었다.

• International Journal of Highway Engineering
• /
• v.3 no.2 s.8
• /
• pp.91-102
• /
• 2001

On the basis of several experiments peformed, Bahia et al. (1998) concluded that the current Superpave PG-grading system failed to characterize grading specification of fill modified binders. This conclusion motivates us to investigate the correct grating system suited for modified asphalt binders. The main concept of this development is originated from the relationship between rut depth and binder properties at high temperatures. A new grading system for modified asphalt binders suggested here somewhat resembles to the unmodified binder grading one developed by Huh et al. (2000). Thus, this investigation will provide a unified single theoretical equation of high temperature grading that can apply both to modified and unmodified binders, and will check its effectiveness with the laboratory and the field rut data reported by independent studies. Successful results observed may allow to construction of a correct grading system in the near future.

• Journal of the korean society of oceanography
• /
• v.37 no.3
• /
• pp.169-177
• /
• 2002

An eddy-resolving free-surface primitive-equation model with nonlinear terrain-following coordinates is established to study the exchange of water masses among the Asian marginal seas and their adjacent waters. A curvilinear coordinate system is used to generate the horizontal grid with a variable resolution for the regional oceans from $5^{\circ}$S to $45^{\circ}$N and $100^{\circ}$E to $155^{\circ}$E. The higher resolution region has about a 10 km by 10 km grid covering the complex geometry of the coastal marginal seas, while the lower resolution region has about a 30 km by 30 km grid covering the eastern Pacific. The model is initialized by the Levitus annual climitology and forced by the monthly mean air-sea fluxes of momentum, heat, and freshwater derived from the Comprehensive Ocean-Atmosphere Data Set. High-resolution and low-viscosity are identified as the key factors for a better representation of the exchange of waters through narrow straits and passages between the marginal seas and their adjacent waters. The dynamics of the loop currents and eddies in the South China Sea and Celebes Sea are examined in detail. It has found that the anticyclonic loop and detached eddies from the Kuroshio through the Luzon Strait play an important role in transporting warm and salty water into the South China Sea, while the cyclonic circulation of the Mindanao Current in the Celebes Sea plays a role in contributing cold water to the Indonesian throughflow. The deep undercurrent of the western Pacific is shown to provide fresher water to the South China Sea and Celebes Sea. These modeling results suggest that the exchange processes via the narrow straits and passages are of fundamental importance to the maintenance of water masses for the marginal sea region.

• Korean Journal of Food Science and Technology
• /
• v.16 no.4
• /
• pp.451-456
• /
• 1984

Rheological properties of gelatinized rice starch solutions were investigated with Brookfield rotational viscometer. The 8% starch solution showed thixotropic behavior with yield stress. The alkali gelatinized starch was more thixotropic than the thermal gelatinized one. The time dependent characteristics of starch solutions followed Tiu's model. The value of rate constant $(a_1)$ in Tiu's model increased linearly with shear rate, and was exponentially dependent on concentration and temperature. Temperature dependency of rate constant and apparent viscosity followed Arrhenius type equation and the activation energy were about 14.3 and 6.8 Kcal/g mole, respectively. The $a_1-value$ was found to be useful to evaluate changes in structaral decay on the shearing time of gelatinized rice starch solutions.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.177-185
• /
• 2001

In this work, the cure kinetics and rheological properties of difunctional epoxy(diglycidylether of bisphenol A, DGEBA)/polysulfone (PSF) blends were investigated using differential scanning calorimeter and rheometer. From the DSC results of the blends, the temperature of the exothermic peak and cure activation energy (E) using a half-width method were increased with increasing the PSF content to neat epoxy resin up to 30 wt%. However, a marginal decrease in the blend system was shown in E. The conversion ($\alpha$) and conversion rate (d$\alpha$/dt) were decreased as the content of PSF increases. Rheological properties of the blend system were investigated under isothermal condition using a rheometer. Cross-linking activation energy (E$_{c}$) was determined from the Arrhenius equation based on gel time and curing temperature. As a result, the E$_{c}$ showed a similar behavior with E which could be resulted from high viscosity of PSF and the phase separation between DGEBA and PSF.PSF.f PSF and the phase separation between DGEBA and PSF.PSF.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.629-637
• /
• 2000

Dispersion polymerization of acrylamide in the media of t-butyl alcoho1/$H_2O$ mixtures at 30~5$0^{\circ}C$ in the presence of hydroxypropyl cellulose and ammonium persulfate as steric stabilizer and initiator, respectively, was carried out. It was studied the effects of concentrations of initiator and steric stabilizer, amount of monomer, polymerization temperature, t-butyl alcohol/$H_2O$ ratio, concentration of crosslinker, purification of monomer and nitrogen purge on the particle size of the resulting acrylamide latices and molecular weight of the latex-poly(acrylamide). In this study, poly(acrylamide) latices of 0.1~0.5 ${\mu}{\textrm}{m}$ with 470000~2080000 in (equation omitted) were prepared and the resulting PAM latices were all dissolved in water in stantly.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1052-1058
• /
• 1996

The effect of varietal differences of rice starches by amylose content and gel consistency on the retrogradation behavior was studied. Setback viscosity of rice flour measured in a Brabender amylograph was significantly affected by amylose content as well as gel consistency. Increase in the rigidity modulus (E) of rice starch gels during storage determined by using texture analyzer indicated that amylose content was an important factor in terms of hardness increase. Kinetics of retrogradation showed that time constant of rice starch gels was influenced by amylose content, but not by gel consistency.

• Journal of the Korean Chemical Society
• /
• v.20 no.4
• /
• pp.260-265
• /
• 1976

The conductances of dilute solutions of LiCl, NaCl and KCl in a series of isopropanol-water mixtures were determined at $30^{\circ}C$. The values of equivalent conductance agreed well with Debye-Huckel-Onsager equation and the limiting equivalent conductance was greatly reduced as the isopropanol content of the solvent was increased in accord with predictions based on solvent viscosity and dielectric properties. Also, the limiting equivalent conductance increased in sequence ${\Lambda}_{0,LiCl} < {\Lambda}_{0,NaCl} < {\Lambda}_{0,KCl} in 0.0, 0.1 and 0.2 mole fraction isopropanol, but {\Lambda}_{0,LiCl} < {\Lambda}_{0,KCl} < {\Lambda}_{0,NaCl} in 0.3 mole fraction ispropanol. The maximum Walden product, {\Lambda}_{0{\eta}0}$ was found in 0.1 mole fraction isopropanol for all electrolytes.