• 한국환경보건학회지
• /
• 제27권1호
• /
• pp.36-43
• /
• 2001

Chitosans were prepared from red crab chitin under various alkali treatment conditions(different alkali concentrations, reaction times and temperatures) and theirphysicochemical properties were investigated. The nitrogen content and deacetylation degree of red crab chitin were 6.15% and 22.17A%, respectively. By the IR spectra, red crab and reference chitin showed the sharp bands at 1650 $cm^{-1}$ / and 1550 $cm^{-1}$ /, which are characteristic of chitin. The nitrogen contents of prepared chitosans ranged from 6.19~7.48%. Thedeacetylation degree was increased from 63~76% and 48~78% with increasing reaction time and temperature, whereas viscosity was decreased. The nitrogen content and yield of red crab chitosan perpared from chitin with 50% NaOH, 1:25(w/v) for 3.0 hr at 120$cm^{-1}$ / were 7.26% and 85.0%, respectively. and viscosity, deacetylation degree and molecular weight, 67.0 mPa.s, 75.0% and 6.5$\times$10$^{5}$ Dalton, respectively. From the IR spectra, the amide absorption bands of red crab and reference chitosan became very weak, similarly. And at solid state $^{13}$ C-NMR spectra, C=O(carbonyl carbon) signals absent, whereas $CH_3$(methyl carbon) was residues. Chemical shift of $^{13}$ C-NMR spectra of red crab and reference chitosans were in good agreement with slight experimental deviation.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.935-944
• /
• 2003

Forced convective boiling heat transfer coefficients were predicted for an annular flow inside a horizontal tube for pure refrigerants and nonazeotropic binary refrigerant mixtures. The heat transfer coefficients were calculated based on the turbulent temperature profile in liquid film and vapor core considering the composition difference in vapor and liquid phases, and the nonlinearity in mixing rules for the calculation of mixture properties. The heat transfer coefficients of pure refrigerants were estimated within a standard deviation of 14% compared with available experimental data. For nonazeotropic binary refrigerant mixtures, prediction of the heat transfer coefficients was made with a standard deviation of 18%. The heat transfer coefficients of refrigerant mixtures were lower than linearly interpolated values calculated from the heat transfer coefficients of pure refrigerants. This degradation was represented by several factors such as the difference between the liquid and the overall compositions, the conductivity ratio and the viscosity ratio of both components in refrigerant mixtures. The temperature change due to the concentration gradient was a major factor for the heat transfer degradation and the mass flux itself at the interface had a minor effect.

• 공업화학
• /
• 제3권4호
• /
• pp.614-619
• /
• 1992

Soft segment가 각각 ester 및 ether형 polyol로된 2종의 polyurethane(PU) ionomer를 emulsion 블렌딩하여, 블렌드의 분산점도, 및 emulsion cast film의 접촉각, 기계적 특성을 조성의 함수로 측정하였다. 블렌드의 기계물성은 혼합법칙으로부터 심한 scattering이나, negative deviation을 보였으며, 이는 ester 및 ether형 polyol간의 상용성의 결여에 기인하는 것으로 보았다. 접촉각 측정 결과로부터 유화입경이 작은 PPG PU 입자가 주로 도막표면층을 형성하는 것을 확인할 수 있었다.

• 대한화학회지
• /
• 제24권3호
• /
• pp.209-217
• /
• 1980

요소 1,3-디메틸요소(DMU), 아세트아미드, 프로피온아미드의 상대점도와 삼투계수를 dimethylsulfoxide(DMSO), 메탄올, 에탄올 및 물용액에서 $25^{\circ}$C와 $45^{\circ}$C에서 각각 측정하였다. 수용액에서 각 용질의 점도증가량은 분몰랄부피가 증가하면서 증가하였으나 물아니 용액에서는 오히려 감소하였다. 또한 요소의 점도 증가량은 수용액에서는 DMU보다 작았으나, 물아닌 용액에서는 DMU보다 컸다. 그러나 아미드류는 어느 용매에서나 거의 같은 점도증가량을 나타내었다. 요소수용액에서 삼투계수는 DMU 수용액보다 컸으며, 물아닌 용액에서 요소용액은 DMU보다 Raoult의 법칙에서 크게 벗어났다. 이러한 사실로부터 요소는 DMSO 용액에서 자체회합을 크게 일으키고 있으며 알코올용액에서는 DMU보다는 큰 정도의 용매-용질상호작용, 수용액에서는 용매구조를 파괴하고 있음을 알았다. 아세트아미드나 프로피온아미드는 수용액이나 DMSO 용액에서보다 알코올용액에서 더 크게 용매구조를 파괴하고 있음을 알았다.

• 한국식품과학회지
• /
• 제27권5호
• /
• pp.799-806
• /
• 1995

고유점도가 3.75 dL/g인 감귤류 펙틴 용액의 전단점도 및 점탄성에 대한 농도의존성을 연구하였다. 전형적인 자수법칙 흐름 현상이 2.0% 이상의 펙틴 농도에서 관찰되었으며, 전단점도의 전단속도 의존성은 농도의 증가에 따라 더욱 뚜렷하게 나타났다. ${\eta}_{sp.o}$ 대 $C[\eta]$를 양대수 좌표에 그렸을 때 묽은 영역에서 진한 영역으로의 전이를 나타내는 $C^{*}[\eta]$는 약 4.0이었으며, 이때 ${\eta}_{sp.o}$의 값은 약 10.0을 나타내었다. 묽은 용액$(C[\eta]과 진한 용액$(C[\eta]>C^{*}[\eta])$에서 ${\eta}_{sp.o}$ $C[\eta]$의 기울기는 각각 1.1과 4.5였다. 전단점도를 ${\eta}/{\eta_0}$ 대 ${\gamma}/{\gamma}_{0.8}$에 대하여 그렸을 때 $2{\sim}5%$의 농도에서는 잘 중첩되었으나, 6%의 고농도에서는 중첩곡선에서 벗어나는 현상을 보였다. 펙틴 용액의 점탄성을 조사한 결과 전 농도범위에서 손실탄성률$(G^{\prime\prime})$의 값이 저장탄성률$(G^\prime)$보다 훨씬 높은 값을 보여 점성이 전체 점탄성을 지배하는 것으로 나타났다. 저 농도에서 전단점도는 복소점도와 거의 비슷한 값을 보여 Cox-Merz 법칙에 잘 부합하였으나, 농도가 높아질수록 두 값은 차이를 보였다.

• 한국세라믹학회지
• /
• 제36권9호
• /
• pp.991-996
• /
• 1999

Effect of solution property on the weight varation and microstructural change of film was studied by electrophoretic deposition in order to obtain a homogeneous and dense zirconia film. As a result of weight kinetics of film which obtained in alcohol or aqueous solution having different polarity experimental data showed large deviation from theoretical ones calculated by Zhang's kinetic model. It had been shown that the weight affecting factors was largely dependent on properties other than dielectric constant and viscosity of solvent zeta potential appiled field and time. In initial stage a main factor of the drastic weight increase was the capillary drag of porous substrate. The cause of weight decrease with time in aqueous solution after 300 s was attributed to the defect of film by sagging and electrolytic reaction. The electrolyte film which prepared in alcohol solution with good wetting for substrate had better homogeneous and dense microstructure than one in aqueous solution with high surface tension.

• 공업화학
• /
• 제30권4호
• /
• pp.445-452
• /
• 2019

Shear thickening is an intriguing phenomenon in the fields of chemical engineering and rheology because it originates from complex situations with experimental and numerical measurements. This paper presents results from the numerical modeling of the particle-fluid dynamics of a two-dimensional mixture of colloidal particles immersed in a fluid. Our results reveal the characteristic particle behavior with an application of a shear force to the upper part of the fluid domain. By combining the lattice Boltzmann and discrete element methods with the calculation of the lubrication forces when particles approach or recede from each other, this study aims to reveal the behavior of the suspension, specifically shear thickening. The results show that the calculated suspension viscosity is in good agreement with the experimental results. Results describing the particle deviation, diffusivity, concentration, and contact numbers are also demonstrated.

• 한국해안해양공학회지
• /
• 제4권2호
• /
• pp.91-107
• /
• 1992

Heaps(1972)가 사용한 천해균질류에 대한 선형 기본방정식을 수심평균류속과 해수면변리를 계산하는 External mode와 수심변이 유속을 계산하는 Internal mode로 분리시킨 다음, Internal mode식에 Galerkin Method를 적용하였다. Internal mode유속을 수평좌표, 시간에 따라 변하는 계수와 대직좌표에 따라 변하는 Basis function들의 곱의 형태로 선형전개하며, 난류확산계수를 포함하는 2차미분항으로부터 해수면에 Homogeneous boundary condition과 해저면에 Sheared boundary condition이 가해지는 Sturm-Liouville system을 구성, Eigenfunctions 해를 구하여 Basis function으로 사용하였다. 모델의 성능을 검토하기 위하여 수립된 모델을 정상균일풍이 가해지는 1차원 수노에 적용하여 Cooper and Pearce(1977)가 제시한 해저면 비활동조건하의 무한 및 유한수노 연직류원분포에 대한 해석각와 비교하였으며, North Sea 규모의 등수심 장방형 Basin(Heaps' Basin)에 적용하여 정상균일풍에 대한 Heaps(1972)의 계산결과와 비교하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.467-471
• /
• 2005

In this paper, experimental methods about the flow behavior of thin polymer film by various edge patterns in the spin coating process for stable cover layer coating of a blu-ray disc is described. The blu-ray disc, a next-generation optical disc format over 25GB, consists of a 1.1m thick substrate and a 0.1mm tick cover layer. Generally, cover layer on the blu-ray disc is made by the polymer spin coating process. However, it is hard to secure sufficient coating uniformity around the rim on the cover layer. In order to get the uniform thickness deviation and to minimize the bead around the rim, the edge of the disc substrate can be modified into various patterns, such as normal plain, trench, step and chamfer pattern, etc, around the rim on the disc and experimented with various parameters, such as surface tension, viscosity, coating time, temperature and rotation speed, etc. And the optimal shape of the rim was tried to get by 3 dimensional computer simulation of the polymer expulsion process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3282-3285
• /
• 1999

Fluid characteristics at microscale were tried to be solved in this paper by showing how they deviate with conventional flow governing equations. (e.g. Navier-Stokes Equation) In earlier studies, this deviation phenomena was caused because of omitting no slip flow condition, micropolar effect and EDL(Electric Double Layer)effect of fluid which are usually negligible at macroscaled phenomena. The characteristics of fluid flow were tried to be studied by measuring pressure difference of specified length of the channels using the almost squared micromachined channels. By acquiring pressure difference, we could drive different values (viscosity, flow velocity. etc) from it and these data will be compared with macroscaled flow characteristics. As making microchannel is not easy work and that our knowledge is at mere stage, we had to fail to make it in this time. The hardest thing in this work is to make a hole which is directly connected with channel. The more efficient and easy way of making microchannel is proposed in this paper.