• Interaction and multiscale mechanics
• /
• 제2권3호
• /
• pp.321-332
• /
• 2009

Recent development in composites containing phase-transforming particles, such as vanadium dioxide or barium titanate, reveals the overall stiffness and viscoelastic damping of the composites may be unbounded (Lakes et al. 2001, Jaglinski et al. 2007). Negative stiffness is induced from phase transformation predicted by the Landau phase transformation theory. Although this unbounded phenomenon is theoretically supported with the composite homogenization theory, detailed stress analyses of the composites are still lacking. In this work, we analyze the stress distribution of the Hashin-Shtrikman (HS) composite and its two-dimensional variant, namely a circular inclusion in a square plate, under the assumption that the Young's modulus of the inclusion is negative. Assumption of negative stiffness is a priori in the present analysis. For stress analysis, a closed form solution for the HS model and finite element solutions for the 2D composite are presented. A static loading condition is adopted to estimate the effective modulus of the composites by the ratio of stress to average strain on the loading edges. It is found that the interfacial stresses between the circular inclusion and matrix increase dramatically when the negative stiffness is so tuned that overall stiffness is unbounded. Furthermore, it is found that stress distributions in the inclusion are not uniform, contrary to Eshelby's theorem, which states, for two-phase, infinite composites, the inclusion's stress distribution is uniform when the shape of the inclusion has higher symmetry than an ellipse. The stability of the composites is discussed from the viewpoint of deterioration of perfect interface conditions due to excessive interfacial stresses.

• Structural Engineering and Mechanics
• /
• 제51권2호
• /
• pp.277-297
• /
• 2014

Since the isolation bearings undergo large displacements in base-isolated structures, impact with adjacent structures is inevitable. Therefore, in this investigation, the effect of impact on seismic response of isolated structures mounted on double concave friction pendulum (DCFP) bearings subjected to near field ground motions is considered. A non-linear viscoelastic model of collision is used to simulate structural pounding more accurately. 2-, 4- and 8-story base-isolated buildings adjacent to fixed-base structures are modeled and the coupled differential equations of motion related to these isolated systems are solved in the MATLAB environment using the SIMULINK toolbox. The variation of seismic responses such as base shear, displacement in the isolation system and superstructure (top floor) is computed to study the impact condition. Also, the effects of variation of system parameters: isolation period, superstructure period, size of seismic gap between two structures, radius of curvature of the sliding surface and friction coefficient of isolator are contemplated in this study. It is concluded that the normalized base shear, bearing and top floor displacement increase due to impact with adjacent structure. When the distance between two structures decreases, the base shear and displacement increase comparing to no impact condition. Besides, the increase in friction coefficient difference also causes the normalized base shear and displacement in isolation system and superstructure increase in comparison with bi-linear hysteretic behavior of base isolation system. Totally, the comparison of results indicates that the changes in values of friction coefficient have more significant effects on 2-story building than 4- and 8-story buildings.

• 한국전산구조공학회논문집
• /
• 제29권5호
• /
• pp.377-388
• /
• 2016

이 연구는 기초의 묻힘이 면진 원전구조물의 응답에 미치는 효과를 지표기초와 비교하여 평가하였다. 면진장치의 비선형성을 고려한 비선형 SSI 해석은 진동수영역해석과 시간영역해석의 복합법인 경계반력법(BRM)을 이용하여 수행하였다. BRM 해석모델은 BRM을 이용한 등가선형 SSI 해석결과를 재래의 주파수영역 SSI 해석결과와 비교함으로 검증하였다. 마지막으로 비선형 SSI해석에 의한 묻힌기초 모델의 면진장치의 변위 및 구조물 응답을 지표기초의 해석결과와 비교하였다. 비교결과, 면진장치의 변위응답은 묻힌기초효과를 고려할 경우 감소할 수 있음을 알 수 있었다.

• 대한후두음성언어의학회지
• /
• 제16권1호
• /
• pp.68-75
• /
• 2005

The treatment of sulcus vocalis and vocal bowing has been commonly used Thyroplasty Type surgery or injection within vocal folds such as Teflon, silicone, collagen. However, and treatment has not been acquired satisfactory treatment effect. This study was conducted to demonstrate voice therapy effect using singer's vocal technique and respiratory training. 4 patients (1 male, 3 females) with sulcus vocalis or bowing, with or without scar were selected for this study and we compared with acoustic, aerodynamic measures and stroboscopy observation before and after voice therapy. The results showed that 1) case 1 (48yr, male) with sulcus vocalis decreased F0 (Fundamental Frequency), increase CQ(Close Quotient) and high degree of satisfaction but not improved voice quality after voice therapy. 2) case 2(19yrs, femal) with mild sulcus vocalis improved as normal voice quality after voice therapy. 3) case 3(38yrs, female) with functional bowing showed abnormalvocal contact before therapy whereas CQ was increased after voice therapy. 4) case 4(27yrs, female) with vocal atrophy and vocal bowing changed normal range of Fo and increased CQ after voice therapy. Even though contact area of both vocal folds was increased and lowered F0 after voice therapy, current outcomes revealed that normal voice quality was not regained. These results might signify that it was difficult that vocal folds couldn't be recovery of symmetry and viscoelastic property of mucosal wave through voice therapy. However, it was difficult for this study to maintain voice therapy so that evaluate effect of voice therapy for long-term. Further study will be needed to long-term follow-up for voice therapy with these patients.

• 에너지공학
• /
• 제18권2호
• /
• pp.87-92
• /
• 2009

본 논문은 안쪽축이 회전하는 동심환형관 물과 비뉴튼유체의 고-액 2상 유동연구를 수행하였다. 점탄성유체의 유변학은 굴착구멍의 청결, 입자의 밖으로 수송하는 등 여러 가지 응용에 중요하다. 연구에서 투명한 아크릴관은 고체입자의 이동을 관찰하기 위하여 사용하였다. 환형관 속도는 0.3m/s에서 2.0m/s로 변한다. 머드시스템은 물과 CMC 수용액을 혼합하여 사용하였다. 연구에서 고려된 주요 변수들은 축회전속도, 유체 유동영역과 입자 주입율이다. 입자이송속도와 압력강하는 유체유량(Q, LPM)이 5~30의 범위에서 측정하였다. 물과 0.2% CMC 수용액에서 고체입자의 농도가 높을수록 압력손실이 커짐을 알 수 있었다.

• 센서학회지
• /
• 제5권4호
• /
• pp.71-79
• /
• 1996

Indium tin oxide(ITO) 전극을 스파터링 법으로 피막시킨 9 MHz 수정진동자를 작용전극으로 사용하여 피롤을 전기화학적으로 중합시키면서, 수정진동자의 공진주파수 변화로 부터 중합량을 분석하고 공진저항의 변화로부터 막의 점탄성 변화를 분석함으로써 중합막의 유변학적 변화를 해석하였다. 본 실험에서 피롤막이 중합될 때 초기에는 탄성막을 형성하다가 점차 점탄성막으로 변화하지만 어느 순간에 다시 탄성막 점탄성막의 변화를 반복함을 확인하였다. 본 연구결과, 수정진동자를 이용하여 전기화학적 중합막의 유변학적 동특성을 중합과정에서 해석할 수 있음을 확인하였다.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.75-83
• /
• 2012

PURPOSES: Suggestion of asphalt binder constitutive model based on time-temperature superposition principle and overstress concept in order to describe behavior of asphalt binders. METHODS: A series of temperature sweep tests and multiple stress creep and recovery(MSCR) tests are performed to verify the applicability of time-temperature superposition principle(t-Ts) and to develop viscoelastoplastic constitutive equation based on overstress concept. For the tests, temperature sweep tests at various high temperature and various frequency and MSCR test at $58^{\circ}C$, $64^{\circ}C$ $70^{\circ}C$, $76^{\circ}C$, and $82^{\circ}C$ are performed. From the temperature sweep tests, dynamic shear modulus mastercurve and time-temperature shift function are built and the shift function and MSCR at $58^{\circ}C$ are utilized to determine model coefficients of VBO model. RESULTS: It is observed that the time-temperature shift function built at low strain level of 0.1% is applicable not only to 1.0% strain level temperature sweep test but also maximum 500,00% strain level of MSCR test. As well, the modified VBO model shows perfect prediction on MSCR measured strain at the other temperatures. CONCLUSIONS: The Time-temperature superposition principle stands hold from very low strain level to very high strain level and that the modified VBO model can be applicable for various range of strain and temperature region to predict elastic, viscoelastic, and viscoplastic strain of asphalt binders.

• 소성∙가공
• /
• 제6권3호
• /
• pp.239-249
• /
• 1997

The behaviour of alloys in the semi-solid state strongly depends on the imposed stress state and on the morphology of the phase which can vary from dendritic to globular. To optimal net shape forging of semi-solid materials, it is important to investigate for filling phenomena in forging process of arbitrarily shaped dies. To produce a automotive part which has good mechanical property, the filling pattern according to die velocity and solid fraction distribution has to be estimated for arbitrarily shaped dies. Therefore, the estimation of filling characteristic in the forging simulation with arbitrarily shaped dies of semi-solid materials are calculated by finite element method with proposed algorithm. The proposed theoretical model and a various boundary conditions for arbitrarily shaped dies is investigated with the coupling calculation between the liquid phase flow and the solid phase deformation. The simulation process with arbitrarily shaped dies is performed to the isothermal conditions of two dimensional problems. To analysis of forging process by using semi-solid materials, a new stress-strain relationship is described, and forging analysis is performed by viscoelastic model for the solid phase and the Darcy's law for the liquid flow. The calculated results for forging force and filling limitations will be compared to experimental data. The filling simulation of simple products performed with the uniform billet temperature(584$^{\circ}C$) from the induction heating by the commercial package MAGMAsoft. The initial step of computation is the touching of semi-solid material with the end of die gate and the initial concept of proposed system just fit with the capability of MAGMAsoft.

• Journal of Periodontal and Implant Science
• /
• 제23권2호
• /
• pp.331-344
• /
• 1993

The purpose of this study was to investigate the change of tooth mobility and bite force according to periodontal disease severity. Tooth mobility and biting force due to change of viscoelastic property of periodontium were influenced by inflammation of periodontal tissue. 30 patients participated in this study, the periodontal disease severity is evaluated with SBI and attachment loss. SBI and attachment loss were examined by periodontal probe. Tooth mobility was tested two times to each tooth using periotest (Siemens Co, Germany) and bite force was evaluated with MPM-3000 (Nihon Kohden Co, Japan). Statistical analysis was applied to correlation ($r^2$) and regression analysis. The obtained results were as follows : 1. As the attachment loss increased, tooth mobility increased with significance, and they had highly positive correlation ($r^2=0.68$) on entire dentition. 2. As the SBI increased, tooth mobility increased with significance, and they had positive correlation ($r^2=0.37$) on entire dentition. 3. As the attachment loss increased, bite force decreased with significance, and they had highly negative correlation ($r^2=0.42$) on maxillary anterior dentition but low negative correlation ($r^2=0.20$) on the other portion of dentition. 4. As the SBI increased, bite force decreased with significance, and they had highly negative correlation ($r^2=0.31$) on maxillary anterior dentition but low negative correlation ($r^2=0.16$) on the other portion of dentition. 5. As tooth mobility increased, bite force decreased with significance, and they had highly negative correlation ($r^2=0.32$) on maxillary anterior dentition but low negative correlation ($r^2=0.16$) on the other portion of dentition.

• Korea-Australia Rheology Journal
• /
• 제13권1호
• /
• pp.29-35
• /
• 2001

The development of filament stretching extensional rheometers over the past decade has enabled the systematic measurement of the transient extensional stress growth in dilute and semi-dilute polymer solutions. The strain-hardening in the extensional viscosity of dilute solutions overwhelms the perturbative effects of capillarity, inertia & gravity and the kinematics of the extensional deformation become increasingly homogeneous at large strains. This permits the development of a robust open-loop control algorithm for rapidly realizing a deformation with constant stretch history that is desired for extensional rheometry. For entangled fluids such as concentrated solutions and melts the situation is less well defined since the material functions are governed by the molecular weight between entanglements, and the fluids therefore show much less pronounced strain-hardening in transient elongation. We use experiments with semi-dilute/entangled and concentrated/entangled monodisperse polystyrene solutions coupled with time-dependent numerical computations using nonlinear viscoelastic constitutive equations such as the Giesekus model in order to show that an open-loop control strategy is still viable for such fluids. Multiple iterations using a successive substitution may be necessary, however, in order to obtain the true transient extensional viscosity material function. At large strains and high extension rates the extension of fluid filaments in both dilute and concentrated polymer solutions is limited by the onset of purely elastic instabilities which result in necking or peeling of the elongating column. The mode of instability is demonstrated to be a sensitive function of the magnitude of the strain-hardening in the fluid sample. In entangled solutions of linear polymers the observed transition from necking instability to peeling instability observed at high strain rates (of order of the reciprocal of the Rouse time for the fluid) is directly connected to the cross-over from a reptative mechanism of tube orientation to one of chain extension.