• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.5
• /
• pp.553-567
• /
• 2011

During the last three years, the possibility of the time reversal Lamb waves has been paid attention to for structural health monitoring of a plate. This study proposes a numerical scheme which can simulate the spatial focusing of time reversal Lamb waves on a rectangular plate. In this scheme, a time reversal process is formulated in the frequency domain using active virtual sensors being equivalent to the mirror effects of an actual sensor due to wave reflection on the plate boundary. Forward and backward Lamb wave propagations are represented by scalar functions for simulating the spatial focusing of time reversal Lamb waves. The validity of the proposed scheme is demonstrated through the comparison to the results of finite element analysis in which the spatial focusing of time reversal Lamb waves is realized by wafer-type piezoelectric(PZT) transducers collocated on a rectangular plate.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1183-1188
• /
• 2005

In this paper, we propose a 3D automated measuring system which measures the mandibular movements and the reference plane of the jaw movements. In diagnosis and treatment of the malocclusions, it is necessary to estimate the mandibular movements and the reference plane of the jaw movements. The proposed system is configured with double stereo-cameras, PC, two moving pattern plates(MPPs), two fixed pattern plates(FPPs) and one orbital marker. The virtual pattern plate is applied to calculate the homogeneous transformation matrices which describe the coordinates systems of the FPP and MPP with respect to the world coordinates system. To estimate the parameters of the hinge axis, the Euler's theorem is applied. The hinge axis points are intersections between the FPPs and the hinge axis. The coordinates of a hinge axis point with respect to the MPP coordinates system are set up to fixed value. And then, the paths of the jaw movement can be calculated by applying the homogeneous transformation matrix to fixed hinge axis point. To examine the accuracy of the measurements, experiments of measuring the hinge axis points and floating paths of them are performed using the jaw motion simulator. As results, the measurement errors of the hinge axis points are within reasonable boundary, and the floating paths are very similar to the simulator's moving path.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.1
• /
• pp.70-78
• /
• 2003

This paper dealt with an experimental study on the hydroelastic vibration of clamped perforated rectangular plates submerged in water. The penetration of holes in the plates had a triangular pattern with P/D (pitch to diameter) 1.750, 2.125, 2.500, 3.000 and 3.750. The natural frequencies of the perforated plates in air were obtained by the analytical method based on the relation between the reference kinetic and maximum potential energy and compared with the experimental results. Good agreement between the results was found for the natural frequencies of the perforated plates in air. It was empirically found that the natural frequencies of the perforated plate in air increase with an increase of P/D, on the other hand, the natural frequencies of the perforated plate in contact with water decrease with an increase of P/D. Additionally. the effect of the submerged depth on the natural frequency was investigated.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.4
• /
• pp.93-106
• /
• 2023

The study is to develop and present a leggings pattern that is suitable for the human body by using a standard body type avatar for a female in her 30s. As a research method, the average body type was selected from adult women in their 30s, and the appearance was evaluated using the CLO software program. The data analysis of this study compared the dimensions and shape of each part by legging. The leggings pattern suggested based on the above research results was determine to be a total length of 80.6cm and hip length of 24cm, and the knee length was set by dividing the legging in half from the waist to the hem and then adding 5cm. These figures were evaluated higher than Company D in terms of the adequacy of the upper part of the front and rear plates of Company A as well as the adequacy of the knee lines. Company A's figures were applied and corrected. For the front plate, the waist circumference was divided by 4, and 3.5cm was removed, and the hip circumference was set by dividing the hip circumference by 4, and 3.8cm was removed. In the appearance evaluation results Company D was highly evaluated in the suitability evaluation of the waist and hips, and the waist and hips were set using the pattern of Company D. The length of the front panel was modified by dividing the hip circumference by 4 and adding 1.8cm to the length, and the length of the back panel was modified by dividing the hip circumference by 3 and adding 8cm after dividing the hip circumference by 0.8cm.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1089-1103
• /
• 2000

A Problem of relevant interest to some industries is that of obtaining optimum two-dimensional layout. To solve this provlem, one is given a number of rectangular sheets and an order for a specified number of each of certain types of two-dimensional regular and irregular shapes. The aim is to cut the the shapes out of the sheets in such a way as to minimize the amount of waste produced. A DCS (Distributed Control System) is an integrated system which applies the decentralization concept to a control system handling both sequential and analog control. A DCS performs many operations such as data gathering, data processing, data storing and monitoring the operatin conditions for the operator. IN this paper, we propose a genetic algorithm based on rotation parameters from which the best pattern of layout is found as well as a layout method for better performance time. A DCS for the plate cutting process system, which is performed by a virtual system, is also identified.

• Journal of the Korean Society of Safety
• /
• v.18 no.1
• /
• pp.19-27
• /
• 2003

This paper presented an experimental modal analysis of clamped perforated rectangular plates submerged in water. The penetration of holes in the plates had a triangular pattern with P/D (pitch to diameter) 1.750, 2.125, 2.500, 3.000 and 3.750. The natural frequencies of the perforated plates in air were obtained by the Rayleigh-Ritz method and compared with the experimental results. Good agreement was obtained between the analytical solution and experimental result. The experimental results in water showed that the mode shapes are not sensitive to the depth of submergence. The natural frequencies were shown to decrease drastically once the perforated plates come in contact with water. However, the natural frequencies decrease with the depth of submergence until a certain depth is reached, and become the asymptotic values beyond this depth of submergence. The depth of submergence did not affect the damping ratio greatly.

• The Research Journal of the Costume Culture
• /
• v.28 no.3
• /
• pp.299-312
• /
• 2020

The purpose of this study is to create a shirt sloper suitable for an elderly male body shape by producing virtual models using a 3D-virtualization program, making a torso prototype using the Yuka CAD system, and employing 3D simulation to virtualize and calibrate the model. First, the following three types of obese dummies are implemented through the CLO 3D program: Type 1 exhibits body fat in the lower body; Type 2 exhibits an obese abdomen; and Type 3 displays a balanced form of obesity. Second, for the design of the shirt pattern, the waist back length (measured value+1), back armhole depth (C/10+12+3+0.5~1.5), front armhole depth (back armhole depth 0~1), front interscye (2C/10-1+0.5-0.5), armscye depth (C/10+2+3.5+ 0.5), back interscye (2C/10-1+1), front chest C (C/4+2.5+1), back chest C (C/4+2.5-1), front hem C (C/4+2.5+1(+2)), back hem C (C/4+2.5-1(+2)), cap height (AH/3-5), and biceps width (Front AH-1, Back AH-1) are calculated. Third, the virtual attachment of the shirt pattern is resolved by increasing the front and back armhole depths, and the front and rear wrinkles are improved by adding a back armhole dart. The front hem lift and lateral pull caused by the protrusion of the abdomen are amended by increasing the margin of the chest, waist C, and hip C, with the appearance improved by balanced margin distribution in the front, back, and side panels. The improved retail pattern with an increase in the front armholes C was balanced on the torso plate.

• Transactions of Materials Processing
• /
• v.28 no.5
• /
• pp.239-246
• /
• 2019

Various surface texturing techniques have been studied because of the effective applicability of micro or nano scale surface patterns. Particularly, the most promising types of patterns include the hierarchical patterns, which consists of micro/nano structures. Different processes such as MEMS, laser machining, micro cutting and micro grinding have been applied in the production of hierarchical patterns on various material surfaces. This study demonstrates the process of hot imprinting to induce the hierarchical patterns on the Al alloy surfaces. Wire electrical discharge machining (WEDM) process was used to imprint molds with micro scale sinusoidal pattern. In addition, the sinusoidal pattern with rough surface morphology was obtained as a result of the discharge craters. Consequently, the hierarchical patterns consisting of the sinusoidal pattern and the discharge craters were prepared on the imprinting mold surface. Hot imprinting process for the Al plates was conducted on the prepared mold, and the replication performance was analyzed. As a result, it was confirmed that the hierarchical patterns of the mold were effectively duplicated on the surface of Al plate.

• Journal of the Optical Society of Korea
• /
• v.4 no.1
• /
• pp.48-53
• /
• 2000

In Optical Scanning Holography(OSH), 3-D holographic information of an object is generated by 2-D active optical scanning. The optical scanning beam can be a time-dependent Gaussian apodized Fresnel zone plate. In this technique, the holographic information manifests itself as an electric signal which can be sent to an electron-beam-addressed spatial light modulator for coherent image reconstruction. In this paper, we briefly review optical scanning holography and analyze the resolution achievable with the system. We also present mathmatical expressions of real and virtual images which are responsible for holographic image reconstruction. We then show the twin-image noise effect on the reconstruction in conjunction with the size of the Fresnel zone pattern through computer simulation.