• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.45-54
• /
• 2002

This paper proposes a video compression algorithm using characteristics of wavelet coefficients. The proposed algorithm can provide lowed bit rate and faster running time while guaranteeing the reconstructed image qualify by the human virtual system. In this approach, each video sequence is decomposed into a pyramid structure of subimages with various resolution to use multiresolution capability of discrete wavelet transform. Then similarities between two neighboring frames are obtained from a low-frequency subband which Includes an important information of an image and motion informations are extracted from the similarity criteria. Four legion selection filters are designed according to the similarity criteria and compression processes are carried out by encoding the coefficients In preservation legions and replacement regions of high-frequency subbands. Region selection filters classify the high-frequency subbands Into preservation regions and replacement regions based on the similarity criteria and the coefficients In replacement regions are replaced by that of a reference frame or reduced to zero according to block-based similarities between a reference frame and successive frames. Encoding is carried out by quantizing and arithmetic encoding the wavelet coefficients in preservation regions and replacement regions separately. A reference frame is updated at the bottom point If the curve of similarity rates looks like concave pattern. Simulation results show that the proposed algorithm provides high compression ratio with proper Image quality. It also outperforms the previous Milton's algorithm in an Image quality, compression ratio and running time, leading to compression ratio less than 0.2bpp. PSNR of 32 dB and running tome of 10ms for a standard video image of size 352${\times}$240 pixels.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.177-182
• /
• 2010

The flow of a universal system-level design methodology consists of system specification, system-level hardware/software partitioning, co-design, co-verification using virtual or physical prototype, and system integration. In the developing process of a hardware component in system, the design phase has been regarded as a phase consuming lots of time and cost. However, the verification phase in which functionality of the designed component is verified has recently been considered as a much important phase. In this paper, the implementation of a verification environment which is based on SystemC infrastructure and verifies the functionality of a hardware component is described. The proposed verification system uses SystemC user-defined channel as communication interface between variables of SystemC module and registers of Verilog module. The functional verification of an UART is performed on the proposed verification system. SystemC provides class library for hardware modeling and has an advantage of being able to design a system consisting hardware and software in higher abstraction level than register transfer level. Source codes of SystemC modules are reusable with a minor adaptation on verifying functionality of another hardware component.

• Korean Journal of Optics and Photonics
• /
• v.28 no.4
• /
• pp.158-165
• /
• 2017

The physical shape of an ultrasound transducer has not been considered in previous studies of the photoacoustic saturation effect, where a photoacoustic signal's magnitude linearly increases as an absorption coefficient increases and it is finally saturated. In this paper, the effect of a spherically focused ultrasound transducer on photoacoustic nonlinearity is investigated. The focused ultrasound transducer's spatial filtering effect on photoacoustic signals is analytically derived considering the combined concept of a virtual point detector and Green function approach. The ultrasound transducer's temporal response (i.e., transfer function) effect on photoacoustic signals is considered by integrating photoacoustic signal values within the absorption area covered by a spatial resolution of the ultrasound transducer. Results from the analytically derived expression show that the magnitude of photoacoustic signals measured by a spherical focused ultrasound transducer shows a maximum at a specific absorption coefficient, and decreases after that maximum point as an absorption coefficient is increased. The origin of this photoacoustic nonlinearity is physically understood by comparing the ultrasound transducer's transfer functions and photoacoustic resonance spectra. In addition, this physical interpretation implies that the photoacoustic nonlinearity is strongly dependent on the irradiance distribution inside an absorption medium.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.278-281
• /
• 2018

The early Web technology was to show text information through a browser. However, as web technology advances, it is possible to show large amounts of multimedia data through browsers. Web technologies are being applied in a variety of fields such as sensor network, hardware control, and data collection and analysis for big data and AI services. As a result, the standard has been prepared for the Internet of Things, which typically controls a sensor via HTTP communication and provides information to users, by installing a web browser on the interface of the Internet of Things. In addition, the recent development of web-assembly enabled 3D objects, virtual/enhancing real-world content that could not be run in web browsers through a native language of C-class. Factors that evaluate the performance of existing Web applications include performance, network resources, and security. However, since there are many areas in which web applications are applied, it is time to revisit and review these factors. In this thesis, we will conduct an analysis of the factors that assess the performance of a web application. We intend to establish an indicator of the development of web-based applications by reviewing the analysis of each element, its main points, and its needs to be supplemented.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.421-431
• /
• 2011

In this paper, actual bridges constructed with SMA (Stone Mastic Asphalt) deck pavement and virtual bridges substituted the deck pavement with polymer concrete under the same conditions were statically analyzed to investigate applicability of the thin polymer concrete bridge deck pavements. PSC (prestressed Concrete) girder bridge, steel box girder bridge, PSC box girder bridge, and RC (Reinforced Concrete) rahmen bridge constructed with the SMA deck pavement were analyzed and compared to evaluate various types of the bridge. The bridge deck and pavement were assumed to be fully bonded and the stress and deformation during the construction were ignored while those due to pavement weight and vehicle loading were analyzed. According to the analysis results, the stress and deformation of the bridges using the polymer concrete due to the pavement weight were smaller than those using the SMA because of smaller self weight due to lighter unit weight and thinner thickness of the pavement. The stress and deformation of the bridges using the polymer concrete due to the vehicle loading were larger than those using the SMA because of the smaller area moment of inertia due to the thinner pavement thickness. In case that the pavement weight and vehicle loading applied simultaneously, the stress and deformation of the bridges using the polymer concrete were smaller because effect of self weight reduction was more dominant. Investigation of performance of the bridge deck pavement and analysis of economical efficiency are warranted.

• Journal of the Korea Society for Simulation
• /
• v.22 no.1
• /
• pp.9-20
• /
• 2013

Defense M&S for weapons effectiveness is a realistic way to support virtual warfare similar to real warfare. As the war paradigm becomes platform-centric to network-centric, people try to utilize smartphones as the source of sensor, and command/control data in the simulation-based weapons effectiveness analysis. However, there have been limited researches on integrating smartphones into the weapon simulators, partly due to high modeling cost - modeling cost to accomodate client-server architecture, and re-engineering cost to adapt the simulator on various devices and platforms -, lack of efficient mechanisms to exchange large amount of simulation data, and low-level of security. In this paper, we design and implement Smartphone Adaptor to utilize smartphones for the simulationbased weapons effectiveness analysis. Smartphone Adaptor automatically sends sensor information, GPS and motion data of a client's smartphone to a simulator and receives simulation results from the simulator on the server. Also, we make it possible for data to be transferred safely and quickly through JSON and SEED. Smartphone Adaptor is applied to OpenSIM (Open simulation engine for Interoperable Models) which is an integrated simulation environment for weapons effectiveness analysis, under development of our research team. In this paper, we will show Smartphone Adaptor can be used effectively in constructing a Live simulation, with an example of a chemical simulator.

• Journal of Radiation Protection and Research
• /
• v.30 no.1
• /
• pp.17-25
• /
• 2005

Since the safety of nuclear power plant has been becoming a big social issue the exposure dose of radiation for workers has been one of the important factors concerning the safety problem. The existing calculation methods of radiation dose used in the planning of radiation work assume that dose rate does not depend on the location within a work space thus the variation of exposure dose by different work path is not considered. In this study, a modified numerical method was presented to estimate the exposure dose during radiation work in radwaste storage considering the effects of the distance between a worker and sources. And a new numerical algorithm was suggested to search the optimal work path minimizing the exposure dose in pre-defined work space with given radiation sources. Finally, a virtual work simulation program was developed to visualize the exposure dose of radiation doting radiation works in radwaste storage and provide the capability of simulation for work planning. As a numerical example, a test radiation work was simulated under given space and two radiation sources, and the suggested optimal work path was compared with three predefined work paths. The optimal work path obtained in the study could reduce the exposure dose for the given test work. Based on the results, tile developed numerical method and simulation program could be useful tools in the planning of radiation work.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.293-297
• /
• 2016

For mastectomy patients, sufficient doses of radiation should be delivered to the surface of the chest wall to prevent recurrence. A bolus is used to increase the surface dose on the chest wall, whereby the surface dose is confirmed with the use of a virtual bolus during the computerized treatment-planning process. The purpose of this study is an examination of the difference between the dose of the computerized treatment plan and the dose that is measured on the bolus. Part of the left breast of an Anderson Rando phantom was removed, followed by the attainment of computed tomography (CT) images that were used as the basis for computerized treatment plans that were established with no bolus, a 3 mm-thick bolus, a 5 mm-thick bolus, and a 10 mm-thick bolus. For the computerized treatment plan, a prescribed dose regimen was dispensed daily and planning target volume (PTV) coverage was applied according to the RTOG 1304 guidelines. Using each of the established computerized treatment plans, chest-wall doses of 5 points were measured; this chest-wall dose was used as the standard for the analysis of this study, while the level of significance was set at P < 0.05. The measurement of the chest-wall dose with no bolus is 1.6 % to 10.3 % higher, and the differences of the minimum average and the maximum average of the five measurement points are -13.8 and -1.9, respectively (P < 0.05); however, when the bolus was used, the dosage was measured as 3.7 % to 9.2 % lower, and the differences of the minimum average and the maximum average are 7.4 and 9.0, -1.2 and 17.4, and 8.1 and 19.8 for 3 mm, 5 mm, and 10 mm, respectively (P < 0.05). As the thickness of the bolus is increased, the differences of the average surface dose are further increased. There are a variety of factors that affect the surface dose on the chest wall during post-mastectomy radiation therapy, for which verification is required; in particular, a consideration of the appropriate thickness and the number of uses when a bolus is used, and which has the greatest effect on the surface dose on the chest wall, is considered necessary.

• Nuclear Engineering and Technology
• /
• v.20 no.2
• /
• pp.88-104
• /
• 1988

The FUel Rod Analysis(FURA) code is developed using two-dimensional finite element methods for axisymmetric and plane stress analysis of fuel rod. It predicts the thermal and mechanical behavior of fuel rod during normal and load follow operations. To evaluate the exact temperature distribution and the inner gas pressure, the radial deformation of pellet and clad, the fission gas release are considered over the full-length of fuel rod. The thermal element equation is derived using Galerkin's techniques. The displacement element equation is derived using the principle of virtual works. The mechanical analysis can accommodate various components of strain: elastic, plastic, creep and thermal strain as well as strain due to swelling, relocation and densification. The 4-node quadratic isoparametric elements are adopted, and the geometric model is confined to a half-pellet-height region with the assumption that pellet-pellet interaction is symmetrical. The pellet cracking and crack healing, pellet-cladding interaction are modelled. The Newton-Raphson iteration with an implicit algorithm is applied to perform the analysis of non-linear material behavior accurately and stably. The pellet and cladding model has been compared with both analytical solutions and experimental results. The observed and predicted results are in good agreement. The general behavior of fuel rod is calculated by axisymmetric system and the cladding behavior against radial crack is used by plane stress system. The sensitivity of strain aging of PWR fuel cladding tube due to load following is evaluated in terms of linear power, load cycle frequency and amplitude.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.123-134
• /
• 2002

The requirement for QoS (Quality of Service) has become an important Issue as real-time or high bandwidth services are increasing, such as Internet Telephony, Internet broadcasting, and multimedia service etc. In order to guarantee the QoS of Internet application services, several approaches are being sought including IntServ (Integrated Service) DiffServ(Differentiated Srvices), and MPLS(Multi-Protocol Label Switching). In this paper, we describe the performance analysis of QoS guarantee mechanism using the DiffServ. To analyze how the DiffServ performance was affected by diverse input traffic models and the weight value in WFQ(Weighted Fair Queueing), we simulated and performed performance evaluation under a random, bursty, and self-similar input traffic models and for diverse input parameters. leased on the results of performance analysis, it was confirmed that significant difference exist in packet delay and loss depending on the input traffic models used. However, it was revealed that QoS guarantee is possible to the EF (expedited Forwarding) class and the service separation between RF and BE (Best Effort) classes may also be achieved. Next, we discussed the performance synthesis problem. (i. e. derived the conservation laws for a DiffServ networks, and analysed the performance variation and dynamic behavior based on the resource allocation (i.e., weight value) in WFQ.