• 한국측량학회지
• /
• 제28권6호
• /
• pp.605-612
• /
• 2010

광범위한 지역을 관측하기 위한 많은 종류의 위성들이 발사되어 지구를 관측하고 있다. 이러한 위성들은 영상정보 이외에 천체력 자료, RPC 계수 등과 같은 위성궤도와 관련 정보들을 제공하고 있다. 위성에서 제공하는 이러한 궤도정보를 활용할 경우 영상의 가하보정에 요구되는 기준점을 줄일 수 있다. 본 연구에서는 RADARSAT-l SAR 위성영상을 대상으로 동일궤도에서 촬영된 다중 위성영상들의 효과적인 기하보정을 위하여 기준영상에서 단일기준점 및 천제력자료를 활용하여 위성궤도를 모델링하고, 이를 기반으로 동일궤도상에서 취득된 인접영상의 기하보정기법을 기술하였다. 정확도 평가를 위해서 본 연구에서 제시한 기법으로 생성된 기하보정영상을 Erdas Imagine에서 처리한 기하보정영상과 비교하여 정확도를 평가하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1104-1106
• /
• 1996

In this paper, a hierarchical fuzzy controller is proposed for the stabilization control of the inverted pendulum system. The design of controller for that system is difficult because of its complicated nonlinear mathematical model with unknown parameters. Conventional fuzzy control strategy based only on dynamics of pendulum made have failed to stabilize. However, proposed control strategies are to swing pendulum from natural stable up equilibrium point to an unstable equilibrium point and are to transport a cart from an arbitrary position toward a center of rail. Thus, the proposed fuzzy stabilization controller have a hierarchical fuzzy inference structure; that is, the lower level is for inference interface for the virtual equilibrium point and the higher level one for the position control of cart according to the firstly inferred virtual equilibrium point.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.393-403
• /
• 1997

In this paper, we proposed an optimal identification method of identifying the membership func¬tions and the fuzzy rules for the stabilization controller of the nonlinear system by RVEGA( Real Variable Elitist Genetic Algo rithm l. Although fuzzy logic controllers have been successfully applied to industrial plants, most of them have been relied heavily on expert's empirical knowl¬edge. So it is very difficult to determine the linguistic state space partitions and parameters of the membership functions and to extract the control rules. Most of conventional approaches have the drastic defects of trapping to a local minima. However, the proposed RVEGA which is similiar to the processes of natural evolution can optimize simulta¬neously the fuzzy rules and the parameters of membership functions. The validity of the RVEGA - based fuzzy controller was proved through applications to the stabi¬lization problems of an inverted pendulum system with highly nonlinear dynamics. The proposed RVEGA - based fuzzy controller has a swing -. up control mode(swing - up controller) and a stabi¬lization one(stabilization controller), moves a pendulum in an initial stable equilibrium point and a cart in an arbitrary position, to an unstable equilibrium point and a center of the rail. The stabi¬lization controller is composed of a hierarchical fuzzy inference structure; that is, the lower level inference for the virtual equilibrium point and the higher level one for position control of the cart according to the firstly inferred virtual equilibrium point. The experimental apparatus was imple¬mented by a DT -- 2801 board with AID, D/A converters and a PC - 586 microprocessor.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1575-1581
• /
• 2019

Due to the mismatched line impedance among distributed generation units (DGs) and uncontrolled harmonic current, the droop controller has a number of problems such as inaccurate reactive power sharing and voltage distortion at the point of common coupling (PCC). To solve these problems, this paper proposes a resistive-capacitive virtual impedance control method. The proposed control method modifies the DG output impedance at the fundamental and harmonic frequencies to compensate the mismatched line impedance among DGs and to regulate the harmonic current. Finally, reactive power sharing is accurately achieved, and the PCC voltage distortion is compensated. In addition, adaptively controlling the virtual impedance guarantees compensation performance in spite of load changes. The effectiveness of the proposed control method was verified by experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1621-1624
• /
• 2003

This paper presents a new method that generates a path that has no collision with the obstacles or the characters by using the three motion parameters, and automatically creates natural motions of characters that are confined to the path. Our method consists of three parameters: the joint information parameter, the behavior information parameter, and the environment information parameter. The joint information parameters are extracted from the joint angle data of the character and this information is used when creating a path following motion by finding the relation-function of the parameters on each joint. A user can set the behavior information parameter such as velocity, status, and preference and this information is used for creating different paths, motions, and collision avoidance patterns. A user can create the virtual environment such as road and obstacle, also. The environment is stored as environment information parameters to be used later in generating a path without collision. The path is generated using Hermit-curve and each control point is set at important places.

• 전력전자학회논문지
• /
• 제20권1호
• /
• pp.81-90
• /
• 2015

This paper investigates the droop control-based real and reactive power load sharing with a virtual inductor when the line impedance between inverter and Point of Common Coupling (PCC) is partly and unequally resistive in high-capacity systems. In this paper, the virtual inductor method is applied to parallel inverter systems with resistive and inductive line impedance. Reactive power sharing error has been improved by applying droop control after considering each line impedance voltage drop. However, in high capacity parallel systems with large output current, the reference output voltage, which is the output of droop controller, becomes lower than the rated value because of the high voltage drop from virtual inductance. Hence, line impedance voltage drop has been added to the droop equation so that parallel inverters operate within the range of rated output voltage. Additionally, the virtual inductor value has been selected via small signal modeling to analyze stability in transient conditions. Finally, the proposed droop method has been verified by MATLAB and PSIM simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1714-1717
• /
• 1997

A human operator is able to perform some tasks smoothly with force feedvack for the teleoperation or a virtual device in a the virtual environments. This paper describes a virtual force generation method with which operator can feel the interactive force between virtula robot and artificial environments. A virtual force generation algortihm is applied to generate the contact force at the arbitrary point of virtual robot, and the virtual force is displayed to the human operator via a tendon master arm consisted with 3 motors. Some experiments has beencarried out to verify the effectiveness of the force generation algorithm and usefulness of the developed backdrivable master arm.

• 대한임베디드공학회논문지
• /
• 제4권4호
• /
• pp.180-189
• /
• 2009

Currently, most automobile companies are interested in research on intelligent autonomous vehicle. They are mainly focused on driver's intelligent assistant and driver replacement. In order to develop an autonomous vehicle, lateral and longitudinal control is necessary. This paper presents a lateral and longitudinal control system for autonomous vehicle that has only mono-vision camera. For lane detection, we present a new lane detection algorithm using clothoid parabolic road model. The proposed algorithm in compared with three other methods such as virtual line method, gradient method and hough transform method, in terms of lane detection ratio. For adaptive control, we apply a vanishing point estimation to fuzzy control. In order to improve handling and stability of the vehicle, the modeling errors between steering angle and predicted vanishing point are controlled to be minimized. So, we established a fuzzy rule of membership functions of inputs (vanishing point and differential vanishing point) and output (steering angle). For simulation, we developed 1/8 size robot (equipped with mono-vision system) of the actual vehicle and tested it in the athletics track of 400 meter. Through the test, we prove that our proposed method outperforms 98 % in terms of detection rate in normal condition. Compared with virtual line method, gradient method and hough transform method, our method also has good performance in the case of clear, fog and rain weather.

• 한국산학기술학회논문지
• /
• 제21권8호
• /
• pp.537-545
• /
• 2020

본 연구는 회복기 단계에 있는 뇌혈관 질환자를 대상으로 가상현실 콘텐츠를 활용한 인지재활프로그램의 임상적 적용 효과를 알아보았다. 연구방법은 회복기 단계의 뇌혈관 질환자 34명을 대상으로 대조군(16명)과 실험군(18명)으로 나눈 후에 가상현실 콘텐츠 기반의 인지재활프로그램을 적용한 후, 인지기능과 일상생활활동 능력, 상지기능에서의 효과를 비교하고자 하였다. 대조군에는 보편적인 재활치료 프로그램을 실시하고, 실험군에서는 보편적인 재활치료 프로그램과 가상현실 콘텐츠 기반의 인지재활프로그램을 제공하였다. 두 집단 모두 하루 2회(1회 30분씩)씩, 주 5회, 4주간(총 20회기) 실시하였다. 중재 결과, 두 집단 모두 일상생활활동 능력이 모두 유의미하게 향상되었지만(p<.05), 실험군에서의 변화량이 대조군보다 5점정도 더 향상되었다(p<.05). 인지기능에서도 실험군과 대조군이 유의미한 차이를 보였고(p<.05), 변화량에서 실험군이 대조군보다 2점정도의 변화 수치를 보였다(p<.05). 상지기능에서는 대조군과 실험군 간의 유의마한 차이는 없었고(p>.05), 전후 변화량을 비교한 결과 실험군이 대조군보다 0.7점정도 유의미한 변화폭을 보였다(p<.05). 가상현실 콘텐츠를 활용한 인지재활프로그램이 일반적인 재활치료 프로그램에 비해서 일상생활활동 능력과 인지기능에서의 유의미한 향상 폭의 차이가 있다는 것을 확인하는 연구였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.665-665
• /
• 2005

The existing DSP for utility interactive photovoltaic generation system control generally uses floating point process type. Because it is easy to use for number crunching, however, it is too late and too expensive. Fixed point process DSP TMS320F2812, has high control speed and is rather inexpensive. A very complicated real system can be simulated using hardware-in-the-loop (HIL) system in a virtual environment Therefore, HIL system can speed up research and development process with a little effort. Also current DSP for utility interactive photovoltaic generation system adopts floating point process type, which is easy to use for number crunching. However, fixed point process DSF, TMS320F2812, has high control speed and is rather inexpensive. This paper presents more efficient method for MPPT control using TMS320F2812 along with HIL System.