• 한국실내디자인학회논문집
• /
• 제27권1호
• /
• pp.48-57
• /
• 2018

Recently, cosmetic shops are facing a complicate economy situation and a great number of brands are attempting two-way communication with customers, not one-way communication. 'Brand' equity is important to deliver virtual brand mark as visual image. We have 4 steps for brand identity structure, and this study is about the first 'brand-awareness' and the second step 'brand-image'. We investigated the correlation between brand-awareness and brand-image after searching which spatial elements are highly effective to both steps as we designated 5 cosmetic shops. We already organized the means of spatial analysis and we separated into two elements, constructive and decorative. For constructive element, a shop needs a distinct ceiling and wall design, and for decorative element, strong brand image communication is required through showcase design. We proved that brand awareness and brand image have the correlation, which also can be in direct proportion, by regression analysis. The result of this study shows that improving brand awareness as the primary element for cosmetic road shop can be an effective way to enhance brand image.

• 한국측량학회지
• /
• 제26권6호
• /
• pp.591-598
• /
• 2008

최근 정부에서는 도로의 기하구조 불량으로 인해 사고 발생률이 높은 대상지에 대해 위험도로개선사업을 추진 중에 있다. 비록, 도로의 노선을 선택하는 것이 기본적이고 중요한 과정이지만 노선 선정의 과정은 기술적, 안전적, 환경적인 요소들을 모두 고려해야 한다. 또한, 3차원 지형모델 기술은 대체 노선선정에 대한 설계와 계획에서 중요한 요소로 사용될 수 있다. 수치지도와 노선도의 조합에 의해 생성된 3차원 지형도를 조합한 실험의 경우, 주요 간선 도로 건설현장에서 다차원적인 접근 방법을 제공하기 위해 개발되었다. 3차원 수치표고 모형은 개발계획과 시공계획에 대해 설계 시공 현장에서 실시간 가상 접근을 제공하는 GIS기반으로 다양한 지표 분석을 가능하게 한다. 따라서 본 연구에서는 수치지도에 GPS측량과 토털스테이션(Total Station)측량을 이용하여 취득한 현황 측량 정보를 결합하여 노선 선정에 따른 3차원 공간 정보를 비교 검토하고 토공량 산정시 보다 정확한 양을 산정하여 도로선형개선에 활용할 수 있도록 하고, 주관적인 평가를 통하여 대체 노선에서 노선선정에 대한 합리적인 방법을 제시하고자 한다.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.107-119
• /
• 2017

PURPOSES : The desire of drivers to increase their driving speeds is increasing in response to the technological advancements in vehicles and roads. Therefore, studies are being conducted to increase the maximum design speed in Korea to 140 km/h. The stopping sight distance (SSD) is an important criterion for acquiring sustained road safety in road design. Moreover, although the perception-reaction time (PRT) is a critical variable in the calculation of the SSD, there are not many current studies on PRT. Prior to increasing the design speed, it is necessary to confirm whether the domestic PRT standard (2.5 s) is applicable to high-speed driving. Thus, in this study, we have investigated the influence of high-speed driving on PRT. METHODS : A driving simulator was used to record the PRT of drivers. A virtual driving map was composed using UC-Win/Road software. Experiments were carried out at speeds of 100, 120, and 140 km/h while assuming the following three driving scenarios according to driver expectation: Expected, Unexpected, and Surprised. Lastly, we analyzed the gaze position of the driver as they drove in the simulated environment using Smarteye. RESULTS : Driving simulator experimental results showed that the PRT of drivers decreased as driving speed increased from 100 km/h to 140 km/h. Furthermore, the gaze position analysis results demonstrated that the decrease in PRT of drivers as the driving speed increased was directly related to their level of concentration. CONCLUSIONS : In the experimental results, 85% of drivers responded within 2.0 s at a driving speed of 140 km/h. Thus, the results obtained here verify that the current domestic standard of 2.5 s can be applied in the highways designated to have 140 km/h maximum speed.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.23-28
• /
• 2021

Augmented reality is a technique for combining virtual images into real life by showing information of virtual 3D objects on top of a real-world environment (Azuma et al., 2001). This study is an augmented reality-based educational content delivery device that receives user input that selects either a preset object or a photographed object for augmented reality-based training; It includes a three-dimensional design generation unit that generates a stereoscopic model of the augmented reality environment from an object, a three-dimensional view of the scene, a disassembly process of the developing road from a three-dimensional model, and a content control unit provided by the user terminal by generating educational content including a three-dimensional model, a scene chart, a scene, a decomposition process, and a coupling process to build a coupling process from the scene to the three-dimensional model in an augmented reality environment. The next study provides a variety of educational content so that children can use AR technology as well as shapes to improve learning effectiveness. We also believe that studies are needed to quantitatively measure the efficacy of which educational content is more effective when utilizing AR technology.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.163-171
• /
• 2017

PURPOSES : Traffic safety facilities are used to prevent traffic accidents before they occur by providing drivers with information on traffic situations and the geometric design of roads. However, some facilities not defined in guidelines do not meet installation criteria, yet are being installed and used in order to increase efficiency in traffic flow and prevent traffic accidents in a specific expressway zone. In this study, we have evaluated the effect of delineation system which are not defined in the guideline criteria. METHODS : Different virtual scenarios were created for roads using expressway median barrier chevron signs, with a driving simulator used to evaluate the installation and operational effect of such signs. Ten experiments were performed with left- and right-curved roads at curve radius intervals of 500 m, from 500 m to 2,500 m. RESULTS : For sections with a curve radius of more than 1,500 m, drivers had a clear tendency toward stable driving regardless of delineation system. When a chevron sign is installed on a protection fence in the road curving left, an expanded installation is recommended up to the section with a curve radius of 1,000 m. According to the analysis results for the RHB (Relative High Beta spectrum), driving concentration also improved up to a curve radius of 1,000 m. CONCLUSIONS :The experiment result indicates the extent of biasing within a lane and the manipulation amount of steering handle, were analyzed and found to be affected by curve radius and road alignment regardless of delineation system.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.201-211
• /
• 2002

In this research, we are trying to research about hydraulic system design and vehicle dynamic modeling far the development of the tire roller. The reason why we would like develop it is that tire roller is one of the most useful machine for the road construction site and application other construction equipments. Here, we conceptualize the new hydraulic system and derive the equations of motion fur dynamic analysis and also investigate system modeling by using a DAQ board. We design the hydraulic circuit of steering and traction mechanism system. This design can be used to create virtual prototypes of construction equipment. So, we studied tire roller to integrate development technology. In system analysis, we formulate hydraulic traction system model and hydraulic steering system model. Also, we integrate DAQ system to acquire experimental results in real tire roller equipment.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.179-185
• /
• 2008

The purpose of this paper is to propose a systematic method on the weld pitch design of a vehicle sub-frame considering the fatigue life of spot welding points. The input data, which perform the fatigue analysis on the spot welding nuggets, are obtained by both the dynamic analysis of the multi-body vehicle model passing through the virtual proving ground of a typical Belgian road and the quasi-static analysis with the finite element model of the vehicle sub-frame. By utilizing the life cycle data obtained from the fatigue analysis, the welding points to perform the pitch change are determined. The sensitivity analysis on the fatigue life of the welding points is carried out by using the three-level orthogonal array design, and through the results of the sensitivity analysis, the best combination on the welding pitch is determined. This study shows that as compared with the baseline design, the sub-frame redesigned by the proposed technique improves the fatigue life about 7 percent while reducing the number of welding points about 19 percent.

• 한국ITS학회 논문지
• /
• 제21권6호
• /
• pp.97-114
• /
• 2022

지하도로의 유입연결로 합류부는 지상도로와 달리 터널로 인하여 시계확보에 제약을 받는다. 본 연구에서는 시계확보에 관련 설계요소가 합류부 주행에 미치는 영향을 분석하기 위하여 주행 시뮬레이터를 활용한 가상주행실험을 수행하였다. 가상주행환경 구축시 시계확보 설계요소를 시나리오에 반영하기 위하여 갈매기차로 길이와 본선차량 접근속도를 시나리오로 구분하여 운전자 주행행태를 분석하였다. 시나리오간 속도 측면의 분석지표와 차로변경지점, 운전자 주시 비율 분석결과는 일관성 있는 방향으로 도출되었고, 통계적 유의성을 검토하였다. 그 결과, 본선 접근속도가 더 높은 시나리오에서 갈매기차로 길이에 의한 특정 시나리오 사이에 운전자 주행행태의 차이가 있는 것으로 나타났다. 이러한 결과를 바탕으로 지하도로 유입연결로 합류부의 주행안전성 향상을 위한 설계방향과 시사점을 제시하였다.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.169-179
• /
• 2014

PURPOSES : This study is to conduct the research on the design principle for the driver's safety and comfort in installing consecutive curves of superhighway. METHODS : Superhighway does not currently exist in domestic area. Thus, this study is conducted by collecting driving behavior usage of 30 people who are involved in the members of the virtual driving simulation. By identifying the distribution characteristics of each scenario in ANOVA & Tukey Test, the distribution are categorized into three groups. RESULTS : In the case of Group A in Section 3 (R2 entry part), lane departure exceeds the safety standard, which means to be risky condition. And then in the case of Group B and C, the lane departure values applying theoretical formula was evenly distributed compared to the proven values. CONCLUSIONS : Based on the result, the continuous curve design principles at superhighway should follow three standards as follow. First, an additional linear part needs to be inserted between two curves. Second, what if inserting the linear part is difficult, it would be better to insert a curve more than 2,000m. Third, R1/R2 ratio should not be over two. This design primarily aims to the safety of the operator. Such road alignment also meets the expectations of drivers, thus, it may help drivers to be compatible and amenable while driving continuous curve in superhighway.

• 대한기계학회논문집B
• /
• 제27권4호
• /
• pp.432-439
• /
• 2003

In this research, we are trying to develop the new hydraulic driven tire roller which is conventionally operated by mechanical transmission system. The reason why we would like to develop it is that tire roller is one of the most useful machine for the road construction site and also imported totally from overseas. In this paper, we conceptualize the new hydraulic system and derive the equations of motion for dynamic analysis. And we investigate system modeling by using DAQ system. Finally, we will design the controller, which can manage the hydraulic circuit of steering and traction mechanism system. The advent of modern high-speed computers coupled with the application of high-fidelity simulation technology can be used to create “virtual prototypes of construction equipment. Tests conducted on these virtual prototypes may be used to augment actual machine testing, thereby lowering costs and shortening time to production. So, we studied tire roller to integrate development technology. In System Analysis, We formulate hydraulic driving system model and hydraulic steering system model. Also, We integrate DAQ system to acquire experimental result in real tire roller equipment.