• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.115-116
• /
• 2008

The ferroelectric vinylidene fluoride-trifluoroethylene ($VF_2$-TrFE) and $Al_2O_3$ passivation layer for the Metal/Insulator/Ferroelectric/Semiconductor (MIFS) structure were deposited using spin coating and remote plasma atomic layer deposition (RPALD), respectively. A 2.5 ~ 3 wt % diluted solution of purified vinylidene fluoride-trifluoroethylene ($VF_2$: TrFE=70:30) in a DMF solution were prepared and deposited on silicon wafer at a optimized spin speed. After annealing in a vacuum ambient at 150 ~ $200^{\circ}C$ for 60 min, upper insulator layer were deposited at temperature ranging from 100 ~ $150^{\circ}C$ by RPALD. We described electrical and structural properties of MIFS fabricated by spin coating and RPALD methods.

• Bulletin of the Korean Chemical Society
• /
• 제32권7호
• /
• pp.2345-2350
• /
• 2011

Variable temperature high-resolution $^{19}F$ magic angle spinning (MAS) solid-state NMR spectroscopy was used to characterize fluorocarbon (FKM) rubbers. The high-resolution spectra of copolymers made from two monomers, vinylidene fluoride and hexafluoropropene, and terpolymers composed of vinylidene fluoride, hexafluoropropene, and tetrafluoroethylene, were obtained using MAS speeds of up to 18 kHz combined with high temperatures of up to 200 $^{\circ}C$ at a magnetic field strength of 9.4 Tesla. From these high resolution solid-state NMR spectra, we were able to assign the spectral peaks and differentiate the copolymer FKM from the terpolymer FKM. We also determined quantitatively the monomer compositions of each FKM rubber.

• 전기화학회지
• /
• 제13권3호
• /
• pp.169-174
• /
• 2010

Sulfur cathodes were prepared by ball milling method with different types of electronic conductors and binders in different ball milling time. The sulfur cell with a cathode prepared in 45 min ball milling time gave an initial discharge capacity of 794mAh/g with Super-P as an electronic conductor and poly(vinylidene fluoride) as a binder. The cathode with multi-walled carbon nanotube as an electronic conductor showed an initial discharge capacity of 944 mAh/g and a discharge capacity of 300 mAh/g after 20 cycles. Cathodes with poly(ethylene oxide) and poly(vinylidene fluoride) as binders showed different cycle performance.

• 폴리머
• /
• 제28권6호
• /
• pp.509-518
• /
• 2004

비대칭 블록 공중합체와 단일고분자로 구성된 블렌드의 미세 도메인 구조와 결정화 거동을 소각 X-선 산란, 광학 현미경 및 DSC를 사용하여 조사하였다. 본 연구에서는 폴리(메틸 메타크릴레이트) 블록의 무게 분률이 0.53인 폴리(메틸 메타크릴레이트)-폴리스티렌 이종 블록 공중합체 (PMMA-b-PS)를 저분자량 폴리(비닐리덴 플루오라이드) (PVDF)와 혼합하였다. PVDF 함량 증가에 따라 블렌드 미세구조가 라멜라에서 실린더 구조로 전이하였으며, PVDF의 결정화는 결정화 이전에 형성된 미세구조의 배열을 교란시켜 질서도가 낮은 형태를 야기시켰다. 또한, PVDF 결정화 거동은 PMMA 블록과의 혼화성 및 미세 도메인에 의해 부가되는 공간적 제한에 큰 영향을 받았다.

• 한국수소및신에너지학회논문집
• /
• 제16권4호
• /
• pp.334-342
• /
• 2005

200-300 nm 직경을 지닌 폴리비닐리덴 플루오라이드 초극세 섬유를 전기방사법으로 제조하였다. 이들을 불응화시킨 후, $800-1800^{\circ}C$ 온도에서 탄화시켜 PVdF 계 탄소나노 섬유를 제조하여 구조 및 기공분석을 하였다. 이들은 20-30 nm 크기의 탄소입자로 이루어져 있으며 탄소나노입자는 1 nm이하의 슬릿형 나노기공을 지니고 있었다. 탄화온도가 증가함에 따라 비표면적은 $1500^{\circ}C$에서 $414\;m^2/g$로 감소하였으나, $1800^{\circ}C$에서는 $1300\;m^2/g$로 급격히 다시 증가하였으며 1 nm 이하의 나노기공만을 지닌 탄소섬유가 얻어졌다. 비표면적 및 기공특성과 수소저장특성을 관계를 조사하기 위하여 Magnetic Syspension Balance(MSB)를 사용한 중량법으로 평가한 이들의 수소저장능은 0.04-0.4wt%이었다.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.72-79
• /
• 2018

Hybrid F2HX surfactants bearing a sulfate moiety and both hydrocarbon and fluorocarbon chains were prepared by the reaction of alkyl glycidyl ethers with fluoro-alcohol, and subsequent sulfation. The fluorocarbon number in F2HX was fixed at the shortest number possible (i.e., 2), while the hydrocarbon number (X) in the second chain was varied between 2, 4, 6, and 8. Their surface-active properties and emulsion stabilities were systematically estimated as a function of the X. Among them, F2H8 exhibited the optimal surfactant performance, which was comparable to previously reported surfactants and it was successfully applied in the emulsion polymerization of vinylidene fluoride.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.420-422
• /
• 1995

PVDF (polyvinylidene fluoride) has at least from known crystalline structure ( ; they are referred to as the $\alpha$, $\beta$, $\gamma$ and $\alpha_p$ phase or forms II, I, III and $IV_p$). In this study, the manufactured PVDF thin films through vapor deposition method had for II ( ; the substrate temperature at 30$^{\circ}C$). The dielectric behavior of poly(vinylidene fluoride) is affected by orientation and crystal modification. The very high value of the dielectric constant for high temperature conditioned film is believed to be due to the orientation effect. The loss peak caused by molecular motion of the molecules in crystalline regions.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.26-31
• /
• 2004

The radiation-induced changes taking place in poly(vinylidene fluoride) (PVDF) exposed to $^{60}Co$ $\gamma-ray$ irradiation were investigated in correlation with the applied doses. Samples were irradiated in air at room temperature by $^{60}Co$ $\gamma-ray$ to doses in the range of 200 to 1000kGy. Various properties of the irradiated PVDF were studied using FTIR, differential scanning calorimetry (DSC), gel fraction and elongation. $^{60}Co\gamma-ray$ irradiation was found to induce changes in chemical, thermal, mechanical and structural properties of PVDF and such changes vary depending on the radiation dose.

• 멤브레인
• /
• 제17권3호
• /
• pp.233-243
• /
• 2007

본 연구에서는 충전용 이차전지의 분리막으로 쓰이는 다공성 막을 기존의 분리막 재료보다 뛰어난 물성을 나타내는 PVdF(poly(vinylidene fluoride))를 사용하여 상전이 방법으로 제조하였다. 용매인 DMF(N,N-dimethylformamide)에 PVdF를 단일상으로 녹인 후 깨끗한 유리판에 캐스팅하여 막을 얻었다. 얻어진 분리막에서 가장 높은 공극률은 78.6%로 얻어졌다. UTM(universal testing machine)을 이용하여 측정된 분리막의 인장강도는 PVdF 20 wt%에서 5.16 MPa의 값을 나타내었다. 시차주사현미경(scanning electron microscopy, SEM)을 이용하여 분리막의 단면 관찰을 통해 다공성을 확인하였다.

• 멤브레인
• /
• 제27권2호
• /
• pp.189-198
• /
• 2017

본 연구는 수처리 분리막에 제조하기 위하여 열유도 상분리법(thermally induced phase separation, TIPS)을 이용하였고, 기계적 물성과 내화학성이 우수한 폴리플루오르화비닐리덴(poly(vinylidene fluoride)(PVDF)) 고분자와 실리카를 이용하여 특성평가를 진행하였다. 특성평가에 사용된 희석제는 dioctyl phthalate (DOP), dibutyl phthalate (DBP)를 사용하였으며, PVDF와 실리카의 비율에 따른 분리막 제조 조건을 알아보기 위하여 결정화 온도, 흐림점, SEM 이미지 등을 관찰하였다. 실리카의 함량이 증가할수록 결정화 온도와 흐림점이 증가하였음을 확인하였고, 상평형도 작도를 통하여 분리막 제조 조건을 확인하였다.