• Carbon letters
• /
• 제10권2호
• /
• pp.101-108
• /
• 2009

Various silanes, amino silane, vinyl silane, TESPD, and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/hard clay/carbon black (CB) compound and they are investigated with respect to the vulcanization characteristics, the processability, and the mechanical properties. In hard clay/CB filled system, only ZS silane added compound shows both lower Mooney viscosity and extrusion torque while vinyl silane added compound showed only a lower extrusion torque. All the ZS added compounds showed the lowest viscosity among them. The silane added compounds showed an increased modulus. In 'fatigue to failure' count test, the ZS added compound showed superior counts compared to other silane (amino, vinyl, TESPD) added compounds. The mechanical properties were significantly increased when the S2 and ZS were added into CIIR/hard clay/CB compound. The ZS added compounds showed a significant improvement on elongation modulus.

• Carbon letters
• /
• 제10권2호
• /
• pp.109-113
• /
• 2009

Various silanes, amino silane, vinyl silane, TESPD, and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/soft clay/carbon black (CB). The vulcanization characteristics, the processability, and the mechanical properties are measured. In soft clay/CB filled CIIR system, there are no significant changes in Mooney viscosity among compounds. Vinyl silane added compound shows a low extrusion torque. All the silane added compounds shows an increased modulus. The mechanical properties are significantly increased when the S2 is added into CIIR/soft clay/CB compounds.

• Carbon letters
• /
• 제10권3호
• /
• pp.190-197
• /
• 2009

Various silanes, amino silane, vinyl silane, sulfur silane (TESPD), and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/soft clay/carbon black (CB) and CIIR/hard clay/CB compounds and they are investigated with respect to the vulcanization characteristics, the processability, and the mechanical properties. Comparing hard clay and soft clay filled compounds, hard clay (Suprex) filled system shows a higher die C tear than the soft clay (GK) filled one. The other properties (Mooney, extrusion torque/pressure, torque rise ($M_H-M_L$), modulus at 300%) are close to each other. Among various silanes, the ZS treated hard clay (Suprex) compound shows the highest mechanical property following hard clay(S)/vinyl silane(V) and soft clay(GK)/vinyl silane(V) compounds. The TESPD and the ZS effectively helps a formation of a strong 3-dimensional network structure between silica and CIIR via coupling reaction due to bifunctional nature of TESPD. In addition to that, the ZS added compounds show both a better processability and mechanical properties compared to the S2 ones at low concentration due to improved compatibility between zinc soap and CIIR matrix. Only the ZS added compound shows both improved processabilities (Mooney, Extrusion torque-& pressure) and improved mechanical properties (degree of crosslinking, elongation modulus, tear, and fatigue to failure counts) on both CIIR/hard clay/CB and CIIR/soft clay/CB compounds.

• 대한안전경영과학회지
• /
• 제6권1호
• /
• pp.301-309
• /
• 2004

An inorganic filling agent, ATH (alumina trihydrate) was used to induce inorganic-organic coupling by mixing with stearic acid, acryl silane, vinyl silane as surface treatment agents in order to apply as a high voltage insulating material. Volumetric resistivity was shown to vary with surface treatment agents, and the highest value was obtained in case of the mixture with vinyl silane. The dielectric breakdown intensity was shown to decrease gradually and saturate to a stable value, possibly due to the increase of cross link density in the vinyl radicals introduced to silica surface, resulting in stable dielectric breakdown intensity in the final stages. Tracking and flame retardant properties were also shown to be the best among the samples investigated in this study.

• Macromolecular Research
• /
• 제11권3호
• /
• pp.202-205
• /
• 2003

The reactive precursors, vinyl ethers, and epoxy-silicones, were synthesized. The vinyl ether monomers were prepared from primary alcohol and ethyl vinyl ether with mercury (II) acetate. The epoxy-functionalized silicones have been achieved by the controlled, rhodium-catalyzed, chemoselective hydrosilation of vinyl ether with siloxanes or silane. It was shown that the hydrosilation proceeds exclusively at the vinyl ether group of alkenyl vinyl ether without participation at the alkenyl group. The photoinduced cationic polymerization of these monomers was studied and found to be all highly reactive.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2005년도 추계 총회 및 학술발표회
• /
• pp.79-83
• /
• 2005

• 한국세라믹학회지
• /
• 제35권5호
• /
• pp.421-428
• /
• 1998

순수 HAC/PVA 계 및 epoxy 수지와 urethane이 첨가된 HAC/PVA 계 MDF 시멘트 복합재료에 서로 다른 관능기를 갖는 3종류의 silane coupling agent를 첨가하여 강도 및 수분안정성에 대한 영향을 살펴보고 기공율 분석을 통해 미세구조와 강도의 관계를 살펴보았다. Silane의 관능기에 따라 각각의 MDF 시멘트 복합재료의 강도 및 수분안정성 향상에 대한 효과가 다른 것을 알 수 있었다. 순수 PVA 메트릭스의 경우에 대해서는 vinyl 기를 갖는 silane이 효과적인 영향을 나타내었으며 epoxy수지가 첨가된 MDF 시멘트에 대해서는 epoxy-methoxy 기를 갖는 silane이, 그리고 urethane이 첨가된 MDF 시멘트에 대해서는 diamine 기의 silane이 효과적이었다. Silane의 첨가량에 따라서는 urethane이 첨가된 MDF 시멘트 복합재료의 경우, diamine 기의 silane이 많이 첨가될수록 수분안정성이 향상되었으며 특히 2wt%의 silane을 첨가하고 wqrm press를 이용하여 성형하였을 때 건조 강도는 약 20% 향상되었으며 습윤강도는 40~70%까지 크게 향상되었다. 이는 기공율과 밀접한 관계가 있음을 알 수 있었다. Epoxy 수지가 첨가된 MDF 시멘트의 경우에서도 2wt%의 silane 첨가까지는 그 첨갈향이 많아질수록 강도가 향상되는 것을 알 수 있었지만 과량의 silane(4wt%)이 첨가될 경우에서는 오히려 특성저하가 나타났다.

• Elastomers and Composites
• /
• 제38권3호
• /
• pp.227-234
• /
• 2003

배합고무에 각종 표면처리제로 처리한 수산화 알루미늄을 무게비 100:20, 100:40, 100:60, 100:80 및 100:100으로 배합하여 고압애자용 실리콘 복합체(HVI SC)를 제조하였다. 배합 공정에서 지방산, 아크릴 실란 및 비닐 실란등의 표면처리제로 수산화 알루미늄을 표면처리하였다. 수산화알루미늄의 첨가량 및 표면처리제의 종류에 따른 기계적 특성 및 전기적 특성을 연구하였다. 수산화 알루미늄의 첨가량이 증가하면서 인장강도, 신장율 및 인열강도는 감소하였으며, 비닐 실란으로 표면처리한 수산화 알루미늄을 첨가한 HVI SC의 인장강도 및 탄성율은 지방산 및 아크릴 실란을 사용한 HVI SC 보다 우수하였다. 또한 비닐 실란을 사용한 HVI SC의 체적저항, 절연파괴강도 및 내트래킹 특성이 지방산 및 아크릴 실란을 사용한 HVI SC 보다 우수하였다. 표면처리제의 종류에 따른 실리콘 복합체의 고분자 충전작용은 결합고무 함량으로 검토하였다. 실험의 결과로는 비닐 실란을 표면처리제로 사용한 실리콘 복합체의 결합고무 함량이 다른 표면처리제를 사용한 것 보다 높았다 표면처리제의 종류에 따른 실리콘 복합체의 가교밀도는 Rheometer로 측정하였다 비닐 실란을 표면처리한 수산화 알루미늄을 충진한 실리콘복합체의 최대토크가 다른 표면처리제를 사용한 것들 중에 가장 높았다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.206-209
• /
• 2002

The purpose of this research was to find influence of compounding materials on electrical properties of silicone rubber such as tracking characteristic. The tracking characteristic was tested through controlling the ATH, a widely use anti-tracking agent. Regarding the particle size and coupling agent of ATH, compound silicone rubber with ATH of coupling agent and larger diameter showed better anti-tracking properties. It can be included that ATH of coupling agent use vinyl silane, dispose of tracking characteristic was achieve excellant results.

• 한국재료학회지
• /
• 제30권6호
• /
• pp.273-278
• /
• 2020

This research is conducted to analyze the compatibility of used monomers and produce the high functional hydrogel ophthalmic polymer containing silane and nanoparticles. VTMS (vinyltrimethoxysilane), TAVS [Triacetoxy(vinyl)silane] and cobalt oxide nanoparticles are used as additives for the basic combination of SilM (silicone monomer), MMA (methyl methacrylate) and MA (methyl acrylate). Also, the materials are copolymerized with EGDMA (ethylene glycol dimethacrylate) as cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the lenses of all combinations are optically excellent and thus have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic ophthalmic polymer are different in each case. Especially for TAVS, the addition of cobalt oxide nanoparticles increases the oxygen permeability. These materials are considered to create synergy, so they can be used in functional hydrogel ophthalmic lenses.