• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.79-84
• /
• 2012

This study consist of two parts. One is development of a self-propelling vinyl remover which was already reported at the previous paper. This is the second part of the study. For the study, an attached vinyl remover was developed. It was consisted of connecting tractor to bucket, removing bucket from tractor, and the process was the tractor's assistance hydraulics. In the case of an attached vinyl remover, the vinyl was twisted 0.5times per 30~85cm length. The bobbin's diameter was 190mm and it's stable travelling speed was 1m/s. The revolution of the remover wheel was 90rpm to maintain the wheel's linear velocity. As seen at performance test at the field which had 950mm ridge intervals and 10 a area, the average working speed was 1m/s and the turning time was 20seconds. Therefore, the working performance was 24.5min/10a. The efficiency of used vinyl remover was 97% and working conditions were good.

• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.113-118
• /
• 2012

Mulching vinyl is used on field crops to reduce herbicides and this causes multiple effects. The mulching vinyl must be collected for the next crop season, but was left alone due to a shortage of labor. The used mulching vinyl that was left alone acted as one of the main sources of environmental pollution on farms. In order to solve these problems, a self-propelling vinyl remover was developed. The self-propelling vinyl remover consists of a travelling part and rotating of remover wheel. Each output device has a 1.5ps engine and a 2.5ps engine. The vinyl was twisted 17~47cm/times length. The bobbin's diameter was 160mm and it's stable travelling speed was 0.5m/s. The revolution of the remover wheel bobbin was 60rpm to maintain the wheel's linear velocity. As seen at performance test at the field which had 950mm ridge intervals and 10a area, the average working speed was 0.56m/s and the turning time was 15seconds. Therefore, the working performance was 40.1min/10a.

• 전기화학회지
• /
• 제15권3호
• /
• pp.190-197
• /
• 2012

비닐에틸렌 카보네이트(VEC: vinyl ethylene carbonate)를 전해질 첨가제로 사용했을 때 하이브리드 커패시터(hybrid capacitors) 전극에서 나타나는 전기화학적 특성변화에 대해서 고찰하였다. 하이브리드 커패시터는 양극은 활성탄(AC : activated carbon) 음극은 리튬티타늄옥사이드(LTO: $Li_4Ti_5O_{12}$)를 사용하였고, 전해질로서는 에틸렌 카보네이트(EC: ethylene carbonate): 디메틸 카보네이트 (DMC: dimethyl carbonate) : 에틸메틸 카보네이트(EMC : ethyl methyl carbonate)를 사용하였고, 염으로 육불화인산리튬($LiPF_6$: lithium hexafluoro phosphate)을 사용하였다. 전극 표면의 산소관능기 그룹을 제거하고, 표면을 환원시킴으로써 전극에 안정성을 향상시킨다고 알려진 VEC의 첨가량에 따른 전기화학적 특성을 평가하였으며, 0.7%(부피비)의 VEC첨가시, 가장 우수한 전기화학적 특성을 얻을 수 있었다. 0.7% 이상 첨가하였을 경우, 오히려 부반응 증가로 전기화학적 성능이 감소하였다. X-ray photoelectron spectrocopy (XPS) 결과로부터 LTO 전극에서 VEC가 첨가되지 않은 전해질에 비해 LiF가 감소한 것을 확인 할 수 있었다. VEC가 첨가되지 않은 전해질은 2500 사이클 후, 43.2 %의 용량 유지를 나타냈지만, 최적화된 VEC 첨가를 통하여 82.7 %의 높은 용량을 유지하는 특성을 가진 하이브리드 커패시터를 얻을 수 있었다.