• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.5
• /
• pp.905-912
• /
• 2011

In this paper, the method on calculating benefits of combined heat and power is introduced for standard evaluation in electrical power system. This paper calculates benefits about new national viewpoint and viewpoint of independent power producers and assesses benefits of combined heat and power in Korea and In Seoul national capital area. Benefit costs are composed of avoid cost of centralized generation, line upgrading adjustment, loss adjustment and electrical power trade cost per year in earlier study, in addition trade cost of $CO_2$, construction cost of combined heat and power for accurate calculation. Benefit of combined heat and power is calculated by simulation results of real electrical power system.

• Proceedings of the KIEE Conference
• /
• 1999.11a
• /
• pp.35-42
• /
• 1999

As our power system has changed the past undeveloped model causing the lacked supply of power to the civilized model that the remained one makes the voltage and the frequency rise at the middle of the night, the leading power factor operation of generators, that is, the under-exited operation is essentially to be needed, so, at a viewpoint of the stability of the power system, it is a very important factor. In this investigation. the equation of curves for each area on the capability curve has been studied at the above-mentioned viewpoint. Also, each capability curve for the operating power stations (Nuclear P/S, Thermal P/S, Hydrolic & pumping-up P/S Gas turbine P/S) has, been presented, and studied whether the leading power factor operational area is able to be expanded or not.

• Journal of Korean Library and Information Science Society
• /
• v.22
• /
• pp.245-276
• /
• 1995

This study analyzed the process of information service and its factors in the cognitive viewpoint. And developed a conceptual model to help in developing future information systems and services. The results of this study were summarized as follows : 1) The paradigm of information user study is changing from the system-centered to the user-centered one. 2) The researchers describe the user's internal cognitive process as the starting point of the information service. 3) The user's personal cognitive process influence the process of the information service over. And the focus is a microscopic one including the factors of the perception and recognition of the stimulus, remembering and searching information, reasoning the rules, recognition of the patterns, formalization of the concepts, etc. 4) The information librarian performs the role as a knowledge/ information system interface, and his knowledge structure reflects the organization of that knowledge/information system. 5) The information librarians can perform their role as information specialists actively and offensively. And the performance of the librarians can be measured on the scales of the su n.0, pplying capability of relevant information and the client satisfaction.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.401-406
• /
• 2000

Fault tree analysis (FTA) is a widely used methodology for reliability analysis. The method is useful in that it suggests a very comprehensive way of describing the hierarchical relations of causes of faults and the corresponding results. However it is difficult to get appropriate fault trees for given products or systems without very profound knowledge and experience. This work aims to develop a methodology of fault tree construction using the results of function deployment for machine parts, which provides an objective way of preparing fault trees. The failure modes are defined to each function network generated by the function deployment method and the fault tree with respect to each viewpoint is constructed by arranging the failure modes. The fault tree is finally obtained by synthesizing the fault trees with respect to each viewpoint. The example of fault tree construction is also shown.

• Journal of Families and Better Life
• /
• v.22 no.4
• /
• pp.15-27
• /
• 2004

This study investigated the factors in evaluating internet shopping mall sites, and developed a self-report evaluation scale of such sites, This article identifies factors to determine criteria for evaluating the sites from the consumers' viewpoint. Eighty three items were extracted initially, which were then categorized as follows: \circled1 Type of business, \circled2 Navigation ease, \circled3 Technological level, \circled4 Design of sites, \circled5 Communication ease, \circled6 Information available, \circled7 Ease of access, and \circled8 Site security, Overall reliability coefficients were high in the individual domains ($\alpha$=.86 to $\alpha$=.95). Face validity and contents validity were demonstrated to be good, There were significant differences in the means of these categories. The results also show that the technological level is the most important in shopping mall sites evaluation. These results may be used not only as a tool to evaluate shopping mall sites but also as a guideline to improve the quality of a shopping mall site that is under development.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.167-171
• /
• 2008

HwaSungSungYouk was one of the construction project in viewpoint of today's construction management and various information how to build the HwaSung at the last of the eighteen century had been recored in HwaSungSungYoukEuGye. The purpose of this study is to analyse the HwaSungSungYoukEuGye' management technic in viewpoint of today's construction management. In the record, there are a lot of informtion relate to record management, time management, cost management, etc. and the concept of the managements can be applied to today's construction project effectively. The concept and detail of the HwaSungSungYouk's project management should be analysed more.

• The KIPS Transactions:PartB
• /
• v.8B no.5
• /
• pp.573-578
• /
• 2001

This research proposes a generalized local feature structure named "LSG(Local Surface Group) for model-based 3D object recognition". An LSG consists of a surface and its immediately adjacent surface that are simultaneously visible for a given viewpoint. That is, LSG is not a simple feature but a viewpoint-dependent feature structure that contains several attributes such as surface type. color, area, radius, and simultaneously adjacent surface. In addition, we have developed a new method based on Bayesian theory that computes a measure of how distinct an LSG is compared to other LSGs for the purpose of object recognition. We have experimented the proposed methods on an object databaed composed of twenty 3d object. The experimental results show that LSG and the Bayesian computing method can be successfully employed to achieve rapid 3D object recognition.

• Journal of Families and Better Life
• /
• v.24 no.2 s.80
• /
• pp.1-13
• /
• 2006

The Purpose or this research is to examine the trend or sender gap within a globalization context from 1993 to 2003 on the perspective of feminists who contend that globalization has negative effects on women on account of its masculine nature against neo-liberal viewpoint emphasizing economic efficiency and rationality. As the result of review of statistical and qualitative resources in workforce, it was found that the gender gap has trended toward increasing in some sectors such as flexible labor and high wage jobs, which shows that gender segregation by irrational culture exists in workforce. The evidence to support the neo-liberal viewpoint supposing that the gender discrimination will disappear was also found in sector of wage. The gender gap in wage has decreased during the period of globalization. The dispute of feminists was partly supported, so it was suggested that the policies for gender empowerment should be enforced to diminish gender gap that would be able to increase in the process of globalization.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.167.6-167
• /
• 2001

The cylindrical environment maps of image-based representation methods make high-quality, simple and low-price real-time navigation possible. In this paper, we propose a method to navigate from one viewpoint to the next in the virtual inside space, composed of several cylindrical environment maps. Our system is classified into the two modules. first of all, the panoramic image viewer that employs the rotation and zoom-in/out methods to navigate the virtual inside space, such as the Quicklime VR. The other is smooth real-time navigation using cubic mesh interpolation when the viewpoint moves from one environment map to another in the virtual space.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.129.2-129
• /
• 2001

Visual effects are important cues for providing occupant s with virtual reality in a vehicle simulator which imitates real driving. The viewpoint of an occupant is sensitively dependent upon the occupant´s posture, therefore, the total body motion must be considered in a graphic simulator. A real time simulation is required for the dynamic analysis of complex human body motion. This study attempts to apply a neural network to the motion analysis in various driving situations. A full car of medium-sized vehicles was selected and modeled, and then analyzed using ADAMS in such driving conditions as bump-pass and acceleration. A multibody system analysis software, MADYMO, was used in the motion analysis of an adult male dummy in the seated position. Position data of the head were collected as inputs to the viewpoint movement. Based on these data, a back- propagation neural network was ...