• 한국의류학회지
• /
• 제14권3호
• /
• pp.208-215
• /
• 1990

The purpose of this study is to provide the fundamental data of a dummy design for more suitable ready made clothing by making a pattern of somatic types and analyzing their morphological characteristics in accordance with different pattern of somatic types. The side view silhouettes of 90 junior high school girls of age $13\~16$ in seoul urban area were measured by means of the plan photographing and the low data were examined by principal component analysis, while the principal component analysis was applied and three components were extracted and then interpreted to explain to variation of the form of the body. Using three components respectively the cluster analysis was carried out and the subject classified into 4 cluster The following outcomes are obtained. . The results of principal component analysis of this study would be turned out the three; 1) The first principal component shows the degree of erectness or stoop of the figure. 2) The second principal component was a stature length or a growth rate. 3) The third principal component was the obesity component. 2. The results of cluster analysis by using three principal component analysis would be turned out the four cluser; 1) Cluster 1 ($29\%$ of the total) is characterized with lower stature. 2) Cluster 2 ($21\%$ of the total) is characterized with backward somatotype, and the highest leg. 3) Cluster 3 ($23\%$ of the total) is thicked back of neck. 4) Cluster 4 ($27\%$ of the total) is characterized with forward somatotype, and highest stature, height.

• 대한족부족관절학회지
• /
• 제20권1호
• /
• pp.27-31
• /
• 2016

Purpose: Several techniques have been introduced for correction of pes cavo-varus deformity. We retrospectively reviewed and compared the data of patients who underwent 1st metatarsal osteotomy alone, Dwyer's osteotomy alone, and 1st metatarsal osteotomy combined with Dwyer's osteotomy to determine the effect on radiographic parameters. Materials and Methods: Data on 28 cases in 27 consecutive patients recruited from 2006 to 2014 who underwent 1st metatarsal osteotomy alone (group F), Dwyer's osteotomy alone (group H), or 1st metatarsal osteotomy followed by Dwyer's osteotomy (group HF) with a minimum 1-year follow-up were reviewed retrospectively. Results: Calcaneal pitch angle on the standing foot lateral radiographs was significantly decreased after the operation in groups H and HF whereas Meary angle was decreased in groups F and HF. Hindfoot alignment angle and ratio on the hindfoot alignment view were improved in groups H and HF. Maximal medial cuneiform height reduction was observed in group HF. 1st ray was significantly shortened in groups F and HF. Conclusion: Combined forefoot and hindfoot operation took the largest correction power of all radiologic parameters.

• 감성과학
• /
• 제5권4호
• /
• pp.1-10
• /
• 2002

개인별 신체 특성을 나타내는 가상피팅모델을 이용하여 제공되는 가상 착용 서비스는 웹을 기반으로 한 인터넷 의류 쇼핑의 흥미를 더해준다. 본 연구의 연구자들은 2000년과 2002년에 개발된 미국의 가상피팅모델과 국내에서 개발되었던 가상피팅모델의 개발 기술의 특성과 변화를 분석하였다. 연구결과는 가상피팅모델의 구축을 위해서는 인체의 치수, 형태, 얼굴의 특징들에 관한 정보 입력이 필요하며, 이때 요구되는 정보는 미국과 한국의 사이트에서 차이가 있음을 밝혔다. 미국의 사이트는 정면이나 측면의 실루엣에 대한 정보의 입력이 요구되는 반면 한국의 사이트는 더 많은 인체 치수 관련 정보를 요구하였다. 2000년에 개발되었던 한국의 가상피팅모델은 길고 좁은 프로포션으로 표현되어 사실적인 표현이 부족하였던 반면 2002년 미국에서 개발한 가상피팅모델은 다양한 인종의 특성을 반영하며, 그래픽 기술의 발전으로 사실적으로 표현된 가상피팅모델을 제공하는 것으로 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.694-699
• /
• 2002

As the demand for slim laptops requires ion'-height optical disc drives, vibration problems of optical disc drives are of great concern. Additionally, with the decrease of a track width and a depth of focus in high density drives, studies on vibration resonance between mechanical parts become more important. From the vibration point of view, the performance of optical disc drives is closely related with the relative displacement between a disc and an objective lens which is controlled by servo mechanism. In other words, to read and write data properly, the relative displacement between an optical disc and an objective lens should be within a certain limit. The relative displacement is dependent on not only an anti-vibration mechanism design but also servo control capability. Good servo controls can make compensation for poor mechanisms, and vice versa. In a usual development process, robustness of the anti-vibration mechanism is always verified with the servo control of an objective lens. Engineers partially modify servo gain margin in case of a data reading error. This modification cannot correct the data reading error occasionally and the mechanism should be redesigned more robustly. Therefore it is necessary to verify a mechanism with respect to the possible servo gain plot. In this study we propose the experimental verification method far anti-vibration mechanism with respect to the existing servo gain plot. This method verifies axial vibration characteristics of optical disc drives on the basis of transmissibility. Using this method, we verified our mechanism and modified the mechanism for better anti-vibration characteristics.

• 패션비즈니스
• /
• 제8권5호
• /
• pp.1-19
• /
• 2004

With a view to providing the basic data of clothing manufacturing for Chinese women in their 20s residing in Ningbo City, Zhejiangsheng, China, this study analyzes their upper-body types. With the subjects of 192 female adults(age 20 to 29), the following conclusions were made: 1. According to the Chinese standard classification, all body types except C were seen: A(58.33%), Y(40.63%), and B(1.04%). 2. According to the Korean standard classification, body types appeared in the order of H(68.75%), N(29.17%), and A(2.08%). 3. $R\ddot{o}hrer$ index was 1.23 belonging to the ordinary somatotype. The distribution was ordinary(60.42%), slim(38.54%), and fat(1.04%). 4. The subjects were 158.62cm(height), 83.54cm(bust), 65.77cm(waist), and 87.50cm(hip). 5. No significant differences were noticed in all the items except waist breadth around age 24. 6. Compared with Korean counterparts, Chinese females were a little shorter, had bigger bust, similar waist, and smaller and flatter hips. 7. Seen in the side somatotype classification, a standard body type was revealed with $24.50^{\circ}$ of a slightly-leaning shoulder gradient. 8. Seven factors were produced in the present analysis, and five body types in the group analysis turned out to be standard.

• 한국의류학회지
• /
• 제1권1호
• /
• pp.1-5
• /
• 1977

'Adolescence' is a critical period in the process of growing and aging but important in that an adolescent becomes aware of and begins to look about him or her self. Especially with girls in their late teens (15$\~$18), they pay more attention to their looks and clothes than the boys do, which affects to some extent the formation of their personality and their behavior. From this point .of view. it is significant to establish the standard size of high-school girls' clothes. This study aims to measure high-school girls in size and to establish the standard size of their clothes; furthermore. to enable them to lead a satisfactory living with more appropriate size of clothes. The results, analyzed by two different representing items which resulted in little difference, are as belows: 1) Stature had a significant correlation with posterior waist height; bust girth had the most significant correlation with weight. and also some considerable correlation with other representing items; 2) The F-test result showed significant difference on $1\%$ level over all the items between the measured (Y) and the estimated (Y); the correlation among the representing items was considerable also; 3) When the measurement increases in stature by 4cm, bust girth by 4cm. and posterior shoulder width by 2cm respectively, the increase or decrease in other items are as shown on Table 4. Since this study was carried out in girls' high-schools in Seoul, it is expected to extend its further study throughout the nation. thus contributing to comprehending the whole truth of people's body-size and promoting the fabrication and modelling of the original clothes for the nation by the strict standard size up to making ready-made clothes with no difficulty in setting the standard and model size.

• Journal of Biosystems Engineering
• /
• 제24권1호
• /
• pp.19-24
• /
• 1999

Motivated by the need for developing the more efficient lighting system for light culture of strawberries in the greenhouse, this paper aims at acquiring and suggesting more concrete and scientific foundation of illuminating position, numbers of light source by investigating the types of lighting system and illumination distribution in the greenhouse for light culture of strawberries. The results of investigation and experiment are summarized as following below: 1. The types of lighting system used in the greenhouse producing strawberries were classified as 1 line and 2 lines lighting system. 2. As for the arranging types of artificial light, 2 lines lighting system, were classified as Z-type, N-type and W-type. (Refer Fig. 3) 3. The results of illumination distribution for Z-type, N-type and W-type of 2 lines illuminating system in the greenhouse with a small size tunnel measured at the height of 1.5m from the ground with 220V, 100W lamp in 6m light gap showed that maximum illuminance are 961x, 1211x, 1251x, minimum illuminance are 4.41x, 4.71x, average illuminance are 33.71x, 43.11x, 44.51x and standard deviations are 28.31x, 35.41x, 38.31x at each types. 4. Proportion of the area below optimal illuminance to floor area at the two lines illuminating system of Z-, N-, and W-type in greenhouse were appeared as 39.4%, 26.0% and 26.3%, respectively. Also proportion of the area over optimal illuminance to floor area at the two lines illuminating system of Z-, N-, W-type in greenhouse were appeared as 16.8%, 14% and 14.7%, respectively. Thus N-type was superior to the others from the view points of optimal illumination distribution and energy saving.

• 패션비즈니스
• /
• 제9권2호
• /
• pp.113-130
• /
• 2005

With a view to developing male dress forms for educational purposes, human body measurement was made for male adults in their twenties residing in Busan, Korea. Based on the results, the following conclusion was obtained: 1. Comparison d the measurement in Busan and the data of the 5th Korean physical dimensions(Size Korea) In the comparison of the Busan male adults in their 20s with national physical dimensions(Size Korea) by way of the Mollison relational deviation line, all the 28 items revealed differences less than 0.7. As the Busan sample reflects the body type d the average Korean men in their 20s, Busan's measurement results can be safely used as the data for dress form development. 2. Results of front body type classification According to the factor analysis, seven factors of the front body type were produced to explain 77.25%. The factors were shoulder angles, waist height, hip shapes, chest shapes, proportion of body(chest, waist, hip)width to shoulder width and so on. Cluster analysis brought about three somatotype groups. First, the body type with the least differences in hip-waist width, shoulder-waist with, and hip angles (24,23% in appearance) was named Type H. Second, the body type with the most chest-waist width and hip angles (38.66% in appearance) was called Type Sam X Third, the body type with the greatest shoulder-chest width, shoulder-hip width, and shoulder angles (37.11% in appearance) was termed Type Y.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년도 춘계학술발표대회 논문집
• /
• pp.421-426
• /
• 2008

In case of the large-scaled indoor gymnasium that has been constructed in the local area, there are many instances for the use as multipurpose space where the public performances are possible such as leisure activity, lecture, assembling activity, drama, concert and so on for the resident together with the purpose of sporting facility. In order for utilization to the maximum of the function of such indoor gymnasium, the acoustic capabilities concerned with Definition of both Voice and Music are simultaneously required. However, in case of the large-scaled athletic facility, since it was designed with high ceiling-height in view of its characteristics, it forms a Sound Focus and then the sound is concentrating to the specific part, and because the vibration of sound is too loud due to its broad volume, the acoustic defects such as many Echoes are arising. On such viewpoint, based on the drawing of the indoor gymnasium that is scheduled to be built at B County, Chonbuk Province, this Study has proposed such indoor gymnasium equipped with the optimized acoustic condition passing through Acoustic Simulation Phase. As the result of Acoustic Simulation, we could design the indoor gymnasium that equipped with really satisfying acoustic performance 'after' reformation compared with 'before' reformation, and it is considering that such material could be utilized as the fundamental material that brings a curtailment effect of the construction cost and also enables us to improve the acoustic performance, at the stage of planning and designing for the similar sporting facility in the future.

• 디지털콘텐츠학회 논문지
• /
• 제8권3호
• /
• pp.263-267
• /
• 2007

본 연구는 지하공간에서의 보행자의 정보 활용에 관한 연구의 일환으로 대전시 지하상가를 중심으로, 보행자의 보행 타입으로부터 사인의 이용 타입을 밝혀내는 것을 목적으로 두 가지의 분석을 실시하였다. 첫째, 피험자가 통과한 경로의 체크에 의한 보행선형을 비교하였다. 둘째, 피험자가 이용한 사인을 보행동선과 사인의 이용 상황, 사인의 설치장소, 사인의 높이 등과의 관계에 있어서 구간별로 분석을 할 경우의 동선의 타입을 분류하였다. 위 분석 결과, 장소에 따른 배치 문제가 설치수와 이용률과의 차이에 있는 경우에 정보의 이용률을 높이기 위해서는 안내정보의 내용과 설치장소를 다양하게 해야 할 필요가 있으며, 피험자의 보행특성에서 나타난 과제해결에 대해서는 장소와 장소가 접하는 곳의 정보제공의 필요성 등을 제시하였다.