• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.385-392
• /
• 2010

A LiDAR technique has the merits that survey engineers can get a large number of measurements with high precision quickly. Aerial photos and satellite sensor images are used for generating 3D spatial images which are matched with the map coordinates and elevation data from digital topographic files. Also, those images are used for matching with 3D spatial image contents through perspective view condition composed along to the designated roads until arrival the corresponding location. Recently, 3D aviation image could be generated by various digital data. The advanced geographical methods for guidance of the destination road are experimented under the GIS environments. More information and access designated are guided by the multimedia contents on internet or from the public tour information desk using the simulation images. The height data based on LiDAR is transformed into DEM, and the real time unification of the vector via digital image mapping and raster via extract evaluation are transformed to trace the generated model of 3-dimensional downtown building along to the long distance for 3D tract model generation.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.177-188
• /
• 1997

A pepper harvester using a pair of counter rotating helically wound cylinders as a pepper removal mechanism has been developed. Pepper harvesting by machines under the customary cultivation practice was expected to lower land productivity, that most farmers were concerned about. As one way to compensate for loss in land productivity by machine harvest, experts on pepper cultivation suggested change of both varieties and plant density per area. From the view of machine design, their suggestion implied that distance between rows should be narrower and height of the pepper removal mechanism could be shorter. Experiments to improve perfect pepper recovery ratio and to reduce size of the pepper removal mechanism was accomplished. In order to be a economically feasible harvester, minimum pepper recovery ratio was required to be greater or equal to 80%. The research goal was achieved by both reducing the diameter of the wire-helices from 30 cm to 18 cm and increasing rotational speed of the wire-helices up to 425 rpm. The best perfect pepper recovery ratio was 82.3%. Validity of experiment design and interpretation on statistical analysis were discussed. To understand the pepper removal mechanism properly, a pepper removal theory based physics was judged to be necessary.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.571-578
• /
• 2009

Recently, micropiling techniques are increasingly applied in foundation rehabilitation/underpinning and seismic retrofitting projects where working space provides the limited access for conventional piling methods. Micropiling techniques provide environmental-friendly methods for minimizing disturbance to adjacent structures, ground, and the environment. Its installation is possible in restrictive area and general ground conditions. The cardinal features that the installation procedures cause minimal vibration and noise and require very low ceiling height make the micropiling methods to be commonly used for underpin existing structures. In the design point of view, the current practice obligates the bearing capacity of micropile to be obtained from skin friction of only rock-socketing area, in which it implies the frictional resistance of upper soil layer is ignored in the design process. In this paper, a new micropiling method and its verification studies via field installation are presented. The new method provides a specific way to grout bore-hole to increase frictional resistance between surrounding soil and pile-structure and it allows to consider the skin friction of micropiles for upper soil layer during design process.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.155-160
• /
• 1993

A design method for web frame scantling on engine room structures was described. The parameters determining the scantling of web frame were studied on the basis of the empirical ship's data. It is found that the parameters determining the scanting of web frame consist of tween deck height, main engine and propeller excitation frequency, scantling draft, web frame spacing, the number of decks and main engine BHP etc. And a formula proposed by empirical ship's data was established in view points of static and dynamic structural behavior. In this study, it can be shown that at initial design stage, a method for web frame scantling of engine room structure is provided as very practical design processes.

• Journal of the Korean Home Economics Association
• /
• v.34 no.2
• /
• pp.183-199
• /
• 1996

The objective of this study was to provide fundamental data on somatotype for elderly women by classifying the somatotype and analysing the 3 characteristics of their somatotype. The subject were 368 women of 60~84 years old, they were analyzed indirect photography. To find out differences among the age groups, the 368 subjects were grouped into two age groups (Group 1 ; age 60 to 69, Group 2 ; aged 70 to 84). Data were analyzed using Factor analysis, Cluster analysis, duncan test and Analysis of variance. Through the factor analysis, 27 items from photometric measurements respectively. Cluster analysis was applied for classification of somatotype. The results of this study were as follows. 1. The characteristics of Elderly women's somatotype were bending of the upper-torso, fatness of the waist and abdomen, drooping of the bust and shoulder and hip. In addition, height, girth, depth and width items were decreased in their sizes respectively. 2. The characteristics of clusters were as follows. Type 1 was straight somatotype in which the plumb line through tragion, the bust depth and under bust depth region laterally. Type 2 was swayback somatotype in which the upper portion of protruding point on the back was bent forward but the lower portion of protruding point had a characteristics of turning over somatotype. Type 3 was bending somatotype. Namely, this type was shorter than average and below the average fatness. Generally, the lateral view silhouette of elderly women was the straight type and changed into bending type as the age increases.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.4
• /
• pp.15-21
• /
• 2008

From the practical point of view, general retaining wall systems, such as gravity wall, cantilever wall and reinforced wall, have several problems. As a countermeasure, precast block type retaining wall systems have been developed and used for the various purposes of construction. The retaining wall systems can be applied not only for mechanical purpose but environmentally friendly aspects by changing the shapes of surface plates and planting on the surface plates. On the other hand, the bulging failure was dominant near the center of wall height. Therefore, an individual block has to be estimated for the stability problem related to turnover and the for design of gravity block type wall. On the basis of this result, the optimum section of the wall has to be determined.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.121-127
• /
• 2003

Wave overtopping is one of the most important hydraulic responses of breakwater because it significantly affects its functional efficiency, the safety of transit and mooring on the rear side, wave transmission in the sheltered area, rear side armor stones and to some extent, the structural safety itself. In this study, hydraulic model tests has been carried out to investigate the influence of berm's size on overtopping rate by maximum overtopping rate and mean overtopping rate. The hydrodynamic characteristics of berm breakwater by the overtopping rate can be summarized as follows: 1. It is better to use maximum overtopping rate than to use mean overtopping rate for design of coastal structures in the point of view of stability. 2. When construct berm to decrease energy of waves that it was needed to make breaking conditions of wave on the berm. 3. Under the relative length of berm was over 0.13 overtopping rate was significantly decreased. 4. Overtopping rate affected significantly by the relative length of yhe berm than height of the berm.

• Journal of the Korean Institute of Rural Architecture
• /
• v.7 no.3
• /
• pp.109-118
• /
• 2005

This study is to find out the plan intention of the central space through visual analysis on the east and west stone pagodas relative to a main Buddhist hall, and the relation between the stone pagodas in Hwaeomsa.(華嚴寺) According to the analysis of it in this study, we make conclusions as follows; 1) The east and west stone pagodas was arranged with overlapping each Daeungjeon(大雄殿) and Gakhwangjeon(覺皇殿) for the view of a specific viewpoint, on the right of Bojeru(普濟樓). 2) The centering around a compositive axis which connect Gakhwangjeon, stone lantern, and stairs, the axis of two stone pagodas is not coincident. 3) Courtyard in Hwaeomsa is separated by high a stone wall for reinforcement, but it is integrated into visual perception owing to height of two stone pagodas connected visual line to Daeungjeon and Gakhwangjeon.

• Korean Institute of Interior Design Journal
• /
• v.15 no.3 s.56
• /
• pp.144-154
• /
• 2006

Except the time when relics of a museum are exhibited or loaned to the public, they are stored in a storage. In addition, it is common view that collections are exhibited a few of total stored collections in a museum. Therefore, the environmental condition of a storage is an important factor. Hereby, the purpose of this study is to suggest the design guidelines of a storage for conservation of relics in a museum. The results from this study are as follows briefly. First, location of storages has to be located and centralized above ground against preservation environment and additional renovation. Second, for storage size, It is reasonable to secure long-term experimental data after planning about 20% of whole section in present domestic situation. Third, in order to prevent environmental deterioration due to short storage floor space, adequate storage height has to be secured against a mezzanine deck and spare storages need to be planned. Where a mezzanine deck is designed, detailed plans have to be supported for equal micro climate in a storage. Fourth, in respect of environmental control of storages, finish materials with adjustment ability on relative humidity have to be used after the system is installed jointly direct and indirect way by air chamber, considering domestic condition for management of intermittent ventilation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.22 no.1
• /
• pp.135-148
• /
• 1994

When we put a construction on the space organization form of Seyeon-jong garden through a consequence of drawing analysis, we were able to certify that a certain space construction principle was applied as following. First, the arrangement and organization of space construction element embodied systematic order y clearing the character of space, and heightening the degree of cognizance with the means of functionability, scale, height, decorationability, an inclination of artificiality and nature, systemetic approchability. Second, the space construction element of Seyeon-jong garden pursued a harmony of human work and nature for creating a various atmosphere and visual quality. Third, Seyeon-jong garden constructed the space by establishing the measurement of human scale that introduced a conception of near, middle, distant view on the visual angle. Forth, Yun go san introduced the natural shape of 'The song of five friends' as a construction element, and represented the symbolism that he had seeked for throught he arrangement method, christening, composing technique of the space construction element for expressing ideal space which is described in 'The four season song of fishermen' spatially at Seyeon-jong garden. As the results of this study, that Yun go san created his own ideal space that he longed for at Seyeon-jong garden with applying fixed design system, and he realized his will that he strived to form a complete whole in perfect harmony.