• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11b
• /
• pp.183-195
• /
• 2000

Slopes near a dam body can be categorized into 4 groups, such as right and left abutment slopes, reservoir slopes, slopes along the access road and slopes along the relocated road. For each of the geological investigation, the design standards, the evaluation methods of safety and the maintenance methods, both abutment slopes in the four dams have different characteristics from the conventional cut slopes in that they can severely affect the dam safety. From this point of view this study compares and analyzes the geological investigation methods, the status of design and construction, evaluation method of safety, and monitoring & maintaining methods for four major dams in Korea, such as Soyanggang dam, 'Andong dam, Chungju dam and Boryong dam.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1477-1486
• /
• 1997

Conventioally the decoding methods and the design of coset codes for burst synchronization and error detection have been based on the concept that slips occuring to the right or to the left with respect to a reference timing are corrected. In this paper we newly approach to the design of coset codes relying on the condition that only a single code word can exists in an observation interval, which provides an extentended view on the conventional approach. A theorem concerning the condition is presented. A combined burst synchronization and error detection system with maximum slip correction capability have been devised based on the theorem and a detection method is falsely accepted in the presented of channel errors. The false acceptance probabilities of the system are derived and its performance is analyzed through computer computation using the derived results.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.972-977
• /
• 2009

For the improvement of a train speed in the conventional line from overhead system point of view, it is necessary to approach not only in the aspect of the increasement of tension for catenary but the application of a pre-sag. A certain tension acting on a dropper is removed when it is slack by the pantograph passing. Right after the pantograph passes, the dynamic force caused by the mass of contact wire acts on the dropper. If the pre-sag is applied to the catenary, the static force on the dropper is increased. For the assurance of the safety for the dropper, it is necessary to predict the dynamic force. The purpose of this study is to predict and analyze the force on the dropper according to the applied pre-sag.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.11
• /
• pp.925-933
• /
• 1991

Conventional stereo matching techniques are based on the assumption that the features representing an object in left and right images have fixed attribute values. But, in fact, such features may take different values due to the practical stereo image formation and the image acquisition error, and thus the conventional techniques tend to result in the in the incorrect matching of features. In this paper, we propose a stereo matching mathod with a possibilistic view which copes with the possible variability of feature values. As a result, this method decreases the number of incorrect matching features when the values of corresponding features are somewhat large. The effectiveness of the proposed method is shown via computer simulation.

• Journal of Industrial Technology
• /
• v.20 no.B
• /
• pp.21-26
• /
• 2000

Heat loss, fin effectiveness and efficiency of a plate fin are investigated as a function of non-dimensional fin length and Biot number using a two-dimensional separation of variables method. The value of temperature of the left side is set to be different from that of the right side for this plate fin to satisfy the real physical condition. Also temperature distribution within this plate fin is listed. One of the results shows that the fin can be considered to be useful in view of fin effectiveness on the given range of Biot number when non-dimensional fin length is larger than 3.

• Journal of the Korean Home Economics Association
• /
• v.40 no.12
• /
• pp.159-170
• /
• 2002

This study, with a view to establishing the objective and concrete methodology of partition of properly by the married couple in the process of divorce, is to suggest the calculation method of impartial division of property by means of applying the system to division of remainder used in Germany. Generally, the process of estimating the amount of partitioned property has two steps, the first of which is to calculate the remainder of the husband and the wife each. The second step is to compare the remainders of the couple and calculate the difference in order for the spouse who has more to claim the payment of a half of the difference. This method has the advantage of dividing impartially the remainder obtained by labor in the married life.

• International Commerce and Information Review
• /
• v.8 no.1
• /
• pp.205-223
• /
• 2006

File sharing through P2P was decided as illegal according to Supreme Court of the U.S. and the Highest Court of Korea in 2005. Metro-Goldwyn-Mayer Studios Inc. et al. v. Grokster, LTD., et al. and Soribada v. Korea Association for Music Providers have the same ground for decision. P2P service company has vicarious liability for illegal file sharing of its customers. Balance between copyright protection and development of technology was considered in that decision. Programmer who will develop new program for free download and copyright holders who will exploit every measures to protect their right may compromise for their mutual benefits.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.324-329
• /
• 2009

This paper is to provide problems and changes to be don Korean Green Building Certification Criteria, which are similar to American Leed certification and Japanese CASBBE, reorganizing and comparing those systems with domestic system. Normally, those certification program is very similar, but have some differences in the view to the site and environment chapter. That difference will be change to the right way that protect the nature states of the environment. Therefore, this study is going to base data to first step of the process for modify the differency problem.

• Journal of Chest Surgery
• /
• v.3 no.2
• /
• pp.139-142
• /
• 1970

A Case of thoraco-abdominal aortic aneurysm involving from the lower descending- thoracic aorta to bifurcation of abdominal aorta into both common iliac artery is presented in special view-point of its surgical technic and postoperative complication. Operative technic is the most popular method of Dr. De Bakey's shunt of Dacron which is bridging thoracic aorta to terminal abdominal aorta primarily as temporary shunt but after anastomosing the individual hranch of left Renal, Celiac, Sup. meseateric and right Renal artery to corresponding part of the Dacron tube, the Dacroa graft is fixed as permanent graft in stead of excised thoraco-abdominal aorta. The patient died of acute renal failure and increasing evidence of CNS damage due to respiratory acidosis on 6th postoperative day hut this report will he a good experience in respect of further progress of aortic surgery in Korea.

• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1403-1412
• /
• 2019

A coupled inductor-dual boost-inverter (CIDBI) with a differential structure has been presented for application to a micro-inverter photovoltaic module system due to its turn ratio of a high-voltage level. However, it is difficult to design a CIDBI converter with a conventional PI regulator to be stable and achieve good dynamic performance, given the fact that it is a high order system. In view of this situation, a sliding mode control (SMC) strategy is introduced in this paper, and two different sliding mode controllers (SMCs) are proposed and adopted in the left and right side of two Boost sub-circuits to implement the corresponding regulation of the voltage and current. The schemes of the SMCs have been elaborated in this paper including the establishment of a system variable structure model, selection of the sliding surface, determination of the control law, and presentation of the reaching conditions and sliding domain. Finally, the mathematic analysis and the proposed SMC are verified by experimental results.