• Title/Summary/Keyword: View of work

Search Result 1,424, Processing Time 0.028 seconds

A Study on the Development of System Scaffolding for Elevator Installation Work (엘리베이터 설치 작업용 시스템 비계 개발에 관한 연구)

  • Hwang, Jong Moon;Lee, Ki Yeol;Lee, Kyung-Sun;Jeon, Du Seung
    • Journal of the Korean Society of Safety
    • /
    • v.37 no.4
    • /
    • pp.51-57
    • /
    • 2022
  • In recent years, the government's urban housing expansion policy has resulted in increased construction and remodeling work of residential houses and apartments, causing more industrial accidents at elevator installation sites. Typically, accidents occur during the installation and dismantling of work scaffolds inside the hoistways or using non-standardized work scaffolds due to their structural instability. In view of this, the present study deals with the development of a standardized elevator system scaffolding that can be safely installed outside the hoistway, securing the work platform inside the hoistway. An improved version of the scaffolding system eliminates the need to enter the hoistway for the scaffolding installation, thereby preventing accidents.

Productivity Analysis of Rebar Works in Apartment Housing Construction Project (공동주택 철근공사의 현장분석을 통한 생산성에 관한 연구)

  • Ha, Gee-Joo;Choi, Min-Kwon;Yi, Dong-Ryul;Ha, Young-Joo;Ha, Min-Su;Ha, Jae-Hoon
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2010.05a
    • /
    • pp.165-166
    • /
    • 2010
  • In this study, it was accomplished to analyze the productivity and manpower through the activity of rebar work for the application of rational construction cost in apartment house. And the rebar work is very important in the view of the expense and safety, and durability in the construction of R/C structure. Also the rebar work is very affected with productivity owing to the lack of manpower and materials cost rise.

  • PDF

Young Tolstoy's View of the World in His Short Story (중편 『네흘류도프 공작의 수기 중에서. 루체른』에 나타난 청년 톨스토이의 세계인식의 문제)

  • Kim, Sung IL
    • Cross-Cultural Studies
    • /
    • v.21
    • /
    • pp.7-29
    • /
    • 2010
  • Young Tolstoy, when he was an already well-known writer, accomplished his first overseas travel in 1857, which gave him imaginable opportunities to compare his country's social strata with others such as serfdom, monarchical Russia and industrial and capital Europe. The present story is, indeed, the work which is influenced by those experiences by young Tolstoy during his first journey into Europe. Written in the form of booklet-like-small-piece, rather than an artistic work, the text presents the writer's severe criticism on the world of nature and civilization. Close to the nature itself, narod are those common people for Tolstoy, and they represent love, while the nature creates a necessity to love, hope and bottomless happiness of life. On the contrary, the civilized or civilization itself is considered artificial, willy, reasonal, and erotic congruity among people. For the writer, the most unsafe and ugly, seamy side of the westernized society is a lack of necessity to unify people to people. Though in its early embryonic stage, young Tolstoy's worldview is reflected in this work, especially his sharp tongue on the western people and their society is also detected when the write imposes his message under the mask of a gypsy singer. In addition, the narrator who seems an obvious Tolstoy's mouthpiece delivers his own ideas and impression on the western world, history, art, and literature. For this very reason, the present work contains numerous signs from which the reader is able to interpret, understand, and figure out what young Tolstoy imposes for his work.

Development of Automatic Voltage Control Equipment using LabVIEW Software (LabVIEW를 이용한 TIG 용접 자동 전압 제어 장치 개발)

  • Song, Sang-Eun;Jeong, Young Cheol;Cho, Young Tae;Jung, Yoon-Gyo
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.16 no.1
    • /
    • pp.112-117
    • /
    • 2017
  • The arc, generated by Tungsten Inert Gas(TIG) welding, is stable and provides excellent quality of the weld. Since automation is difficult, a lot of work is performed by hand. In addition, to obtain the uniform weld quality is difficult when using a base metal having a nonuniform welding line, or when welding inside a pipe. Generally, TIG welding power has the characteristic of constant-current. The welding voltage is changed in proportion to the arc length. Hence, the automatic voltage control equipment should be applied at the TIG welding system. The automatic voltage control equipment has been designed using LabVIEW software. It consists of a manufactured voltage divider circuit, and jig for moving the torch. The voltage measurements and driving of the motor were performed through the algorithm implementation in LabVIEW. Welding was conducted while increasing the arc length. In this process, it was confirmed that the automatic voltage control equipment kept the arc length constant.

A Study on Gain Scheduling Programming with the Fuzzy Logic Controller of a 6-axis Articulated Robot using LabVIEW® (LabVIEW®를 이용한 6축 수직 다관절 로봇의 퍼지 로직이 적용된 게인 스케줄링 프로그래밍에 관한 연구)

  • Kang, Seok-Jeong;Chung, Won-Jee;Park, Seung-Kyu;Noe, Sung Hun
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.16 no.4
    • /
    • pp.113-118
    • /
    • 2017
  • As the demand for industrial robots and Automated Guided Vehicles (AGVs) increases, higher performance is also required from them. Fuzzy controllers, as part of an intelligent control system, are a direct control method that leverages human knowledge and experience to easily control highly nonlinear, uncertain, and complex systems. This paper uses a $LabVIEW^{(R)}-based$ fuzzy controller with gain scheduling to demonstrate better performance than one could obtain with a fuzzy controller alone. First, the work area was set based on forward kinematics and inverse kinematics programs. Next, $LabVIEW^{(R)}$ was used to configure the fuzzy controller and perform the gain scheduling. Finally, the proposed fuzzy gain scheduling controller was compared with to controllers without gain scheduling.

Development of Pipe-Inserted Cast Die for Press Forming Process Using Ansys and LabView (Ansys와 LabView를 이용한 프레스 성형용 파이프 인서트 주조금형 개발)

  • Lho, Tae-Jung;Choi, Hyeon-Chang
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.10 no.12
    • /
    • pp.3559-3566
    • /
    • 2009
  • Heating and cooling plate are separately used for heating and cooling cast dies for footwear parts. However, this has a disadvantage that it takes a long time to manufacture footwear parts etc.. In the present study, the pipe-inserted cast die for press forming process was proposed to substitute heating and cooling plate. The temperature distribution on the pipe-inserted cast die was analyzed by numerical work using a FEM. And its temperature was measured by LabView. A manufacturing by the pipe-inserted cast die for press forming process was effectively verified, especially in a productivity.

Analysis of Welding Positions for Reduction of Musculoskeletal Disorders Based on Simulation Technique (시뮬레이션 기법에 기초한 근골격계 질환 감소를 위한 용접자세 분석)

  • Park, Ju-Yong;Kim, Dong-Joon;Chang, Seong-Rok;Song, Chang-Sub
    • Journal of Welding and Joining
    • /
    • v.25 no.4
    • /
    • pp.79-85
    • /
    • 2007
  • The industrial disaster caused by a work-related disease like a Musculoskeletal Disorders(MSDs) becomes a big social problem and increases rapidly. This leads to the degradation of the labor desire and the productivity. Welding work belongs to the work with a high intensity. This paper aims to analyze the welding work in the various positions from a view-point of the burden of the human musculoskeletal system and to propose the desired position with lower burden. For this purpose the real welding work was observed in the shipyard and analyzed using the RULA method, a powerful ergonomics tool. The 3-dimensional simulation model fur this work was also developed. In this model, ergonomics human model and welding work environment were built. This model was verified through the comparison to the real work. This paper showed that the improvement of welding position by changing the location of a stool and using some auxiliary tool can reduce the work intensity remarkably and lead to the decrease of MSDs.

A Case Study of Untact Works in Logistic Service-related Worker in the Era of COVID-19 (코로나시대 물류 서비스 관련 분야 직장인의 언택트 업무 사례 연구)

  • Bae, Soo Hyun
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.26 no.3
    • /
    • pp.147-154
    • /
    • 2020
  • The purpose of this study was to research the status of logistic service-related workers about untact works by case study in the Era of COVID-19. An experimental design was used by case analysis of interviews with ten office workers from May to June 2020. The results of this research were divided into three categories: work environment, work management and work effect. First, teleworking has a significantly positive influence on business efficiency about work environment. ZOOM, One drive, Skype, Chatbot, Microsoft Teams and Remote view are used as collaborative applications. Second, work instructions in documents are needed such as e-mail and messenger using information and communication technology about work management. Third, the strong points of teleworking are both high work efficiency and job satisfaction about work effect. The weak points of teleworking are both very low-technology and misunderstanding about work effect. The result offer some insights into the case study of logistic service-related workers about untact works. Based on the results, the implications and the limitations of this study were discussed.

Novel Design of Ultrashort Pulse Excimer Laser Amplifier System II (Temporal Gain Control and Phase Distortion/ASE Characteristics)

  • Lee, Young-Woo
    • Journal of information and communication convergence engineering
    • /
    • v.1 no.4
    • /
    • pp.228-232
    • /
    • 2003
  • The previous design work for very large final amplifier pumped by electron beam module was described from the point of view of energy characteristics. In this work, the design problems for phase front distortion, ASE, and gain control in large aperture amplifier are presented in detail.

Efficient Circular Object Pose Determination

  • Kim, Sungbok;Kim, Byungho
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2000.10a
    • /
    • pp.276-276
    • /
    • 2000
  • This paper presents the efficient algorithms for the pose determination of a circular object with and without a priori knowledge of the object radius. The developed algorithms valid for a circular object are the result of the elaboration of Ma's work [2], which determines the pose of a conic object from two perspective views. First, the geometric constraint of a circular object and its projection on the image plane of a camera is described. The number of perspective views required for the object pose determination with and without a priori knowledge of the object radius is also discussed. Second, with a priori knowledge of the object radius, the pose of a circular object is determined from a single perspective view. The object pose information, expressed by two surface normal vectors and one position vector, is given in a closed form and with no ambiguity. Third, without a priori knowledge of the object radius, the pose of a circular object is determined from two perspective views. While the surface normal vectors are obtained from the first view, the position vector is obtained from the two views.

  • PDF