• 한국안전학회지
• /
• 제37권4호
• /
• pp.51-57
• /
• 2022

In recent years, the government's urban housing expansion policy has resulted in increased construction and remodeling work of residential houses and apartments, causing more industrial accidents at elevator installation sites. Typically, accidents occur during the installation and dismantling of work scaffolds inside the hoistways or using non-standardized work scaffolds due to their structural instability. In view of this, the present study deals with the development of a standardized elevator system scaffolding that can be safely installed outside the hoistway, securing the work platform inside the hoistway. An improved version of the scaffolding system eliminates the need to enter the hoistway for the scaffolding installation, thereby preventing accidents.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.165-166
• /
• 2010

In this study, it was accomplished to analyze the productivity and manpower through the activity of rebar work for the application of rational construction cost in apartment house. And the rebar work is very important in the view of the expense and safety, and durability in the construction of R/C structure. Also the rebar work is very affected with productivity owing to the lack of manpower and materials cost rise.

• 비교문화연구
• /
• 제21권
• /
• pp.7-29
• /
• 2010

Young Tolstoy, when he was an already well-known writer, accomplished his first overseas travel in 1857, which gave him imaginable opportunities to compare his country's social strata with others such as serfdom, monarchical Russia and industrial and capital Europe. The present story is, indeed, the work which is influenced by those experiences by young Tolstoy during his first journey into Europe. Written in the form of booklet-like-small-piece, rather than an artistic work, the text presents the writer's severe criticism on the world of nature and civilization. Close to the nature itself, narod are those common people for Tolstoy, and they represent love, while the nature creates a necessity to love, hope and bottomless happiness of life. On the contrary, the civilized or civilization itself is considered artificial, willy, reasonal, and erotic congruity among people. For the writer, the most unsafe and ugly, seamy side of the westernized society is a lack of necessity to unify people to people. Though in its early embryonic stage, young Tolstoy's worldview is reflected in this work, especially his sharp tongue on the western people and their society is also detected when the write imposes his message under the mask of a gypsy singer. In addition, the narrator who seems an obvious Tolstoy's mouthpiece delivers his own ideas and impression on the western world, history, art, and literature. For this very reason, the present work contains numerous signs from which the reader is able to interpret, understand, and figure out what young Tolstoy imposes for his work.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.112-117
• /
• 2017

The arc, generated by Tungsten Inert Gas(TIG) welding, is stable and provides excellent quality of the weld. Since automation is difficult, a lot of work is performed by hand. In addition, to obtain the uniform weld quality is difficult when using a base metal having a nonuniform welding line, or when welding inside a pipe. Generally, TIG welding power has the characteristic of constant-current. The welding voltage is changed in proportion to the arc length. Hence, the automatic voltage control equipment should be applied at the TIG welding system. The automatic voltage control equipment has been designed using LabVIEW software. It consists of a manufactured voltage divider circuit, and jig for moving the torch. The voltage measurements and driving of the motor were performed through the algorithm implementation in LabVIEW. Welding was conducted while increasing the arc length. In this process, it was confirmed that the automatic voltage control equipment kept the arc length constant.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.113-118
• /
• 2017

As the demand for industrial robots and Automated Guided Vehicles (AGVs) increases, higher performance is also required from them. Fuzzy controllers, as part of an intelligent control system, are a direct control method that leverages human knowledge and experience to easily control highly nonlinear, uncertain, and complex systems. This paper uses a $LabVIEW^{(R)}-based$ fuzzy controller with gain scheduling to demonstrate better performance than one could obtain with a fuzzy controller alone. First, the work area was set based on forward kinematics and inverse kinematics programs. Next, $LabVIEW^{(R)}$ was used to configure the fuzzy controller and perform the gain scheduling. Finally, the proposed fuzzy gain scheduling controller was compared with to controllers without gain scheduling.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3559-3566
• /
• 2009

종래에는 신발 부품 등을 제작하는데 주조금형을 가열, 냉각하는 별도의 가열판과 냉각판을 사용해 왔다. 그러나 이것은 금형을 가열 및 냉각하는데 시간이 너무 오래 걸리는 단점이 있었다. 따라서 본 연구에서는 기존의 가열판과 냉각판을 사용하던 방법을 대체하여 파이프 인서트 주조 금형을 사용한 신발창의 프레스 성형에 대한 적용 가능성을 제안하였다. 유한요소법을 사용한 수치해석이 금형의 온도분포 해석에 적용되었으며, 또한 LabView에 의해 그 온도를 실제로 측정하였다. 프레스 성형용 파이프 인서트 주조금형에 의해 부품을 제작하는 공정은 특히 생산성면에서 아주 효과적이라고 검증되었다.

• Journal of Welding and Joining
• /
• 제25권4호
• /
• pp.79-85
• /
• 2007

The industrial disaster caused by a work-related disease like a Musculoskeletal Disorders(MSDs) becomes a big social problem and increases rapidly. This leads to the degradation of the labor desire and the productivity. Welding work belongs to the work with a high intensity. This paper aims to analyze the welding work in the various positions from a view-point of the burden of the human musculoskeletal system and to propose the desired position with lower burden. For this purpose the real welding work was observed in the shipyard and analyzed using the RULA method, a powerful ergonomics tool. The 3-dimensional simulation model fur this work was also developed. In this model, ergonomics human model and welding work environment were built. This model was verified through the comparison to the real work. This paper showed that the improvement of welding position by changing the location of a stool and using some auxiliary tool can reduce the work intensity remarkably and lead to the decrease of MSDs.

• 한국포장학회지
• /
• 제26권3호
• /
• pp.147-154
• /
• 2020

The purpose of this study was to research the status of logistic service-related workers about untact works by case study in the Era of COVID-19. An experimental design was used by case analysis of interviews with ten office workers from May to June 2020. The results of this research were divided into three categories: work environment, work management and work effect. First, teleworking has a significantly positive influence on business efficiency about work environment. ZOOM, One drive, Skype, Chatbot, Microsoft Teams and Remote view are used as collaborative applications. Second, work instructions in documents are needed such as e-mail and messenger using information and communication technology about work management. Third, the strong points of teleworking are both high work efficiency and job satisfaction about work effect. The weak points of teleworking are both very low-technology and misunderstanding about work effect. The result offer some insights into the case study of logistic service-related workers about untact works. Based on the results, the implications and the limitations of this study were discussed.

• Journal of information and communication convergence engineering
• /
• 제1권4호
• /
• pp.228-232
• /
• 2003

The previous design work for very large final amplifier pumped by electron beam module was described from the point of view of energy characteristics. In this work, the design problems for phase front distortion, ASE, and gain control in large aperture amplifier are presented in detail.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.276-276
• /
• 2000

This paper presents the efficient algorithms for the pose determination of a circular object with and without a priori knowledge of the object radius. The developed algorithms valid for a circular object are the result of the elaboration of Ma's work [2], which determines the pose of a conic object from two perspective views. First, the geometric constraint of a circular object and its projection on the image plane of a camera is described. The number of perspective views required for the object pose determination with and without a priori knowledge of the object radius is also discussed. Second, with a priori knowledge of the object radius, the pose of a circular object is determined from a single perspective view. The object pose information, expressed by two surface normal vectors and one position vector, is given in a closed form and with no ambiguity. Third, without a priori knowledge of the object radius, the pose of a circular object is determined from two perspective views. While the surface normal vectors are obtained from the first view, the position vector is obtained from the two views.