• 치과방사선
• /
• 제24권2호
• /
• pp.427-437
• /
• 1994

Clinical examination, photometric evaluation, & radiographic analysis have been used to evaluate the asymmetry of the face. Commonly used skull radiographs to assess skeletal asymmetry include poatero-anterior cephalometries, submentovertex view, & panoramic view. The purpose of this study is the comparison of the reliance of the postero-anterior cephalometric view, submentovertex view, & panoramic view in the asymmetry evaluation. All measurements were performed on the each radiographs of 31 control group & 30 asymmetric group. The measurements are MSL(midsagittal plane)-Co, MSL-Go, MSL-Me, MSL-Al, MSL-Bl, Mn. Ramus Height(Co-Go), Mn. Body Length(Go-Me), and Total Mn. Length(Co-Me). The results were as follows: 1. The lack of either a right-sided or left-sided asymmetric dominant was found. 2. The postero-anterior cephalometric view & submentovertex view relatively agreed with each other in the result. The postero-anterior cephalometric view & submentovertex view had the clinical reliability & effectiveness in the diagnosis of the skeletal asymmetry(p<0.05). 3. The panoramic view showed more magnification compared to the other radiographs. In the vertical measurements the panoramic view had clinical reliability relatively(p<0.05). But we cannot rely on the horizontal measurements in the panoramic view(p>0.05).

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.327-329
• /
• 2004

치아 매질내에서 전파되는 광신호 해석을 위한 몬테 카를로 수치해석을 National Instrument사의 LabVIEW를 이용하여 개발하였다. 수치해석 결과 치아 조직 내 깊이에 대해 서로 다른 전파 특성을 갖는 두가지 신호를 얻었으며, 검출 신호는 약 60$\mu\textrm{m}$ 이상의 깊이에서 잡음 신호가 특성 신호에 비해 커짐으로 검출이 어려워짐을 알 수 있었다.

• 한방재활의학과학회지
• /
• 제33권4호
• /
• pp.195-201
• /
• 2023

Objectives This study analyzed the correlation between lumbar spine and pelvic body parameters measured using body shape analysis system and X-ray view. Methods Body shape analysis system and X-ray view were performed for 100 patients to diagnose subluxation using body parameters such as pelvic obliquity angle, anterior superior iliac spine to posterior superior iliac spine angle (ASIS-PSIS angle), lumbar lateral flexion angle. The correlation analysis using body parameters obtained through the body shape analysis system and X-ray view was performed by measuring the Pearson correlation coefficient, a parameter test. Results Significant correlations were observed between the values for pelvic obliquity angle, ASIS-PSIS angle, lumbar lateral flexion angle measured by X-ray view and body shape analysis system. The most significant correlation was observed in the value of pelvic obliquity angle. Conclusions Body parameters and posture analysis measured by the body shape analysis system can be used in place of X-ray view. Additional research and samples are still necessary.

• 한국초등수학교육학회지
• /
• 제24권3호
• /
• pp.259-277
• /
• 2020

본 연구의 목적은 초등학교 교사들의 수학적 신념 측정도구를 개발하는 것이다. 초등학교 교사 299명의 수학적 신념을 30문항을 통해 분석하였다: 수학에 대한 신념 12 문항, 수학 교수에 관한 신념 18 문항. 탐색적 요인분석을 통해 (n = 149) 수학적 신념의 요인 구조를 탐색하였다. 또한 확인적 요인분석을 통해 (n = 150) 서로 다른 세 모델의 요인 구조를 비교 분석하였다. 분석 결과 14개 문항으로 구성된 네 개의 요인 구조가 데이타를 가장 잘 설명하는 것으로 나타났다: 전달적 수학관(transmissive view of mathematics), 구성주의적 수학관(constructivist view of mathematics), 전달적 수학 교수관(transmissive view of teaching and learning), 구성주의적 수학 교수관(constructivist view of teaching and learning). 본 연구의 결과를 바탕으로 개발된 측정도구가 초등학교 교사의 수학적 신념을 측정하기 위한 타당성과 신뢰성을 갖춘 것으로 나타났다. 이를 토대로 본 연구의 시사점을 논의하였다.

• 한국의류산업학회지
• /
• 제2권5호
• /
• pp.383-390
• /
• 2000

The purpose of this study was to classify the somatotype of elderly women and to extract discriminant factors of the classification. The subjects were 218 elderly women aged 60-85 years old. Data were collected from 46 anthropometric and photographic measurements of each subject and analyzed by frequencies, crosstabs, analysis of variance and discriminant analysis. The somatotype was classified into 5 types according to the lateral view. The normal type was defined as the type which the plumb line passes through the cervicale and the lateral malleolus. The lean-back type positioned the plumb line more posteriorly than normal type. The swayback type positioned the plumb line at about the same line as the lean-back type, but curvature of lateral view was prominent. The lean-forward type I and II positioned the plumb line more anteriorly than normal, but the spinal curvature of the type II disappeared. As the result of discriminant analysis, significant discriminant factors of anthropometric measurement were cervicale height, anterior waist height, neck point to posterior waist length, anterior waist length. Photographic measurement were C valve, D value, ∠${\alpha}$ and ∠${\beta}$.

• 한국의류학회지
• /
• 제20권2호
• /
• pp.373-389
• /
• 1996

The purpose of this study was to classify the somatotype based on the side view and to analyze the characteristics of each somatotype. The subjects were 201 middle-aged women aged from 35 to 54. Data were collected through anthropometry and photometry and analyzed by factor analysis, cluster analysis, analysis of variance, and discriminant analysis. As the result of factor analysis for the classification of somatotypes, 6 factors which explain 80.8% of variance were extracted from 35 photometric measurement. Using factor scores cluster analysis was carried out and the subjects were classified into 4 cluster Each cluster was classified as straight type, turning over type, bending type and swayback according to its position to the relative plumb line and their side view contour. And 4 somatotypes were analyzed by theirs direct anthropometric and indirect Photometric measurment to represent physical characteristics of each group.

• 실천공학교육논문지
• /
• 제6권2호
• /
• pp.127-134
• /
• 2014

Analyzing test data of a vehicle for evaluating its emission performance is an essential process in automotive development field, yet it is intricate and tedious task. In addition, clear understanding and care are required when the analysis process is carried out. Computer software solutions significantly reduce the time and the effort for such analysis. Developing a computer routine to analyze the emission data in a vehicle test demands a complete understanding of the emissions analysis and its related details. In this paper, the principals to develop a LabVIEW analysis routine (VI) are introduced helping automotive engineers comprehend the emission analysis process of a vehicle test data and instruct them to develop similar routines for such analysis.

• 한국CDE학회논문집
• /
• 제18권6호
• /
• pp.428-438
• /
• 2013

The requirement for high performance visualization of engineering analysis of digital products is increasing since the size of the current analysis problems is more and more complex, which needs high-performance codes as well as high performance computing systems. On the other hand, different companies or customers do not have all the facilities or have difficulties in accessing those computing resources. In this paper, we present a multi-view supporting VR/AR system for providing supercomputing-based engineering analysis services. The proposed system is designed to provide different views supporting VR/AR visualization services depending on the requirement of the customers. It provides a sophisticated VR rendering directly dependent on a supercomputing resource as well as a remotely accessible AR visualization. By providing multi-view centric analysis services, the proposed system can be more easily applied to various customers requiring different levels of high performance computing resources. We will show the scalability and vision of the proposed approach by demonstrating illustrative examples with different levels of complexity.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.277-280
• /
• 2002

This paper analyze the characteristics of three multipliers in finite fields GF(2m) from the point of view of processing time and area complexity. First, we analyze structure of three multipliers; 1) LSB-first systolic array, 2) LFSR structure, and 3) CA structure. To make performance analysis, each multiplier was modeled in VHDL and was synthesized for FPGA implementation. The simulation results show that LFSR structure is best from the point of view of area complexity, and LSB systolic array is best from the point of view of processing time per clock.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.21-23
• /
• 2001

A design and analysis program is proposed for switched reluctance motor using an analytical method and a CAD program LabVIEW. The algorithm uses conventional permeance method, in which flux linkages, inductances and torques are calculated numerically. In order to analyze a dynamic characteristics of the motor, voltage control scheme is fallen and a single pulse operation is applied. 2 SRM models are analyzed under the given specifications and constraints. The results compared with measured data.