• 설비공학논문집
• /
• 제7권1호
• /
• pp.112-119
• /
• 1995

Measurements of the local heat transfer coeffcients on a spherically concave surface with a round impinging jet are presented. The liquid crystal transient method was used for these measurements. This method, which is a variation on the transient method, suddenly exposes a preheated wall to an impinging jet while video recording the response of liquid crystals for the measurement of the surface temperature. The Reynolds numbers used were 1,000, 23,000 and 50,000 and the nozzle-to-jet distance was L/d=2, 4, 6, 8, 10. Presented results are compared to previous measurements for flat plate. In the experiment, the local heat transfer Nusselt numbers on a concave surface are higher than those on a flat plate. Maximum Nusselt number at all region occured at L/d=6 and second maximum in the Nusselt number occured at R/d=2 for both Re=50,000 and Re=23,000 in case of L/d=2 and for only Re=50,000 in case of L/d=4. All other cases exhibit monotonically decreasing value of the Nusselt number along the curved surface.

• 대한기계학회논문집B
• /
• 제21권5호
• /
• pp.691-699
• /
• 1997

The effects of concave hemispherical surface curvature on the local heat transfer from a turbulent round impinging jet were experimentally investigated. The liquid crystal transient method was used for these measurements. This method, which is a variation on the transient method, suddenly exposes a preheated wall to an impinging jet while video recording the response of liquid crystals for the measurement of the surface temperature. The Reynolds number ranges from Re=11,000 to 50,000, the nozzle-to- surface distance from L/d=2 to 10, and the surface curvature from D/d=6 to 12.The present results are also compared to those for the flat plate case. In the experiment, the local Nusselt numbers tend to increase in all regions with an increasing surface curvature. The maximum Nusselt number for all Reynolds numbers occurred at L/d .ident. 6 and a second maximum in the Nusselt number occurred at R/d .ident. 2 for both Re=23,000 and Re=50,000 in the case of L/d=2 and for Re=50,000 only in the case of L/d=4. Meanwhile, as the surface curvature increases, the value of the secondary maximum Nusselt number decreases. All the other cases exhibit monotonically decreasing values of the Nusselt number along the curved surface. The stagnation point Nusselt numbers are well correlated with Re, L/d, and D/d.

• 한국컴퓨터정보학회논문지
• /
• 제22권6호
• /
• pp.17-24
• /
• 2017

In recent digital broadcasting, up to 250 channels are multiplexed and transmitted. The channel transmission is made in the form of MPEG-2 Transport Stream (TS) and transmits one channel (Video, Audio). In order to check if many broadcast channels are transmitted normally, in multi-channel multi-view system, ability of real-time monitoring is required. In order to monitor efficient multi-channel, a distributed system in which functions and load are distributed should be implemented. In the past, we used an inefficient system that gave all of the functionality to a piece of hardware, which limited the channel acceptance and required a lot of resources. In this paper, we implemented a distributed multi-view system which can reduce resources and monitor them economically through efficient function and load balancing. It is able to implement efficient system by taking charge of decoding, resizing and encoding function in specific server and viewer function in separate server. Through this system, the system was stabilized, the investment cost was reduced by 19.7%, and the wall monitor area was reduced by 52.6%. Experimental results show that efficient real-time channel monitoring for multi-channel digital broadcasting is possible.

• 한국해양공학회지
• /
• 제23권4호
• /
• pp.12-18
• /
• 2009

The present study focused on the compressibility of partially filled fluids in a sloshing tank. Filling ratios ranging from 18% to 26% were used to find compressible impact on a vertical wall. The model test was for 1/25 scale of a 138 K LNGC cargo tank. To investigate the two dimensional phenomenon of sloshing, a longitudinal slice model was tested. A high speed camera was used to capture the flow field, as well as the air pocket deformation. The pressure time history synchronized with the video images revealed the entire compressible process. Three typical impact phenomena were observed: hydraulic jump, flip through, and plunging breaker. In particular, the pressure time history and flow pattern details for flip through and plunging breaker are presented.

• Journal of Minimally Invasive Surgery
• /
• 제21권4호
• /
• pp.180-182
• /
• 2018

The frequency of anastomotic leakage after gastrectomy is reported to be 0.9~8%. To reduce deleterious outcomes of anastomotic leakage, we devised the "Omental Free-shaped Flap Reinforcement On Anastomosis and Dissected area" procedure not only to prevent fatal complications following anastomotic leakage but also to promote vascularity of anastomoses and other expected oncological benefits. This video illustrates the surgical procedure following a totally laparoscopic distal gastrectomy. After completion of the anastomosis, the remaining omentum was mobilized upward and divided into two sections. We placed the left section of the omental flap under the anastomosis between the stomach and pancreas. Finally, we grasped and curved the tip of the section to cover the anastomosis from behind, and we placed the right section of the omental flap above the anastomosis. These two sections were approximated with clips to the anterior wall of the stomach. The patient was discharged without complications.

• 공업화학
• /
• 제25권4호
• /
• pp.401-408
• /
• 2014

분리막 생물반응기에서 산기량 제어는 반응기 내 유체흐름과 특히 막표면 근방에서의 전단응력을 변화시켜 막오염 감소 및 에너지 절약을 구현하는 중요 독립변수 중 하나이다. 본 연구에서는 원통형 생물 반응기 중심에 침지형 평막을 장착하고 하부에서 공기가 공급되는 3차원적 시스템에 대하여 "COMSOL"프로그램을 사용하여 수치해석하였다. 용액의 점도, 온도는 일정하다고 가정했으며 투과액 부피와 산기량의 비인 $SAD_p$를 변수로 사용하였다. 유속센서, 동영상 이미지분석으로 측정한 유속과 수치해석 결과는 11% 이내에서 일치함을 확인하였다. 반응기 내 유체의 흐름은 산기관과 막모듈 구간에서 급격하게 증가하였으나 막모듈을 지나면서 감소하였으며 반응조 벽에서 중심축 방향으로 갈수록 유속이 증가하는 경향을 보였다. 막 표면에서 계산된 전단응력은 하단 중앙부가 가장 크게 나타났으며 산기량이 증가할수록 전단응력이 증가하였다. 특히 산기량을 0.15에서 0.25 L/min로 증가할 경우 크게 증가함을 확인할 수 있었다.

• 한국연극학
• /
• 제49호
• /
• pp.133-169
• /
• 2013

Reexamining Brecht's theoretical hypotheses in terms of cognitive science, this essay arrived at several temporary interpretations. Cognitive science implies that empathy can precede the rational understanding in Verfremdungseffekt. The spectator tends to simulate the unfamiliar incident and character and feels the consequential embodied emotion that leads to the cognitive understanding. The similar situation can be found in social gestus. According to cognitive science, gesture(social gestus) is simulated in the mirror-neuron of spectator, arousing consequently the embodied emotion that triggers the succeeding understanding. The spectator apts to experience and feel physically the moving gesture before decoding it as a social signification. Brecht's intention that attempts to reveal the duality of actor and character by eliminating the fourth wall is negated by cognitive science. According to the theory of conceptual blending, the spectator under the eliminated fourth wall mixes actor and character, and simulates this blending image so that he experiences it imaginatively. As such, another kind of illusion can be formed when a fourth wall is collapsed. Meanwhile, the critical thinking of spectator Brecht wanted can be hard to occur during the performance. It is necessary for the spectator to recollect the bygone dialogue and action in terms of social context as if he presses the pause, stopping the playback while watching a play in video. In this respect the social meaning Brecht intended can be achieved more effectively by the stop motion like tableau. It would not only give the time for the spectator to consider the implied social signification, but also make him possible to decode a semiotic meaning as if interpreting a still picture. Or it can be delivered by the dialogue that expresses the playwright's critical judgement. In this case, the subject of critical thinking is not the spectator but the author. The alternative explanation that the cognitive science suggests illuminates theoretically the reasons why Brecht's theory fails to be realized in practice. In a sense, Brecht's theory is nothing but a theoretical hypothesis. It takes the premise that the emotion hinders the rational thinking, understanding emotion and reason oppositively like Plato. This assumption is negated easily by the recent cognitive science that sees the reason as a by-product of physical experience including emotion. The rational understanding, in this sense, begins from the embodied emotion. As such the cognitive science denies the dichotomy of emotion and reason that Brecht adopted. The theoretical hypothesis of cognitive science makes us recognize again the importance of bodily experience in theatre. In theatre the spectator tends to experience physically before decoding the intellectual meaning. The spectator Brecht wanted, therefore, is far from the reality. The spectator usually experiences and reacts physically before decoding the meaning critically. Thus Brecht's intention can be realized by the embodied emotion resulted from simulation. This tentative interpretation suggests that we need to pay more attention to the empirical study of spectatorship, not remaining in a speculative study.

• 한국지반신소재학회논문집
• /
• 제14권4호
• /
• pp.87-96
• /
• 2015

토목섬유(Geosynthetics)는 도로, 철도, 항만, 댐, 제방 등의 각종 토목구조물에 보강, 배수, 필터, 분리, 침식방지 등의 용도로 폭넓게 적용되고 있다. 특히 토목섬유는 보강토옹벽이나 사면/지반 보강 등을 위한 보강용도로서의 적용이 활발하며, 최근에는 성토체의 안정성과 시공성 및 경제성 향상을 도모하기 위해 성토지지말뚝 상부를 토목섬유로 보강하는 기법에 대한 연구가 진행되고 있다. 일반적으로 토목섬유 보강재를 사용한 토목구조물의 안정성 해석을 위하여 실내 모형실험이나 현장에 적용된 토목섬유에 스트레인게이지를 부착하여 토목섬유의 인장변형을 측정하는 방법을 사용하고 있다. 그러나, 토목섬유의 제조방법과 강성도 및 스트레인게이지 부착방법 등에 따라 측정된 인장변형률 값의 편차가 나타난다. 본 연구에서는 지오그리드와 직포, 부직포 등 3가지 형태의 토목섬유를 대상으로 스트레인게이지가 부착된 토목섬유에 대한 광폭인장강도시험을 수행하여 video extensometer를 이용하여 측정된 인장변위로부터 산정한 인장변형률과 스트레인게이지에 의해 측정된 인장변형률을 비교, 분석함으로써 스트레인게이지 실측값의 신뢰성을 평가하였다. 분석 결과, 스트레인게이지 실측값은 비교적 강성이 높은 지오그리드와 직포의 경우에는 신뢰도가 높으나, 강성이 작은 부직포의 경우에는 신뢰도가 매우 낮음을 알 수 있었다.

• 폴리머
• /
• 제33권4호
• /
• pp.347-352
• /
• 2009

전자종이 등 전기영동을 이용한 디스플레이 기술에 사용하기 위한 대전 입자를 유무기 복합 형태로 제조하였다. $TiO_3$와 $Co_3O_4$를 core 입자로 사용하여 Poly(methyl methacrylate)를 분산 중합으로 코팅하였다. 또한, 코팅 고분자에 charge moiety를 부여하여 $TiO_2$ core 입자는 양전하의 복합입자로 $Co_3O_4$ core 입자는 음전하의 복합입자로 제조하였다. 제조된 대전입자는 중합 후 구형의 형태를 갖게 되었음을 전자현미경을 통하여 확인을 하였다. 대전 복합입자를 전기영동에 사용하기 위하여 전기영동 유체와 유사한 밀도를 갖도록 조절하였다. $TiO_2$ 입자의 밀도는 고분자 코팅 전후 4.02 g/$cm^3$에서 1.44 g/$cm^3$로 변화하였고, $Co_3O_4$ 입자의 경우 입자의 밀도가 6.11 g/$cm^3$에서 1.49 g/$cm^3$로 변화하였다. Urea, melamine, formaldehyde를 벽물질로 하여 흑백 입자를 각각 포함하는 microcapsule을 in-situ polymerization 방법으로 제조하였으며, 균일한 크기와 투명한 microcapsule이 제조되었음을 video 현미경을 통하여 확인하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제36권2호
• /
• pp.111-122
• /
• 2013

본 연구는 디지털방사선장비에서 자동노출제어장치 사용 시 초점-검출기간의 거리, 관전압, 구리필터의 조합을 이용해 환자의 피폭을 감소하고자 시행 하였다. 경추, 요추측면검사, 두개골 전후검사법을 대상으로 관전 압은 60~100 kV, 초점-검출기간의 거리는 100~200 cm으로 변화시키고 구리필터를 추가하면서 입사선량을 측정하고 영상을 평가하였다. 입사선량은 경추측면검사에서 90 kV, 0.3 mmCu, 200 cm일 경우에 0.06 mGy, 요추측면검사에서는 100 kV, 0.3 mmCu, 200 cm일 경우 0.40 mGy, 두개골전후검사에서는 90 kV, 0.3 mmCu, 140 cm일 경우 0.24 mGy로 가장 낮았다. 입사선량은 0.1 mmCu, 150 cm, 70 kV (경추측면검사), 81 kV (요추측면검사)로 변화 시켰을 경우에 가장 큰 폭으로 감소했다. 초점-검출기간의 거리가 늘어날수록 영상의 확대가 줄었고 180 cm 이상에서는 차이가 적었다. 두개골전후검사에서는 80 kV, 0.1 mmCu, 120 cm으로 변화했을 경우에 입사선량이 가장 많이 감소했다. 따라서 자동노출제어장치를 사용할 시 영상의 품질을 고려한 범위에서 최대한 높은 관전압을 사용하고 초점-검출기간의 거리는 검사실의 구조, 방사선사의 신체조건을 감안하여 선 검사대(Wall)에서는 150~200 cm, 누운 검사대(Table)에서는 120~140 cm으로 늘리고 0.1~0.3 mm Cu의 부가필터를 적절히 조합하여 사용하는 것이 영상의 왜곡 방지와 입사선량을 감소시켜 환자의 피폭을 줄일 수 있을 것이다.