• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2266-2284
• /
• 2012

Recent studies have indicated that a significant improvement in wireless video throughput can be achieved by Cross Layer Design with Side-information (CLDS) protocols. In this paper, we derive the operational rate of a CLDS protocol operating over a realistic wireless channel. Then, a Rate-Distortion (R-D) empirical model for above-capacity Scalable Video Coding (SVC) is deduced to estimate the loss of video quality incurred under inaccurate rate estimation scenarios. Finally, we develop a novel Unequal Error Protection (UEP) scheme which leverages the characteristics of LDPC codes to reduce the distortion of video quality in case of typically-observed burst wireless errors. The efficacy of the proposed rate adaptation architecture over conventional protocols is demonstrated by realistic video simulations using actual IEEE 802.11b wireless traces.

• Journal of Broadcast Engineering
• /
• v.25 no.3
• /
• pp.428-438
• /
• 2020

The jitter in the digital videos lowers the visibility and degrades the efficiency of image processing and image compressing. In this paper, we propose a video stabilizer architecture based on triplet CNN and a method of synthesizing training datasets based on video synthesis. Compared with a conventional deep-learning video stabilization method, the proposed video stabilizer can reduce wobbling distortion.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.5
• /
• pp.513-520
• /
• 2006

In this paper, we propose a novel real-time frame-layer rate control algorithm using sliding window method for low bit rate video coding. The proposed rate control method performs bit allocation at the frame level to minimize the average distortion over an entire sequence as well as variations in distortion between frames. A new frame-layer rate-distortion model is derived, and a non-iterative optimization method is used for low computational complexity. In order to reduce the quality fluctuation, we use a sliding window scheme which does not require the pre-analysis process. Therefore, the proposed algorithm does not produce time delay from encoding, and is suitable for real-time low-complexity video encoder. Experimental results indicate that the proposed control method provides better visual and PSNR performance than the existing TMN8 rate control method.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.123-132
• /
• 2011

Recently, DVC (Distributed Video Coding) is receiving a lot of attention as one of the low complexity video encoding techniques suitable for various applications with computation-limited and/or power-limited environment, and is being actively studied for improving the coding efficiency. This paper proposes a rate-distortion based selective block encoding scheme. First, the motion information is obtained in the process of generating side information at decoder and received through the feedback channel, and then, based on this information, the proposed method performs a selective block encoding based on rate-distortion optimization. Experimental results show that the performance of the proposed scheme reaches up to 2.2 dB PSNR gain over the existing scheme. Moreover, it is shown that the complexity can be reduced by encoding parts of region considering rate-distortion cost.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.79-85
• /
• 2010

In video standards such as H.264/AVC, motion estimation (ME) / compensation (MC) is regarded as a vital component in a video coder as it consumes a large amount of computation resources. The full search technique, which is used in general video codecs, gives the highest visual quality but also has the problem of significant computational load. To solve this problem, many fast algorithm has benn proposed. Among them, NPDS show that can maintain its video quality very close to the full search technique while achieving computation reduction by using a halfway-stop technique in the calculation of block distortion measure. In this paper, we proposed algorithm by determining minimum distortion measure with predictive motion vector and using the new search order. As the result, we can check that the proposed algorithm reduces the computational load 95% in average compared to the full search, respectively with the PSNR lost about 0.04dB.

• Journal of Korea Multimedia Society
• /
• v.8 no.12
• /
• pp.1581-1588
• /
• 2005

The primary goal of this paper is to facilitate the rate-distortion control in compressed domain, without introducing a full decoding and re-encoding system in pixel domain. For this aim, the error propagation behavior over several frame-sequences due to DCT coefficients-drop is investigated on the basis of statistical and empirical properties. Then, such properties are used to develop a simple estimation model for the CD distortion accounting for the characteristics of the underlying coded-frame. Experimental results show that the proposed model allows us to effectively control rate-distortions into coded-frames over different kinds of video sequences.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.807-817
• /
• 2016

A novel fast algorithm is suggested for a coding unit (CU) mode decision using pseudo rate-distortion based on a separated encoding structure in High Efficiency Video Coding (HEVC). A conventional HEVC encoder requires a large computational time for a CU mode prediction because prediction and transformation procedures are applied to obtain a rate-distortion cost. Hence, for the practical application of HEVC encoding, it is necessary to significantly reduce the computational time of CU mode prediction. As described in this paper, under the proposed separated encoder structure, it is possible to decide the CU prediction mode without a full processing of the prediction and transformation to obtain a rate-distortion cost based on a suitable condition. Furthermore, to construct a suitable condition to improve the encoding speed, we employ a pseudo rate-distortion estimation based on a Hadamard transformation and a simple quantization. The experimental results show that the proposed method achieves a 38.68% reduction in the total encoding time with a similar coding performance to that of the HEVC reference model.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.1
• /
• pp.321-340
• /
• 2016

The Compressive Video Sensing (CVS) is a useful technology for wireless systems requiring simple encoders but handling more complex decoders, and its rate-distortion performance is highly affected by the quantization of measurements and reconstruction of video frame, which motivates us to presents the Space-Time Quantization (ST-Q) and Motion-Aligned Reconstruction (MA-R) in this paper to both improve the performance of CVS system. The ST-Q removes the space-time redundancy in the measurement vector to reduce the amount of bits required to encode the video frame, and it also guarantees a low quantization error due to the fact that the high frequency of small values close to zero in the predictive residuals limits the intensity of quantizing noise. The MA-R constructs the Multi-Hypothesis (MH) matrix by selecting the temporal neighbors along the motion trajectory of current to-be-reconstructed block to improve the accuracy of prediction, and besides it reduces the computational complexity of motion estimation by the extraction of static area and 3-D Recursive Search (3DRS). Extensive experiments validate that the significant improvements is achieved by ST-Q in the rate-distortion as compared with the existing quantization methods, and the MA-R improves both the objective and the subjective quality of the reconstructed video frame. Combined with ST-Q and MA-R, the CVS system obtains a significant rate-distortion performance gain when compared with the existing CS-based video codecs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.10
• /
• pp.1155-1166
• /
• 2016

In this paper, we propose a new embedded video compression scheme which uses three-dimensional rate-distortion optimization based block coder. After the proposed scheme removes temporal redundancy by applying the motion compensated temporal filtering(MCTF) on input video frames, two dimensional discrete wavelet transform is applied on video frames to remove spatial redundancy. The three-dimensional wavelet coefficients generated in this way are sorted according to their expected rate-distortion slope and encoded by using the three-dimensional block partition coding method. The proposed scheme also uses both the effective color video coding method which maintains embedded features, and the efficient bit-rate control method. Experimental results demonstrate that the proposed scheme not only produces embedded bit-streams, but also outperforms existing video compression schemes.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.469-479
• /
• 2013

This paper proposes an efficient computation-aware mode decision and search point (SP) allocation algorithm for spatial and quality scalabilities in Scalable Video Coding. In our proposal, a linear model is derived to allocate the computation for macroblocks in enhancement layers by using the rate distortion costs of the base layer. In addition, an adaptive SP decision algorithm is proposed to decide the number of SPs for motion estimation under the constraint of the allocated computation. Experiment results demonstrate that the proposed algorithm allocates the computation resource efficiently and outperforms other works in rate distortion performance under the same computational availability constraint.