• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.199-199
• /
• 2005

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.95-102
• /
• 2011

Vicker's hardness and pore size distribution of mortar adhered to the recycled coarse aggregate were tested according to the strength level of original concrete of recycled coarse aggregate to find the change of mortar adhered to the recycled coarse aggregate in cement paste. The strength levels of original concrete of recycled coarse aggregate were 25.5MPa, 41.7MPa and 60.1MPa and the aggregates were used at the state of saturated surface dry condition and oven dry condition. The results of this experimentation indicated that the mean value of Vicker's hardness was increased according to age and strength of original concrete of recycled aggregate. Porosity of $100nm{\sim}10{\mu}m$ size was reduced and porosity of 6nm~100nm size was increased in cement paste.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.27-31
• /
• 2002

Quarternary $Li_2O-B_2O_3-Al_2O_3-SiO_2$ glasses were fabricated by the function of $R({\equiv}Li_2Omole%/B_2O_3mole%)$ and $K({\equiv}(Al_2O_3mole%+SiO_2mole%/B_2O_3mole%)$. The structures of these glasses were investigated through refractive index and Vicker's hardness. The refractive index increased as the increase of the polarizability in the glass network. In the region of low $Li_2O$ content, the refractive index increased due to the increase of the polarizability in the glass network but, in the region of high $Li_2O$ content, the rate of increase of the refractive index decreased due to the increase of the molar volume caused by the formation of $BO_3{^-}$ units with relatively high molar volume. And, the refractive index decreased as the increase of $Al_2O_3+SiO_2$ content with the molar volume in the glass network. The increase and decrease of vicker's hardness values for those glasses depended on the fraction of tetrahedral $BO_4$ units and it of triangle $BO_3{^-}$ units with non-bridging oxygen, respectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2003

Quarternary $Na_2O-B_2O_3-Al_2O_3-SiO_2$ glasses were fabricated by the function of $R({\equiv}Na_2O\;mole%/B_2O_3\;mole%)$ and $K({\equiv}(Al_2O_3\;mole%+SiO_2\;mole%)/B_2O_3mole%)$. The structures of these glasses were investigated through refractive index and vicker's hardness. The refractive index increased as the increase of the polarizability in the glass network. In the region of low $Na_2O$ content, the refractive index increased due to the increase of the polarizability in the glass network, but in the region of high $Na_2O$ content, the rate of increase of the refractive index decreased due to the increase of the molar volume caused by the formation of $BO_3{^-}$ units with relatively high molar volume. And, the refractive index decreased as the increase of $Al_2O_3+SiO_2$ content with the molar volume in the glass network. The increase and decrease of vicker's hardness values for those glasses depended on the fraction of tetrahedral $BO_4$ units and it of triangle $BO_3{^-}$ units with non-bridging oxygen, respectively.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.241-246
• /
• 2019

In this study, we have examined the possibility to improve the material properties and biocompatibility of the 630 stainless steel for the application of medical instruments. The evaluation of mechanical properties and biocompatibility of the 630 stainless steel were studied by aging, nitriding, SEM measurement, Vicker's hardness, tensile strength and MTT cytotoxicity using IGF cells, respectively. The results showed that the tensile strength and Vicker's hardness of 630 stainless steel was increased with aging and ion nitriding time. The cytotoxicities of the 630 stainless decreased compared with the 420 stainless on MTT cytotoxicity using IGF cells. Ion nitriding of 630 stainless led to an enhanced application of medical instruments and biocompatibility performance.

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.1
• /
• pp.13-22
• /
• 2008

This study compared tooth's remineralization using enamel surface artificially demineralized with 0.1M lactate and HCL solution using Vicker's Hardness Number(VHN) to compare CPP-ACP and remineralization of nano-sized Carbonate Apatite's initial caries. Using pH circulation models divided into 0% nano-CA, 5% nano-CA, 10% nano-CA, 10% CPP-ACP and D.W. they were treated for 5 minutes, three times a day for 14 days to get the following results. 1. There were no significant differences among the initial surface hardness of samples demineralized surface of front tooth in 5 groups. and all 5 groups' surface hardness reduced significantly after demineralization of enamel. 2. When inquiring into hardness changes through pH circulation model, the highest hardness change was in 5% nano-CA group. Also. 10% nano-CA and 10% CPP-ACP groups increased significantly. but there was no significant difference statistically. In generalizing the above experiment results, nano-sized Carbonate Apatite showed remineralization, and compared to 10% CPP-ACP group, 5% nano-CA had remineralization to artificial caries. thus implies that when we develop method to contact with tooth of nano-CA in the future, it is expected to gain synergy effect on function of saliva, a natural remineralization material.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.166.1-166.1
• /
• 2016

각종 부품의 내마모성 및 내식성을 개선하기 위해서 금속물질에 나노두께의 보호막층을 입혀 경도를 높이는 표면처리 기술이 개발되고 있다. TiN막은 기계적 경도, 내마모성 및 내식성이 우수하여 수없이 연구되어 왔으며 박막의 두께에 따라 다양한 색상표현이 가능하다는 연구도 진행되고 있다. 이러한 TiN 박막의 연구결과로 높은 경도와 강도를 요하는 절삭공구에 하드 코팅을 이용하여 높은 절삭력으로 고효율적인 작업환경을 조성할 수 있다. 기존에 연구되어 온 TiN박막은 Ar과 N2의 혼합가스 분위기에서 증착된 반면 본 실험에서는 영구자석을 이용한 고밀도 플라즈마로 높은 점착성과 균일한 박막 및 대면적 공정이 가능한 RF-magnetron sputtering방법을 이용하여 N2 분위기에서 TiN박막을 $100^{\circ}C{\sim}400^{\circ}C$의 온도범위에서 $100^{\circ}C$간격으로 열처리 후 증착하여 비교실험을 하였다. 이와 같이 제작된 TiN박막을 XRD(X-ray Diffraction)를 사용하여 결정성을 확인한 결과 온도가 높을수록 (111)방향의 결정성장이 뚜렷하게 나타났으며 그 외 Scratch Test와 HM-220(Micro-vicker's tester)를 사용하여 경도특성을 확인하고 SEM(Scanning Electron Microscope), AFM(Atomic Force Microscope)를 이용하여 박막의 표면형상을 측정하였다. 이러한 측정 결과로 향후에는 높은 내마모성 및 초경도가 요구되는 절삭공구 및 경질표면코팅이 필요한 금속산업분야에 적용이 가능 할 것이라 사료된다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.57-61
• /
• 2002

Ternary $SrO-B_2O_3-SiO_2$ glasses were fabricated as a function of R(${\equiv}SrO\;mole%/B_2O_3\;mole%$) and K(${\equiv}SiO_2\;mole%/B_2O_3\;mole%$). The structures of these glasses were investigated through Infrared transmittance, vicker's hardness, and refractive index. The results indicated : First, in the infrared transmittance spectra, when R increased, the intensities of the absorption bands around $1200{\sim}1600cm^{-1}$ resulting from the B-O stretching vibration bond in the symmetrical trigonal $BO_3$ units decreased, and these of the absorption bands around $800{\sim}1200cm^{-1}$ caused by the B-O stretching vibration bond of the tetrahedral $BO_4$ units varied. Also, the intensities of the absorption bands for the B-O stretching vibration bond in trigonal $BO_3$ units increased and these of the bands for B-O stretching vibration bond in tetrahedral $BO_4$ units decreased as K increased. Second, the increase and the decrease of vicker's hardness values for these glasses depended on the fraction of $BO_4$ units and it of $BO_3$ units, respectively. The refractive index of these glasses mostly depended on the SrO contents and only slightly depended on the fraction of $BO_4$ and $BO_3{^-}$ units.

• Restorative Dentistry and Endodontics
• /
• v.14 no.1
• /
• pp.179-188
• /
• 1989

The purpose of this study was to measure Micro vicker's hardness of 4 kinds of anterior Composite resins (Pyrofil light bond anterior, Lite-fil anterior, Photo clear fil anterior, Silux) and 6 kinds of posterior Composite resin (Pyrofil light bond posterior. Lite-fil posterior, Photo clear fil posterior, Occlusin posterior, Palfique light posterior, P-30, posterior) according to deference of depth and distance of light tip from surface of composite resin. Each composite resin was filled into Teflon tube of 5mm in diameter and 5mm in depth, celluloid matrix was covered and the light in accordance with each composite resin was irradiated in distance of zero millimeter and 1 cm from light tip to surface of composite resin for 30 seconds. Specimens were sectioned longitudinally with cutting device. Microvicker's hardness measurements ware made at the depth of surface, 1mm, 2mm, 3mm, 4mm and 5mm from the surface to deep portion. Vicker's hardness numbers were taken on each depth under 200gm load for 30 seconds with MVK-E. The following results were: 1. The highest hardness value was measured at 1 mm depth. Then the deeper the depth, the lesser the hardness was observed. 2. The hardness value of anterior composite resins is lower than one of posterior composite resins. 3. Hardness number of composite resin irradiated in distance of zero millimeter from surface of composite resin was higher than one of 1 cm from surface of composite resin. 4. The pattern of hardness change at varying depth was similar to all the experimental material with no relation to distance of light from specimen.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.505-518
• /
• 1997

The objective of this investigation was to compare the effects of water storage on the aspect of hardness and diametral tensile strengths of four hybrid glass ionomer cements(two compomers and two resin-reinforced glass ionomers) with a resin composite material. One composite resin(Degufill Ultra), two compomers(Dyract, Compoglass Cavifil), and two resin-reinforced glass ionomers(Fuji Duet, Vitremer) were used in this study. Cylindrical specimens were prepared and stored at $36{\pm}1^{\circ}C$ in distilled water for 10 minutes after set, and then tested on an Instron testing machine(No.4467) at 1.0 mm/min displacement rate. Vicker's hardness and diametral tensile strengths as time elapsed were measured after aging in water for 10 minutes, 1 hour, 3 hours, 1 day, 3 days, 5 days and 7 days at $36{\pm}1^{\circ}C$. During the test of diametral tensile strength, stress-strain curves were obtained, from which the compressive modulus were calculated and compared. The structure of four set glass ionomer cement mass was observed on SEM(Hitachi, S-2300) after being etched with 9.6% hydrofluoric acid for 1 minute. The results were as follows; 1. The hardness of the experimental group(compomer and the resin reinforced glass ionomer cement) did not exceed the value of control group(Degufill Ultra). 2. Vicker's hardness of the Fuji Duet tended to increase succeedingly, Dyract was decreased after 3 hours in water, and Vitremer was the lowest. 3. The control group(Degufill Ultra) presented progressively on increased diametral tensile strength with time, Fuji Duet were decreased after 3 days, Compoglass Cavifil and Vitremer were decreased after 5 days in water storage. 4. Compressive modulus of the control group(Degufill Ultra) and Dyract were increased sharply timely, Fuji Duet and Vitremer were increased smoothly by lapse of time in water. Fuji Duet were stronger than Vitremer. On the other hand, Vitremer exhibited the lowest toughness. 5. The microstructure of compomer was similar with that of the composite resin(Degufill Ultra), and the fillers in resin-reinforced glass ionomer cements were noticed. It can be concluded that mechanical properties of hybrid glass ionomer cements is weaker than composite resin, and that the compomers or the resin-reinforced glass ionomers can not substitute the composite resins. A plenty of considerations should be done on the application of them to the area under the loading and high wear has a little adverse effect on the mechanical properties on the water storage for 7 days. The further research should be needed to confirm the advantage of the compomer.