Search | Korea Science

Kim, Dongchul;Choi, Yongkyu
- Journal of the Korean GEO-environmental Society
- /
- v.14 no.9
- /
- pp.21-30
- /
- 2013
Because the noise and vibration regulations in domestic areas are being tightened more and more, a more environmentfriendly method than the current low-noise & low-vibration methods is needed. In this study, the characteristics of screw concrete piles for reduction of noise and vibration were explained, and during pilot tests the noise and vibration were measured. The measured vibration value is satisfied with the vibration regulations at 7.5m distance from the source. The measured noise value is exceeded over about 2dB(A) at the 15.0m distance from the source but these values are about 5~20dB(A) less than the measured values of the current low-noise & low-vibration method.
KSCI

조영곤;김희도;조준호
- Tunnel and Underground Space
- /
- v.13 no.3
- /
- pp.187-195
- /
- 2003
This case study which is to make 2-Dimension earth's crust structures clearly is about the great boring-hole blasting to provide ground vibration source of the reflected wave research on the Korean Peninsula earth's crust structures research. For this study we've done blasting twice-500 ㎏/charge per delay, 1,000 ㎏/charge per delay, and the specifications of blasting are the following - dia.: 300 ㎜, boring-depth : 100m, besides, we used the explosives and electric detonators which have sufficient detonating velocity and very excellent safety, capacity of detonating, accurate delay time. We charged explosives into steel pipe with bulk type to avoid dead pressure by ground water. And then we tested about pipe airtight and blasting to certificate which has no problem by using on this study. In the results, we succeeded each blasting in Seosan, Youngdong. For the Peak Sum Vector(PSV) around the blasting at the main points, its real measured PSV is higher 180 % than estimated PSV with USBM. In this study we can't to be analysis of vibration velocity, but to be key providing vibration source.
PDF KSCI

배춘희;원종범;조철환;박영필
- Proceedings of the Korean Society for Noise and Vibration Engineering Conference
- /
- 2001.05a
- /
- pp.473-477
- /
- 2001
In this paper, Firstly, it is shown that the high vibration and noise source of piping and pump system is the acoustic resonance. Secondly, in order to decrease the high vibration and noise of piping and pump system, the acoustic mode of piping have been changed and its effectiveness is investigated as applied it at piping system practically.
PDF

배춘희;김성휘;박영필
- Proceedings of the Korean Society for Noise and Vibration Engineering Conference
- /
- 2004.05a
- /
- pp.263-266
- /
- 2004
In this paper, Firstly, it is shown that the high vibration source of piping and pump system is the Resonanse of pump and piping system. Secondly, in order to decrese the high vibration of pump and piping system, some practical Friction damper with high damping have been developed and its effectiveness is investigated as installing it at piping system practically.
PDF

배춘희;조철환;양경현;박영필
- Proceedings of the Korean Society for Noise and Vibration Engineering Conference
- /
- 2003.05a
- /
- pp.1065-1069
- /
- 2003
In this paper, Firstly, it is shown that the high vibration and noise source of piping and pump system is the acostic resonance. Secondly, in order to decrese the high vibration and noise of piping and pump system, the acostic mode of piping have been changed and its effectiveness is investigated as applied it at piping system practically.
PDF