• 한국전기전자재료학회논문지
• /
• 제30권5호
• /
• pp.263-269
• /
• 2017

A piezoelectric cantilever energy harvester (PCEH) driven in longitudinal (3-3) vibration mode was fabricated, and its electrical properties were evaluated by varying the resistive load. A commercial PZT piezoelectric ceramic with a high piezoelectric charge constant ($d_{33}$) of 520 pC/N and the interdigitated (IDT) electrode pattern was used to fabricate the PCEH driven in longitudinal vibration. The IDT Ag electrode embedded piezoelectric laminates were co-fired at $850^{\circ}C$ for 2 h. The 3-3 mode PCEH was successfully fabricated by attaching the piezoelectric laminates to a SUS304 elastic substrate. The PCEH exhibited a high output power of 3.8 mW across the resistive load of $100k{\Omega}$ at 100 Hz and 1.5 G. This corresponds to a power density of $10.3mW/cm^3$ and a normalized global power factor of $4.56mW/g^2{\cdot}cm^3$. Given the other PCEH driven in transverse (3-1) vibration mode, the 3-3 mode PCEH could be better for vibration energy harvesting applications.

• 한국산학기술학회논문지
• /
• 제19권10호
• /
• pp.430-436
• /
• 2018

궤도보수용 특수철도차량은 열차 운행동안 철도차량의 진동저감 및 승차감 향상을 위하여 다양한 궤도틀림을 조정하는 탬핑장치를 장착한다. 궤도틀림의 선형화 작업에 대한 인적 오류를 감소하기 위하여 실제 탬핑작업의 착오를 바로 확인할 수 있는 모의 훈련연습기의 개발이 중요하다. 기존 2차원 시뮬레이터의 현실성 및 훈련효과를 높이기 위하여 본 연구에서는 가상현실 공간상에서 본 특수철도차량의 탬핑작업에 대하여 3차원 시뮬레이터 모델링을 구현하였다. 탬핑작업동안 고화질화면 작동 시 발생되는 버퍼링 문제는 고화질 다각형 모델링에서 추출한 로우 다각형의 Unwrap UVW 매핑기법을 사용하여 해결하였다. 탬핑작업의 훈련시 발생하는 인적오류는 침목과 탬핑유니트의 탬핑타인 충돌 유무를 원과 사각형 충돌원리로 감지된다. 또한 충돌과 동시에 작업운전실 의자의 진동이 발생되며, 모의연습기 화면에 침목 타격수량이 현시되므로 훈련생의 숙달정도까지 인지하도록 제작되었다. 그리고 침목위에 튀어 오른 자갈은 차량주행 안전성 심각한 영향을 미치므로 탬핑유니트에 자갈 튀는 효과를 적용하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1177-1182
• /
• 2007

This study aims at identifying the effect of preferred visual and auditory stimuli on the road traffic noise perception through the series of psychoacoustic experiments. The first experiment was designed to find the addition effect of a sound reproducing system in a square where lay adjacent to roads with road traffic noise, provide appropriate music corresponding to the varying conditions of weather in the given space. In result, it was found that the rating around the square improved toward more positive adjectives. The second experiment was designed to assess the visual effect of twelve roadsides with different landscapes on the road traffic noise perception. As a result, approx. 3 to 5 dB(A) of psychological reduction was seen in places where natural landscape was preferred, compared to the others, although the noise levels were similar. The third experiment was designed to evaluate the effect of visual screen from adjacent roads on road traffic noise perception by means of ME method in a laboratory. In result, the effect of psychological reduction was observed at 65dB(A) or lower. Especially, complete screening from adjacent roads led to 5 to 10% of loudness reduction effect, compared to non-screening cases. Finally, the fourth experiment was designed to evaluate the effect of visual and auditory information with ME method and 7-point SD rating scale in a laboratory. In result, up to 10% of loudness reduction and about 2dB(A) of noise perceptional reduction were seen at 65dB(A) or lower.

• 한국소음진동공학회논문집
• /
• 제21권6호
• /
• pp.562-569
• /
• 2011

In this study linear and nonlinear dynamic stability characteristics of a medium-size high-speed turbocharger, whose rotor is supported by two 3-lobe journal bearings, are analyzed to evaluate and identify the effects of its bearing design variables. The rotor has the rated speed of 40,500 rpm and maximum continuous speed of 45,000 rpm. At first, utilizing the linear stability analysis method, bearing designs of yielding stable or unstable LogDecs as small as possible are searched by manipulating with machined bearing clearances and preloads. As next, utilizing the nonlinear analysis method, limit cycles of the rotor responses at the rated and maximum continuous speeds are simulated to check their acceptances. Results have shown that for the turbocharger rotor-bearing system considered, the 3-lobe journal bearing design with a smaller machined clearance and a larger preload are preferred for the stable rotor responses. More importantly, since there exists a good correlation between the linear and nonlinear stability analysis results, it is concluded that firstly the linear stability analysis method may be applied to screen quickly the ranges of bearing designs for stable or least unstable solutions and then, lastly the nonlinear stability analysis method may be deployed to check an absolute motion stability in terms of the limit cycle.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 춘계 학술대회 및 국제 감성공학 심포지움 논문집 Proceeding of the 2000 Spring Conference of KOSES and International Sensibility Ergonomics Symposium
• /
• pp.173-178
• /
• 2000

Subjective correspondence among visual variables, auditory variables and vibratory feedback to a hand was experimentally examined to improve usability of a remote controller. First, we studied the correspondence among visual variables represented on a screen or auditory variables and the duration of vibratory stimulus to the subjects' hand by subjective evaluation. Subjective rating method was used in ten items; suitability, comprehensibility, ease-to-use, naturalness, variety, activity, usualness, interest, wish-to-use and feeling of pleasure. Second, to show the effects of multi-modal interface using visual sense, the sense of auditory and vibratory sense, we combined positive stereotype of visual variables and auditory variables provided with the first experiment. The results showed some stereotype between visual variables or auditory variables and duration of vibratory stimulus. Some of the variables such as size, direction of motion, hue, brightness of color and volume of sound had high correspondence with the duration of vibration.

• 한국게임학회 논문지
• /
• 제19권2호
• /
• pp.23-32
• /
• 2019

VR 콘텐츠의 대중화가 더딘 것은 시각적인 새로운 경험 즉, '흥미' 이상의 '효용'을 만들어내지 못했기 때문이다. 가상현실 콘텐츠의 효용은 기능적 현실감에서 출발하며 그것을 증진시키기 위해서 사실적인 인터랙션이 요구된다. 본 연구는 구체적으로 네트워크 플레이, 캐릭터 인공지능, 햅틱 구현의 3가지 방법을 제시하고 있다. 가설을 확인하기 위하여 기획에서부터 콘텐츠 제작, 플레이 테스트, 기술 검증까지 야구를 소재로 한 VR 콘텐츠 제작의 전 단계를 수행하였다. 최종 결과물에 대한 사용자 및 평가 기관의 테스트를 통하여 사실적인 시각 효과와 플레이 연출, 진동에 의한 타격감까지 콘텐츠의 현실감을 높이는 데 기여한 것으로 평가되었다.

• Bulletin of the Korean Chemical Society
• /
• 제21권10호
• /
• pp.1041-1043
• /
• 2000

We present the effects of temperature (between 10 K and 298 K) and of hole concentration on the frequency and intensity of characteristic phonons in polycrystalline $La_2CuO_4-related$ compounds using FT-IR spectros-copy. The influences of the concentration of carrier doped on the phonon modes are prominent in the IR spectra of $La_2CuO_4-related$ compounds. For $La_2-xSrxCuO_4({\chi}=$ 0.00, 0.03, 0.07, 0.10, and 0.15) and electrochemically (or chemically) oxidized $La_2CuO_4$, the intensities of the transverse oxygen mode around 680cm $-^1$ which cor-responds mainly to Cu-O(1) stretching vibration in the basal plane of CuO6 octahedron, are decreased and dis-appeared depending on the Sr-substitution rate and the amount of excess oxygen, while the longitudinal oxygen mode around 510 cm $-^1$ corresponding to the Cu-O(2) stretching in the basal plane of CuO6 octahedron are near-ly invariable. In particular, after two cycles of cooling-heating between 10 K and 298 K for these sample, the phonons around 680 cm $-^1$ are blue shif 13-15 cm $-^1$, while the phonons around 510 cm $-^1$ are nearly constant. The introduction of the charge carrier by doping would give rise to the small contraction of CuO6 oc-tahedron as Cu $^3+$ requires a smaller site than Cu $^2+$, which results in the shortening of the Cu-O(1) bond length and Cu-O(2) bond length with the increased La-O(2) bond length. These results in the frequency shift of the characteristic phonons. The IR spectra of $La_2Li0.5Cu0.5O_4$ which exhibits an insulator behavior despite the $Cu^3+$ of nearly 100%, corroborate our IR interpretations. The mode around 710 cm $-^1$ corresponding to Cu-O(1) stretching vibration is still strongly remained even at low temperature (10 K). Thus, we conclude that the con-duction electrons formed within $CuO_2$ planes of $La_2CuO_4-related$ superconductors screen more effectively the transverse oxygen breathing mode around 680 $cm-^1$ depending on the concentration of the doped charge carrier in $La_2CuO_4-related$ compounds, which might use as a superconductivity probe.

• 대한후두음성언어의학회지
• /
• 제21권2호
• /
• pp.133-138
• /
• 2010

Background and Objectives : High-speed imaging can be useful in studies of linguistic and artistic singing styles, and laryngeal examination of patients with voice disorders, particularly in irregular vocal fold vibrations. In this study, we introduce new laryngeal imaging systems which are commercially available high speed cameras connected with a laryngoscope. Materials and Method : The laryngeal images were captured from three different types of cameras. First, the adapter was made to connect with laryngoscope and Casio EX-F1 to capture the images using $2{\times}150$ Watt Halogen light source (EndoSTROB) at speeds of 1,200 tps (frame per second)($336{\times}96$). Second, Phantom Miro ex4 was used to capture the digital laryngeal images using Xenon Nova light source 175 Watt (STORZ) at speeds of 1,920 fps ($512{\times}384$). Finally, laryngeal images were captured using MotionXtra N-4 with 250 Watt halogen lamp (Olympus CLH-250) light source at speeds of 2,000tps ($384{\times}400$) by connecting with laryngoscope. All images were transformed into the Kymograph using KIPS (Kay's image processing Software) of Kay Pentex Inc. Results: Casio EX-F1 was too small to adjust the focus and screen size was diminished once the images were captured despite of high resolution images. High quality of color images could be obtained with Phantom Miro ex4 whereas good black and white images from Motion Xtra N-4 Despite of some limitations of illumination problems, limited recording time capacity, and time consuming procedures in Phantom Miro ex4 and Motion Xtra N-4, those portable devices provided high resolution images. Conclusion : All those high speed cameras could capture the laryngeal images by connecting with laryngoscope. High resolution images were able to be captured at the fixed position under the good lightness. Accordingly, these techniques could be applicable to observe the vocal fold vibration properties in the clinical practice.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.113-118
• /
• 2023

Maintenance of semiconductor equipment processes is crucial for the continuous growth of the semiconductor market. The process must always be upheld in optimal condition to ensure a smooth supply of numerous parts. Additionally, it is imperative to monitor the status of the robots that play a central role in the process. Just as many senses of organs judge a person's body condition, robots also have numerous sensors that play a role, and like human joints, they can detect the condition first in the joints, which are the driving parts of the robot. Therefore, a normal state test bed and an abnormal state test bed using an aging reducer were constructed by simulating the joint, which is the driving part of the robot. Various sensors such as vibration, torque, encoder, and temperature were attached to accurately diagnose the robot's failure, and the test bed was built with an integrated system to collect and control data simultaneously in real-time. After configuring the user screen and building a database based on the collected data, the characteristic values of normal and abnormal data were analyzed, and machine learning was performed using the KNN (K-Nearest Neighbors) machine learning algorithm. This approach yielded an impressive 94% accuracy in failure diagnosis, underscoring the reliability of both the test bed and the data it produced.

• 한국인터넷방송통신학회논문지
• /
• 제23권5호
• /
• pp.191-197
• /
• 2023

모바일 슈팅 게임은 PC 게임이 그대로 옮겨진 대표적인 사례이다. 현재 대부분의 모바일 슈팅 게임에서 PC 게임에 사용되었던 조이스틱과 같은 UI가 터치버튼으로 옮겨졌지만, 모바일 장치의 디스플레이가 작기 때문에 사용자의 손가락이 게임 스크린을 가리는 불편함이 그대로 나타나고 있다. 본 논문은 모바일 슈팅 게임에 있어, 작은 디스플레이의 한계를 극복하고 게임의 몰입감을 높이기 위해, 캐릭터 이동과 조준을 통합한 UI와 디스플레이 회전, 흔들기, 진동 등의 직관적 UI를 도입한다. 또한 라운드마다 지난 경기를 분석하여 캐릭터의 부족한 능력을 파악하고 능력을 보충할 시너지를 추천하여 게임의 재미를 더한다. 본 논문은 이러한 기능을 가진 모바일 슈팅 게임을 안드로이드 스마트폰에서 실제로 설계하고 구현하여 논문에서 제시한 목적들이 성취됨을 증명하였다.