• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.743-748
• /
• 2007

This paper describes a lens transmissive type tilting actuator for a projection TV. An electromagnetic analysis and a structural analysis of the tilting actuator system is necessary to design a tilting actuator for a projection TV. The tilting actuator is composed a permanent magnet, coil and yoke as the electromagnetic components and it needs a driving hinge part as the mechanical component. The design of the tilting actuator for the projection TV is performed by the following procedure. Firstly, a magnetic flux density of the tilting actuator system is analyzed by a mathematical theory and an electromagnetic FEM. Secondary, a magnetic circuit method is used to determine tilting force. Thirdly, the structural FEM is carried out with an FE model of a lens-transmissive type tilting actuator and then the prototype of the model is manufactured. The characteristic of the prototype is experimentally observed. Finally, a design for a new hinge configuration is suggested for better performance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.207-212
• /
• 2006

A dynamic analysis of a tilting actuator for projection TV is presented in this study. Generally, an excessive vibration of a tilting actuator is occurred a lowering of video quality of projection TV because of a dynamic unstability of it. Therefore, a dynamic analysis of a tilting actuator system is positively necessary. In this study, a mathematical model about a mirror-reactive type tilting actuator is presented and evidenced by experiment. A FEM model of a lens-transmissive type tilting actuator is presented and we made prototype of it. Then, it is evidenced by experiment. Besides, a design for hinge configuration of it is presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.564-568
• /
• 2006

Smooth picture module is operated by vibration to tilt the light from the DMD (digital micro mirror device) of DLP projection TV, which makes the screen of the TV smoother and DMD chip cost lower. To satisfy the vibration characteristics of smooth picture module, it is designed by optimizing moment of inertia, spring constant and damping coefficient, using structural and fluid dynamic simulation that showed a good agreement with experimental data. To reduce the material cost and moment of inertia, engineering plastic is used and the reliability is estimated. A VCM (voice coil motor) type actuator for smooth picture has to satisfy performance requirements such as higher driving force, lower power consumption, and lower cost. The initial design and optimization for VCM was performed using FE analysis. It allowed us to optimize the design of magnetic circuit of the proposed actuator to obtain higher force while maintaining a lower cost.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.835-836
• /
• 2006

For non-contact structure vibration displacement measurement system, an algorithm for image processing using high speed CCD camera is introduced. The system sets the target to the structure, take picture using camera and image processing is performed to display the vibration data. The algorithm flow is basic preprocessing, projection data generation and curve fitting to find three crossing points for calibration or one center point in limited area.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.367.2-367
• /
• 2002

영화관의 구조설계에서 중요한 고러 인자 중에서 음향적 관점뿐만 아니라, 영사기의 진동으로 인한 영상의 떨림 현상은 관람석에서 미치는 구조물의 동적 특성 문제가 있다. 이는 영사기-스크린-관람객 사이의 3인자에 대한 상대진동허용변위에 의해 지배됨을 고려하여, 이를 만족시키는 변수 등에 따른 진동허용규제치를 결정하는 절차가 필요하다 본 연구에서는 영화관의 진동허용규제치를 이들 3인자에 대한 변수들을 고려한 결정 과정을 공학적인 차원에서 정리하였으며, 복합상가 건물내의 영화판 영사실에 이를 만족하기 위한 진동 저감설계 자료에 활용하였다.

• Journal of the Korea Computer Graphics Society
• /
• v.22 no.4
• /
• pp.1-9
• /
• 2016

In this paper we present a projection mapping system onto human's moving hand by a projector as information delivery media and Kinect to recognize hand motion. Most traditional projection mapping techniques project a variety of images onto stationary objects, however, our system provides new user experience by projecting images onto the center of the moving palm. We explain development process of the system, and production of content as applications on our system. We propose hardware organization and development process of open software architecture based on object oriented programming approach. For stable image projection, we describe a device calibration method between the projector and Kinect in three dimensional space, and a denoising technique to minimize artifacts from Kinect coordinates vibration and unstable hand tremor.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.284-296
• /
• 2005

Bridge displacement measurement system using image processing is developed to overcome the contact type system inefficiencies such as heavy, expensive property and temporary construction necessity. The system is composed of tablet PC with IEEE1394 digital camera, telescope lens and a designed target mark. The key is projection algorithm where all pixels are added up for each row(column) to find out the center line. The experimental results are shown compared with a contact type system.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.439-443
• /
• 2011

Using the projection operator technique, a reduced density matrix theory for linear absorption spectrum of energy transfer systems is developed for the theoretical absorption line shape of the systems with non-Condon transitions. As an application, we considered a model system of OH vibrations of water. In the present model calculation, the OH vibration modes are coupled to each other via intra-molecular coupling mechanism while their intermolecular couplings are turned off. The time-correlation functions appearing in the formulation are calculated from a mixed quantum/classical mechanics method. The present theory is successful in reproducing the exact absorption line shape. Also the present theory was improved from an existing approximate theory, time-averaged approximation approach.

• Current Optics and Photonics
• /
• v.1 no.1
• /
• pp.23-28
• /
• 2017

The laser has been regarded as the potential illumination source for the next generation of projectors. However, currently the major issues in applying the laser as an illumination source for projectors are beam shaping and laser speckle. We present a compact solution for both issues by using a vibrating diffractive optical element (DOE). The DOE is designed and fabricated, and it successfully transforms the circular Gaussian laser beam to a low speckle contrast uniform rectangular pattern. Under a vibration frequency of 150 Hz and amplitude of $200{\mu}m$, the speckle contrast value is reduced from 67.67% to 13.78%, and the ANSI uniformity is improved from 24.36% to 85.54%. The experimental results demonstrate the feasibility and potential of the proposed scheme, and the proposed method is a feasible approach to the miniaturization of laser projection display illumination systems.

• Smart Structures and Systems
• /
• v.13 no.2
• /
• pp.281-303
• /
• 2014

In order to suppress the wind-induced vibrations of the Canton Tower, a pair of active mass driver (AMD) systems has been installed on the top of the main structure. The structural principal directions in which the bending modes of the structure are uncoupled are proposed and verified based on the orthogonal projection approach. For the vibration control design in the principal X direction, the simplified model of the structure is developed based on the finite element model and modified according to the field measurements under wind excitations. The AMD system driven by permanent magnet synchronous linear motors are adopted. The dynamical models of the AMD subsystems are determined according to the open-loop test results by using nonlinear least square fitting method. The continuous variable gain feedback (VGF) control strategy is adopted to make the AMD system adaptive to the variation in the intensity of wind excitations. Finally, the field tests of free vibration control are carried out. The field test results of AMD control show that the damping ratio of the first vibration mode increases up to 11 times of the original value without control.